Ford F-150 - 1997-2003 :: Vibration / Grinding Sound Coming From Truck When Moving Slowly And Making Turns
I have a 2003 Ford F150 with a 5.4V8 Triton 4X4. The truck is about to roll over 200K here soon. I am feeling/hearing a vibration/grinding sound coming from the truck when I am moving slowly and making turns, either left or right turns. Seems to happen more so on left hand turns. I have changed all power train fluids and filter, and still does it. I do not feel or notice the vibration/grinding when I am going straight or at highway speeds. It is only when I am moving from a stop and making turns. How to diagnose, find out, repair, fix this issue?
View 4 RepliesFord - Explorer :: 2003 - Grinding Or Humming Sound Coming From Left Driver Side Front
Alright so I'm having a problem with my 2003 Ford Explorer. I've recently noticed that when I get to above 40 mph, if my steering wheel is straight, I hear a loud kind of grinding or humming sound coming from my left driver side front. If I am going about 65 mph, it gets even louder and if I crank the steering wheel to the left, that's when it really gets noisy but as soon as I crank it to the right, the problems gone. When I do hear the hummin sound, I can feel it in the steering wheel. I have replaced al of the tires and it didn't work. Also, the car slightly pulls me to the right.
View 10 RepliesFord F-150 - 1997-2003 :: 2000 - Code P1151 Lean On Driver Side - Truck Bog Down At About 50 - 60 Mph
I have a 2000 f150 with a 5.4 past few months it has been throwing a p1151 code meaning it is coming up lean on the driver side. I just changed the plugs and it didn't work, neither did changing the fuel and air filters. cant find any vacuum or exhaust leaks. Replaced a bad injector along with the spark plugs and its still coming up lean.
The truck also seems to bog down at about 50-60 mph if i let off the gas and coast it will drop about 300 rpms. It has me confused and annoyed, i have true duals with glass packs could that be causing it?
Ford F-150 - 1997-2003 :: Truck Is Misfiring / Blown Head Gasket Cylinder 6 On Driver Side
Ok I got this truck from my mother-in-law for free with a blown head gasket cylinder 6 driver side. I did the replacement had the heads machined put it all back together by the book. Now I can't get it to fire on all 6 cylinders only 5 I think. Thought maybe bad gas (it sat since late November) put 5 gallons (over double the gas) fresh gas and half a bottle of b-12 chem tool. Dubble checked all plugs wires connections (coils plugs wires all new). I drove for about 10 miles oil pressure and temperature stayed perfect but no change in running truck shakes a lot and no real power. Don't sputter or backfire no engine codes other than imcr bank 2 open. Engine is 4.2l v-6 170k miles.
View 2 RepliesFord F-150 - 1997-2003 :: Driver Side Rear Sounds Like Brakes Are Dragging Against The Rotor
Went and got new tires on the supercrew. Went going through parking lots or simply driving i hear a loud squeal like brake pad squeal. I put brand new wagner ceramics on the truck. Also if i turn to the left the driver side rear sounds like brakes are dragging against the rotor. Whats goin on with this. The squeal will happen between 10 mph to 20 mph and the grinding noise will happen if I am cruising or turning to the left. It goes away when i apply the brakes.
View 1 RepliesFord Super Duty (1999-2016) :: Shaking And Grinding From Front Driver Side Of Truck
My truck has an intermittent shake with a grinding/binding kind of noise. It seems to happen at lower speeds, generally when slowing down and turning. When I apply the brakes or speed up it seems to stop the noise.
The rubber/plastic seal on the back of the wheel hub is loose on both drivers and passenger side but I don't think that is the problem. I'm wondering if it is the u-joints or something.
The brakes look shiny and i don't see any scratches on them so I don't think there is a rock or something in there. I have the wheel hubs in the auto setting, and it is a 4x4. The truck is a early 99 7.3L with a leveling kit and 230k miles.
Ford F-150 - 1997-2003 :: Vibration Felt In Steering Wheel / Humming Sound Coming From Driver Side Front
I have a 2003 F150 manual 4WD with 4.6L engine and 165000 miles. When i am driving i feel a vibration in the steering wheel and on floor board that intensifies when i press the accelerator. I do hear an irregular humming that sounds like it is coming from the driver side front. I checked the wheel for any play but it was very tight. i check tie rod ends, ball joints no play. i recently changed both u-joints on the rear shaft and the bearing hub on the passenger side front. Also, the steering feels a little 'wobbly' when i make sharp turns. it almost feels like it is giving. What else should i check?
