Ford Escape / Hybrid :: 2003 - Ignition Lock Cylinder Replacement
I'm replacing the ignition lock cylinder on my 03 Escape. The factory cylinder has the little black "wings" that nestle around the key when inserted:
The locksmith says the replacement cylinder needs to have those same wings for him to be change it. Is this correct? The auto part stores have the regular cylinder (with no wings) readily available, but the one with wings is a special-order item and I need this sooner rather than later.
Plus, the wingless one includes keys while the other appears to have none.
Ford F-150 - 1997-2003 :: Ignition Cylinder Periodically Will Stick
2000 F150 5.4 engine. The truck was running great, but it's time to sale it. The ignition cylinder periodically will stick. So, my son the genius , took a pair of pliers to force it to turn. I get home from work to move it the front yard and the PATS theft is blinking fast as I try to start it. It cranks just not start. I hear the fuel pump come on. I removed the cover on the steering column and there is no damage to the ring around the key cylinder or anything I can see, just the cylinder itself . I tried disconnecting the battery, switching relays,etc.
View 9 RepliesFord F-150 - 1997-2003 :: Coil Pack 8 Cylinder Replacement
I just bought a 2003 F-150 4.6 2valve truck. How bad is the spark plug breaking problem in this engine? I need to replace a coil pack #8 cylinder and thought I better changes plugs while I am in there. Has about 110,000 on it
View 14 RepliesFord F-150 - 1997-2003 :: Short In Steering Column - Ignition Switch Replacement?
I have a 1997 F150 that I have taken to a mechanic twice and it is still not right. I had a igination switch replaced and now when the humidity is really high
(I am Guessing), I can have the key in the house and my truck lights flash the radio is on and it sounds like it is trying to start. How hard is it to replace the igination switch myself. I believe it has a short someone in the steering column.
Ford F-150 - 1997-2003 :: 2002 - Cannot Remove The Key When Try To Turn Off Ignition
When I turn off the ignition and try to rotate the ignition switch/key to the steering column lock position it will not go all the way. It stops just before locking the steering column and I cannot remove the key. This is an automatic with a gearshift on the column. I have to reach up with my left hand to pull the gearshift lever up as if to pass the PARK position. While holding the gearshift like that the ignition switch can be rotated to lock and key removed.
I had the dealership attempt to fix this twice while under warranty with no success. After 10 years I am sick of it and would like to fix it. 2002 Ford F150 4x4 5.4L automatic on column.
Ford F-150 - 1997-2003 :: 2002 - Cylinder Misfire And A Lean Code
My truck was running fine the past few days minus a cylinder misfire and a lean code the misfire was due to a coil pack being out no big deal on that part but yesterday on 7/30/13 my temp gauge turned off my truck wouldn't go below 1k rpms and then the over heating light came on. i drove the one mile home and turned it off an hour later i went back out to my truck to get to work and it refused to start.
I decided to just hold my foot down on the gas and crank it and it eventually started drove it to work with the same symptoms. now today its doing the same thing except now the truck is broke down in the parking lot at my job the engine is flooding cause i can smell it last night i changed the thermostat. I can get so that i can get my truck up in running its a 2002 f150 5.4L 4x4....
Ford F-150 - 1997-2003 :: 2002 2WD - Rear Shocks Replacement
What is the degree of difficulty in replacing the rear shocks on a 2WD 2002 F150?
View 14 RepliesFord F-150 - 1997-2003 :: 2002 - Brake Light On After Changing Master Cylinder?
ll, I changed out the master cylinder on my 2002 F-150, disk brakes front and back w/ ABS. Bleed all the air out and bench bleed the master cylinder. I have good pedal but the brake light will not go out.
View 6 RepliesFord F-150 - 1997-2003 :: 2002 - Odometer Blacks Out Then Comes Back - Replacement?
I have read the thread on repairing cold solder joint inside the instrument cluster. How to correctly disassemble the dash to get to this ? this drives me crazy when the odometer is not there. 2002, f-150 fx4, 5.4 w/ auto. trans.
View 2 RepliesFord F-150 - 1997-2003 :: 2002 - Stock Head Unit Removal / Replacement?
I have an 02 f150 xl, I'm taking the stock head unit out and replacing it with a Pioneer 1900. I didn't buy a connector I'm just splicing the wires together, I know I shouldn't do it that way but it's to late now, what my problem is, there are three ground wires coming from the truck and the new head unit only has one ground, I just looked wiring diagrams up for both head units and that got pretty much everything done, just there are two speaker ground wires that are black and green, and then a regular black ground wire, I'm not sure if I should connect them all together or cap them separately, because I connected everything up and the head unit wouldn't turn on...
