Ford F-150 - 1997-2003 :: 2001 - Code PO1747 - Engine And Overdrive Light Blink And Acts Like Running Out Of Fuel
2001 F150 5.4 Auto ... Truck was running excellent. Engine light and overdrive light begins to blink and it acts like its running out of fuel or water in gas. Baring made it home. Cleared the code and it comes back. Transmission seems fine.
View 2 RepliesFord F-150 - 1997-2003 :: Service Engine Soon Light Is On - Code PO156
The Service Engine Soon light is on in my 2001 F-150. I checked the code and got PO156 generic O2; circuit (bank 2, sensor 2). What are the most common things I should look at? The truck appears to be running fine, no driveability issues.
View 5 RepliesFord F-150 - 1997-2003 :: Service Engine Soon Light Came On - Code P0442
My Service Engine Soon light came on early last week and I got the code P0442- Evaporative Emission: System leak detected (small leak).
What are the most probable things I should look at?
Ford F-150 - 1997-2003 :: 2002 - Code P0340 - Service Engine Light On?
I have a 2002 f150 4.2 code p0340, ran rough, replaced cam sensor. drove after replacing and it runs fine now, code and service engine light comes on after restarting. from what i have read could this be a wiring problem?
View 4 RepliesFord F-150 - 1997-2003 :: Service Engine Light Came On - EGR Replacement Code P0402
Last week my service engine light came on. Friend checked it with his code reader. Got a P0402 code insufficient flow EGR valve. I have read several different threads on this subject on another Ford truck forum, slightly confusing me. Should I trust the code and just replace the EGR valve or do a number of other things that
1. Clean the throttle body first?
2. Test the EGR valve by blanking it off?
3. Test the DPFE valve?
4. Replace the DPFE valve instead of the ERG valve since the EGR valve rarely goes bad?
5. Only get OEM parts since after market parts do not last?
Ford F-150 - 1997-2003 :: Check Engine Light Came On - Error Code P0420
I was driving along today and my Check Engine light came on. I stopped at the nearest Advance Auto to have them pull the code and it came up with the P0420, Catalyst Efficiency Below Threshold (Bank 1). I asked what could cause this and they mentioned that the fuel that was put in could be causing it. They didn't mention any other possible causes. Any others? I'm thinking it could be the fuel because the last gas station that I stopped at and filled up at is one that I never go to, and maybe just got a bad batch of fuel.
View 14 RepliesFord F-150 - 1997-2003 :: 1999 - Check Engine Light Came On / Code P0171 / System Too Lean Bank 1
I just bought a 99 f150 and the check engine light came on with code p0171,system too lean bank 1. It runs and drives fine but has a strong smell of gas when I shut it off.
View 4 RepliesElantra XD (2001-06) :: 2003 - Intermittent Check Engine Light And Error Code P0113
I have a 2003 Elantra GLS. I am intermittently Check Engine light and error code is P0113 - Air Intake sensor issue. I can't locate where the sensor is. I don't see any wire coming of the tubing that connects the air filter to the engine.
View 18 RepliesFord F-150 - 1997-2003 :: 2001 - Got Code P0401 - Replace DPFE Sensor?
I have a p0401 generic exhaust gas recirculation flow insufficant detected code on my truck I was wondering what would be the first thing to check to get ride of this code? my truck hesitates from a stop while excelerating to several thousand rpm. should I try replacing the dpfe sensor? what does dpfe stand for? do they sell this sensor at oreilys or do you half to get this a the dealership?
View 9 RepliesFord F-150 - 1997-2003 :: SES Light Is On - Code P0171
The "service engine soon" light on my 2003 F150 Supercrew 4.6L (225k miles) just came on. The code it's throwing is P0171.
View 3 RepliesFord F-150 - 1997-2003 :: 2001 - Grinding Noise - Code P0403 - COPs Not Working?
2001 f150 extended cab flareside 4x4 4.6L v8, M5od manual, 196,539 miles this morning. the clutch slave is going out so I have some grinding and extra noise but recently the motor began to run like crap. I took it and coded it. "p0403, cylinder 4 misfire" is what it read on the obd scanner screen... I had a similar issue with the COPs not working and actually allowing water into the spark plug cylinder. I replaced them all at 100,000 miles or so with new motorcraft plugs at that time.
Fixed the problem and nothing since that time. Not sure why I did them all but I did. i was dumber 96000 miles ago. I also took down the intake and cleaned all the ports and crap out of it also. Yesterday took out #4 (on passenger firewall) and it looks fine. No evidence of leak, spark plug a light tan, firing well without problems, and even gaped properly still. My question is first I understood the p0403 to be EGR related, not cylinder #4 misfiring...seems odd.
2nd: I'd like to avoid just throwing parts at this problem. The EGR is simple enough to replace and if that's what is needed so be it. I'd rather do it right the first time. I've checked all of the vacuum lines, fittings, attachments. No leaks detected with smoke/brake fluid tests either. Good suction at the PCV, all good.
