Ford F-150 - 1997-2003 :: How To Make Factory Radio Not Dim With Headlights On
Plain and simple. 97 F150 with factory radio and cd changer. Just wanna know what wire to cut on the factory harness to make the radio not dim when I turn on the headlights. Or is there more to it than that?
View 11 RepliesFord F-150 - 1997-2003 :: Factory Tach Needle Hanging Up
I've got a 97 f150 with 4.6l and my factory tach needle hangs up. Sometimes doesn't move at all and I can tap on the tach and it will work ok. Then I check it and it is stuck in the 2000 to 3000 rpm range. Can I take it apart and clean it or won't .....
View 2 RepliesFord F-150 - 1997-2003 :: 2001 - Factory Sliding Rear Window Leaking
2001 F150 Supercrew Lariat, the back window is the factory sliding window, it is leaking around the top on the drivers side, leaks bad. Question is how easy is it to remove the window and replace the seal?
View 10 RepliesFord F-150 - 1997-2003 :: E-Brake Cable Pulled Through Backing Plate
I replaced the driver's side e-brake cable on my 99 F150 due to the cable pulling through the backing plate (I think the backing plate hole either wore or rusted out bigger). The new cable is doing the same thing and now I cannot drive because if you depress the e-brake one time, the cable gets pulled through the hole, then since it won't come back out of the hole, pushes the brake shoe against the drum and, thus, drag. I was thinking of trying to find a C clip to hold the cable out but it's iffy at best.
View 4 RepliesFord F-150 - 1997-2003 :: Rear Driver Shock Mount Plate
I recently broke my rear shock mount plate, it is rusted to crap. So I need to fix it, I was gonna weld it but there isn't enough metal to weld. It looks like it can bolt in bolt out. I am having trouble find a replacement.
View 3 RepliesFord 6.7L Power Stroke Diesel :: Replace Factory Original Brake Pads At 199,564 Miles?
So, that means I have put 106,104 miles on my truck this year, and missed about 7 weeks for the truck being in the shop, could have been another 17,000.
So, it's time to replace the factory original brake pads?
Passat (B7) :: How To Replace Factory Headlights
So I bought a pair of the WinPower headlights and I can't find any posts of a How To remove the factory headlights. Looking for a link so I can finally change them out.
View 7 RepliesPassat (B6) :: How To Replace Factory Xenon Bulb
I Need info on drivers side bulb replacement , its a Xenon bulb and no where online have I found any info on this , only the standard h7 bulb is covered.
The problem I have is the access cover to the bulb cant be removed so I need to know if the bumper and lamps need to be removed?
Passat (B6) :: 2006 - How To Replace Factory Radio / CD System
I got a OEM GPS,TV,DVD,BLUETOOTH, iPod controller ALL-IN-ONE device and donot know how to install. My car is 07 passat and I read a thread showing 2006 Passat Radio Removal Write-Up... If I wanna go further, what else I have to remove so that I can do more wiring jobs.
View 5 RepliesImpala - Chevrolet :: 2002 - Getting Gas Cap Code Off - Replace Factory Gasket?
I've been getting the gas cap code off and on for years now. I can wash the gasket off and it goes away for a few months, but then it returns. The cap itself is in showroom condition. It's just the rubber gasket/ring that appears to be "segmented" all the way around.
Replace just the gasket on the gas cap for this vehicle? I know I can buy a whole new AC Delco gas cap from Rock Auto for $20, but to me that's wasteful. Looking at the cap, I really can't see how it comes apart, though. No visible screws, but it must separate somehow ... or would you just use a pick and pull the gasket up and off that way?
Lexus ES 2007-12 :: How To Replace License Plate Bulbs
I'm trying to change my license plate bulbs to LED but cant figure out how get to the bulb. I've already removed the carpeted cover but cant seem to figure out how to get the bulb out..... 2007 ES350....
View 3 RepliesLexus LS 2007+ :: Possible To Replace Factory Air Suspension With Regular Shocks / Struts?
Got an 06 with factory air shocks. All of the air shocks need to be replace. Possible to just put in factory shocks or struts?