View 2 RepliesFord F-150 - 1997-2003 :: 2002 - Heater Core Slowly Dying / Replacement?
Have a '02 f150 and thinking the heater core slowly dieing. Have noticed for several weeks a nice line of water leaking onto the passenger side floor. Do you have to take off the entire dash to get to it? Will be doing replacement myself as the dealer or shop would probably kill me on labor.
View 12 RepliesFord F-150 - 1997-2003 :: 2002 - Coil Pack Replacement - Prevention To Damage?
first off this not my truck i am asking about it's my dads, he has a 2002 f150 xlt 4x4 5.4L and he replaces the coil packs all the time is there a way to prevent these from failing so often, and is there an easy way to get to the spark plug on the very back on the passenger side?
View 14 RepliesCamry :: 2005 - Ignition Cylinder Removal / Replacement
How do I get to the screws behind the ignition cylinder (where the key goes) to remove it and replace with a new one? Do i use a short screwdriver?
View 1 RepliesFord F-150 - 1997-2003 :: 2002 - Heater Core Replacement Without Removing The Entire Dash Console
2002 F150 5.4... I thought that I saw on here before a link that explained how to replace the heater core without removing the entire dash console. Looking for a link for this or get some good directions on how to replace the heater core?
View 1 RepliesFord - Explorer :: Ignition Cylinder Replaced Now 2002 4WD Will Not Start
My son has a 2002 Explorer 4WD EB that needed new valve and intake manifold gaskets. I pulled it apart this weekend (battery disconnected) and replaced (don't get me started on the passenger valve cover with that *@&$^ EGR valve in the way). He's also had issues with the key being removable from the ignition when the vehicle is still running (worn key and/or cylinder most likely). So when I put his key in to test my gasket job, it won't go in all the way. After much trial and effort, I call a mobile locksmith who has to drill out the old cylinder and rekey/replace it (keyed to use the same, single old key we have).
Now, the cylinder turns happily with the old key. In the "Run" position, all the dash lights come on as they should, but turning then to "Start", caused a loud single click, then the dash goes out, and the engine never even tries to start. Then, nothing electrical in the car works unless I disconnect the battery for about 10 mins, then reconnect. Upon trying to start, the same thing happens (good dash lights at "Run", then single loud click from the engine compartment, then nothing. It seems maybe the PAT has lost its memory of the old key?
I watched and assisted the locksmith put the cylinder and PATS antenna back together, so I know connections/placement of that is good. At this point, I'm about to lose all the money I saved on the gasket job to the freakin' ignition issue.
Ford - Explorer :: 2002 - Ignition Lock Replacement?
Lock cylinder needs replacing. Was stuck in the off position and would not rotate. Finally freed it up so I can remove the cylinder.
Question is, will the key that comes with the new cylinder need to be programed. If so how is this done?
Grand Prix :: Ignition Switch Replacement - Location Of Hole To Release Key Cylinder?
I have a 97 grand prix GTP that I am replacing the ignition switch on. I am having trouble locating the small hole on the key cylinder that I put an allen wrench into to release the key cylinder.
View 2 RepliesFord F-150 - 1997-2003 :: 2002 - When Turn The Ignition On Engine Will Turn Over But Not Start
My 2002 F150 Screw has been giving me issues when trying to start it for the last month. Sometimes it will start sometimes it won't. When I turn the ignition on the gauges all seem normal, the theft light turns solid then goes out, but engine will turn over but not start. Sometimes it will start if I leave the ignition on for 20 seconds then pull the key and try again. (this doesn't always work). I have disconnected the battery for about 2 minutes this usually works but not always.
Sometimes it will start first time with no issues. Once the the engine fires it runs fine. Another symptom is when I shut the engine off, pull the key and open the door, the chime telling me that the key is still in the ignition sounds. (but the key is in my hand)
I put a new battery in yesterday to rule that out and because the old one seemed to be getting weak. (starting issues didn't go away). I don't want to put 300+ into a fuel pump without being sure that's the problem.
Yaris/Scion & Vitz :: 2001 Toyota Echo - Ignition Lock Cylinder Replacement
The previous owner broke the key off in the ignition so I replace the ignition lock cylinder the problem is though even with the old one I can't turn the key to lock so it's stuck on acc. What I can try without replacing the entire column? Also it needs a catalytic converter, do I have to weld a universal one on ?
View 1 Replies