View 1 RepliesFord F-150 - 1997-2003 :: 1999 - Cabin Water Leak - Small Puddle In Driver Side Rear Floor Corner
My 1999 F150 Supercab has developed a water leak which I would like to ask your opinions on. Parked on a 20 degree incline during a pouring rain yesterday, I came out to find a small puddle in the driver's side rear floor corner and about an ounce of water pooled in a little lip at the bottom of the rear window in the right corner of the window! Haven't started tearing anything apart yet (and might not be able to myself), but it seems that it is possibly the rear window seal as the window and the outside body area appear to be in good shape otherwise (no visible rust, no seal obviously dislocated, etc).
Also, don't know if it's related, the other day I jacked up the truck with a floor jack under the front crossmember but a bit off center which caused the truck to twist a bit before both wheels came off the ground. While doing this, I heard and felt a loud bang like something broke in the frame! Couldn't see anything out of place and something similar has happened before where a lug of the jack cup had shifted slightly while jacking the vehicle and it caused a loud bang to be heard, but this time it didn't quite feel like it was at the jack but further back.
Could something have "broken" in the truck that I can't quite see and thus this leak has occurred which wasn't there previously or could it just be coincidence that the bang and leak occurred so close in time to each other. I know it's hard to diagnose something like this without seeing the vehicle or really know what happened but I just had to put it out there as part of the events that occurred within the timeline for this leak.
Ford F-150 (2004-2008) :: Grinding Sound From The Front Driver Side Hub Area
About 3 months ago I started having a grinding sound from the front driver side hub area. I replaced it and it fixed the problem. I read where you should do both because he other one is soon behind it but I waited. Now I started hearing it from the passenger side too. So I replaced it today and all was good until I tested it from 4 wheel back to 2 wheel. Once I went back to 2 wheel the clicking that sounds like bearings going out to me, was back. What is it?
View 1 RepliesFord F-150 - 1997-2003 :: Truck Makes A Grinding Noise When Doing Sharp Turns
I have a 2003 f150 4X4. Whenever I go around a round about slowly, the truck sort of grind under the frame and shakes a little bit like I am in 4 wheel drive.
View 2 RepliesImpala - Chevrolet :: Grinding Sound From Driver Side Front When Braking
I have a 2003 Impala. Over the past couple of months I have had an occurance every so often, very random with my front driver side brake. In both rain and dry conditions, braking hard and just slowing to break I will hear what sounds like grinding when I brake, like you do when the pads are gone. Well, I have had the car in and the pads and rotor are fine, the place I took it to even test drove it and tried but couldn't get the sound. I posted here a while back on this issue and the view was that it might be the ABS, but when this occurs the ABS light doesn't come on and the sound is just coming from the driver side front. What my next move should be?
View 7 RepliesFord F-150 - 1997-2003 :: Grinding Noise On Passenger Side
I'm trying to find out why my truck has a grinding noise on the passenger side when my truck first starts driving for the first 1/4 mile. It stops after that or when I apply the brakes. Do I have a brake sticking or something more serious?
View 1 RepliesFord F-150 - 1997-2003 :: 1998 - Grinding Metal Sound While Turning Key?
I got a 98 f150 with a 2 year old starter in it. When I go to start the truck I turn the key and it makes a horrible metal crunching sound. If I quick stop, then turn it again, it'll start.
I saw another thread here with 'occasional grinding noise' but this just started, and happens every time I turn the key. Is it time for a new starter or should I look towards the fly wheel or something else???
Ford F-150 - 1997-2003 :: Passenger Side Brake Started Making A Grinding Noise
I have a 1997 F150 (truck in signature). In December my passenger side parking brake cable broke so I replaced both rear cables (front cable appears in good condition).
This past Friday the passenger side brake started making a grinding noise so I pulled the drum to find the self adjuster cable broken and the ratchet jammed between the shoe and the drum. I pulled everything apart and put new shoes (the pin the ratchet pivots on was broken off the rear shoe)and all new adjusting hardware (adjuster screw, ratchet, cable, and cable guide). The rest of the hardware looks in good condition (still paint on the springs and retainers). I got everything put together and took it for a test drive, it had a nice firm brake pedal (it's been a while since this truck has had a firm pedal) and great stopping power.
Took it to work today, and on the way back I stopped to pickup a package from the UPS store. I set the parking brake and put the truck in 1st like I always do. When I got back out to the truck to drive home, I released the parking brake but there was still obvious drag as I drove home (no good place to stop during rush hour), got out of the truck and it reeks of burning brakes. I pulled the driver side drum off (after it cooled), which was rather difficult, and everything looks to be in order except the rear shoe was not touching the post at the top of the backing plate. I checked and the adjuster was still all the way in, so that isn't the issue.