Ford F-150 - 1997-2003 :: 2001 SuperCab - Airbag Error Code 2-7 Flashes On Startup
I'm getting an error code 2-7 (flashes two times, pauses, then flashes seven times) when my truck starts up. It does this cycle twice then stays on permanently. It has only started doing this since last night when I replaced my factory tape deck with a factory Cd player from a 2002 F-150.
View 14 RepliesFord F-150 - 1997-2003 :: Airbag Code 33 - PAD Light Is Still Functional
1997 F150 - Getting an airbag code 33. PAD light is still functional. Some googling suggests a sensor in the passenger seat belt but I think mine is too old for that.
View 3 RepliesFord F-150 - 1997-2003 :: ABS Light Comes On And Off At Random - Code C1185
My abs light comes on with the code above and im looking to fix it. No I don't want to buy a new abs module. Code C1185 - Car Forums and Automotive Chat the only thing i could find remotely close is from this link for a 2000 ford windstar. Need to just comfirm that there is a chance that resoldering the joints would work in fixing the problem that would be great. The light comes on and off at random. 2001 f-150 lariat 4x4.
View 2 RepliesFord F-150 - 1997-2003 :: Check Engine Keeps Going Off And On - P0401 Code
On my 98' f250 4.6L 4x4 .. My check engine keeps going off and on, I finally pulled the code and its the P0401. The truck pings and knocks now and than and idles a tiny bit rough sometimes but overall runs good and gets the same mpg it always gets.....is this a bad egr valve?
View 2 RepliesFord F-150 - 1997-2003 :: OD Light Began Flashing / Code P1728
It is a 1997 Ford f150 5.4 4x4 extended cab 175k miles. Took a 600 mile trip, first 300 no problems, then the "od" light began flashing, the truck shifted fine so I kept going, drove for about a 100 miles then stopped for fuel and read the code, (p1728) cleared the code and drove another 200 miles, no light no problem. The whole time there was no drivability issues. Yesterday I drove all over town, stop and go traffic, locking the TC and it would also unlock, no problems all day, drivability was fine. What to do?
1. Just keep driving it?
2. Does changing fluid fix this problem?
3. Rebuild the trans, because this was just the first notice.
4. Sell it quick no light and drives fine.?
Ford F-150 - 1997-2003 :: 2000 - Code P0705 - O/D Light Flashing?
To start I was driving to work tonight and noticed the o/d "off" light flashing. it shifted hard one time then felt normal the rest of the way to work. At red lights the o/d light world turn off and about 3 minutes later it would flash again. When I got to work, I checked my code reader which gave me the p0705. I have searched around the net for about an hour and one thing i am seeing is that the fluid is "hot" or that there isn't enough. i have checked it and it looks slightly low like right above the add indication.
The only sound I here from under the truck is a rattle when in drive and at idle, but once I give it some gas it goes away. On they way home that night the o/d light was still flashing but it drove fine just at higher rpm, it down shifted hard one time but there were no other issues. I checked the fuses and they are all good.
Ford F-150 - 1997-2003 :: ABS Light Illuminated On Dash - Code C1206
My amber ABS dash light in my 2003 F150 came on the other day. I changed out the rear pumpkin sensor, ohmed the front wheel sensors (they were within specs posted in FTE forum) and changed out the master cylinder pressure switch under the hood (my left/rear bulb was burnt out around the same time the ABS light came on). After doing all this the light remains....so I had the ABS code read and mechanic advises code C1206 was present. He recommended replacing the "dump valve on the frame rail". He also advised this is a very expensive fix so I might just want to live with the light being on all the time. What should my next steps be to get rid of the ABS light and get my ABS system working properly?
2003 F150 SuperCrew 4X4
4.6L V8 , 285/75/16 tires , 127K miles
Ford F-150 - 1997-2003 :: 2000 - ABS Light Comes On A Few Minutes After Driving But No Code
2000 F-150 Triton V-8, Super Cab, 2WD, ~170,000 miles, 4-wheel ABS (one speed sensor on each front wheel and one on the rear differential). The ABS light comes on a few minutes after driving. It seems to take a little bit longer for the light to come on when the weather is colder.
I used a Cen-Tech 60794 OBD II/CAN with ABS scan tool with key on, engine off, and the below sequence. No codes were detected. I then left the scanner connected but powered off and drove around until the ABS light came on. Pulled into a parking lot with engine running, powered up the scan tool and went through the following menu choices:
Diagnostics
ABS
Area - USA vehicles
Model - Ford
Although the tool's instruction manual has several more items that may or may not be required (VIN digits, model year, etc), the next thing I saw is a message indicating the scanner is linking with the vehicle computer. During that time the ABS light went out. Next on the scan tool display my choice was to read codes or erase codes. I selected "Read codes" and the display said there are no codes in the module.