I pulled the parking brake cable out to slack the drum side of it (with the pedal released there is some spring tension from the pedal mechanism) and clamped it with vice grips so the cable was slacked and the shoes were then touching the post, and the drum could be installed and turned relatively easily, I then removed the vice grips and let the spring pull the tension out of the cable and the brake held firmly (requiring considerable effort to turn the drum). Is there anyway to adjust the spring tension on the parking brake cable when the parking brake is released?
Additional notes: when setting the parking brake, the pedal will only go down an inch or 2 before the brakes are locked up tight and the pedal won't move, it used to go down several inches before. also I noticed that the feral on the end of the drivers side cable (that locks into the lever attached to the rear shoe) is deformed, like the cable has too much tension on it. The cables are the correct ones for my wheel base according to Autozone but I'm starting to wonder if they are too short. Spring tension on the parking brake cable (when the brake is not set) causes the parking brake to drag. How do I get the parking brake to stop dragging? ("star" adjusters are new and adjusted all the way in).
Ford F-150 - 1997-2003 :: Clunk From Rear Of Truck On Braking
I've spent several hours over the course of the last week trying to figure out the problem I am having with my 1999 F150. When coming to a stop, there is a heard and felt "clunk" coming from the rear end of my truck. The other day, I had to brake to a stop rapidly and it felt like something had dropped out of the back end of my truck. It's 4WD with a 5.4L V8 with 240k miles. I have a fair amount of knowledge of the truck, having performed all maintenance and most repair, so if I need to check something and report back I should be able to. Also, I've owned the truck since it was new, and this is a recent development.
View 10 RepliesCorolla / Matrix 2009-13 :: Unusual Rumble Or Grinding Sound Coming From Driver Side Front Wheel Well
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 RepliesFord Brakes/Suspension :: 1997 F350 - Driver Side Rear Brake Hot
Last weekend I did a rear brake job on my 1997 F350 4wd diesel. I replaced the shoes, replaced all the hardware, replaced the cylinders and had the drums turned. I have driven the truck all week and everything has been fine. Tonight while out of town I set the parking brake to see if it was any better since the rebuild, and it was. Shortly after releasing the parking brake I drove about an hour to get home. When I arrived home by driver side rear brake, wheel, etc. was very hot. I threw water on it and it turned to steam instantly.
I suspect that setting my parking braked hard like I did (like you're suppose to) somehow caused it to drag. What is causing this and what needs to be done so that it doesn't happen again?
After reading some other posts I went out and checked my parking brake cable and found that it is not bound up that I can tell. Perhaps it did not completely release although it seems to release just like the other side. I checked it from front to equalizing bar and it is in great shape. The plastic coating is still on the wire and there isn't any corrosion the entire length. The only thing I did differently on this trip vs the one I made two days ago was try out the parking brake before I left. The last trip I could barely feel any heat on the rear wheels when I got home, this time the driver side was scorching hot.
Camry :: 2003 - Grinding Sound From Rear Brakes
I've got an 03 Camry (211K mi.) with front and rear disk brakes. I have a pulsing/grinding sound from the rear brakes. I think the pulse is from the run-out of the disk/rotor. Took it to a Toyota dealership last year and they pulled apart, cleaned and lubricated the parking brake assemblies on both sides. Brakes ran quiet for about 3 months and then the noise came back. When the climate is dry, it makes all kinds of noise. When it's humid (above 80%) or raining it's quiet. It still stops good and there is no pulling to one side or another, so I figure my calipers aren't leaking.
I bought the car used a little over 3 years ago and don't know when the last brake job was done. I was going to replace the front and rear disks and pads and inspect the calipers for cracked cups or seals. I was talking to an old school mechanic and he said something about opening the bleeder line(s) when I compressed the cups or I'd damage the ABS control. I looked at my manual and it said nothing about this. I'm not looking to replace the ABS controller because of a silly mistake on my part. Looking for info about cracking the bleeder when compressing a caliper??
Ford F-150 - 1997-2003 :: Rear Air Bags Have Been Deflating When Truck Is Sitting Idle
I have 97 F250 light duty equipped with factory rear air suspension. Truck has 180K miles. Both rear air bags were replaced about 100K miles ago under warranty (I didnt do it myself!). Both sensors and compressor are new within the last 18 months which I replaced myself. Recently, rear air bags have been deflating when truck is sitting idle. Compressor reinflates air bags as expected when struck is started but recently cannot maintain. Sprayed soapy water today on air bags and airlines and witnessed leak (due to air bubbles) at lower side of air bags on both sides. My conclusion is that air bags are culprit. Seems coincidence that both are leaking??
View 14 Replies