View 2 RepliesFord F-150 - 1997-2003 :: Swapped 2001 5.4 To Replace 4.6 - No Start
We have a 1997 f150 with the 4.6 in it originally. The 4.6 was pulled and a 2001 5.4 engine was swapped. I was called to see why it could not run. I did some preliminary tests and suspected the PATS system.
I cannot get the fuel pump to run by jumping the relay and I am assuming all the wiring is proper from the swap.
The 2001 5.4 engine ecu has been transferred over. I run the obd tests and get a bunch of codes but none point to the pats system. The theft light does not prove out or does not flash. I can get it to turn on via my obd scan tool. I have an elm tool.
I do know the 1997 cluster was not changed. The ignition from the 2001 was swapped and have only 1 matching key with it.
When I jumped the fuel pump relay, I produced the code p0232 which tells me the computer saw current in the pump circuit when the PCM has it disabled. Should a swap of this kind also include the pats components ? I also cannot get the fuel pump to run by jumping the relay.
I have the codes :
P01703
P0232
P01747
P0750
P0755
p1451
P1409
P1633
Ford F-150 - 1997-2003 :: Replace Blend Door Actuator?
Whenever my A/C is turned on, it blows nice cold air. As long as the blower is on "1", "2", and sometimes ", it blows cold air. If I turn it to "4" I can hear a small "thud" behind the dash. It sounds like the blend door is shutting. All my functions work like they should. I think the actuator is goin out and isn't pushing the door all the way closed, and when I turn it to "4" it pushes it te other way.
View 5 RepliesFord F-150 - 1997-2003 :: How To Replace Broken Ignition Actuator Rod
1997 Ford F-150 4X4 ignition Actuator Rod. Looking for instructions on how to replace a broken Actuator Rod? I know the rod is broken because the upper part moves and the lower part connected to the switch does not move.
View 4 RepliesFord F-150 - 1997-2003 :: 2000 - Overheating Above 55 Mph - Replace Engine?
I own a 2000 F150 4.2L (I think off the top of my head) v6 XL model. For the past couple of years I've had an issue with overheating. So far I've had the following replaced:
Radiator
Thermostat
Radiator Cap
Water Pump
The intake manifold has been repaired, that was the first item to have some work done to it. The shop I took it to said the coolant hose that runs into the manifold was corroded at the entrance to the manifold. They stated there was no way to actually replace the hose, but they gave me two options:
1. replace the entire manifold or
2. cap the existing entrance port, drill a hole into the manifold next to the port, and run a new hose.
I chose the cheaper option which I suspect is part of the problem. Now to the problem.
I can drive around town all day long no problems even in 100+ degree Oklahoma summer heat. I left it idling on the side of a street for 2 hours during summer and no problems. The moment I get the truck to 55mph it starts to overheat. Not just overheat, but peg completely out in just over a mile after hitting 55mph.
Once I drop the truck down to about 40mph the temp starts to lower, but will fluctuate between normal and 3/4 to max.
What I need to look at? I've been told head gaskets, but there's no leaks and no water in the oil. I've been told to replace the engine, which if I could afford that I could afford a down payment on a new truck. It's a bit frustrating at best.
Accent MC (2006-11) :: 2009 - How To Replace License Plate Light
I found some threads about changing the license plate light on a 2009 Hyundai Accent and all of them involved removing the plastic trim inside of the hatch. However, I saw a few people mention that they broke a few plastic clips. I want to prevent breaking any clips.
Also, this ( hyundai-forums.com/184-mc-2006-2011-accent/94825-2009-accent-replacement-bulbs.html ) thread says that the replacement lights for the license plate are 168 or 168LL, but other posters say that they replaced them with white lights. What code are they?
Tiguan :: 2013 - How To Replace Factory Low Beam Projector Style Headlight Bulb
I have searched high and low, and I cannot find how to replace the factory low beam projector style headlight bulb on my wife's 2013 Tiguan SEL. It came with the factory LED style HID lights. There were a ton of videos and how to's for the regular Tiguan headlight replacement, and for aftermarket Ebay LED ones, but I can find anything about how to replace the factory low beam projector bulb, other than "take it to a dealer". My thinking is 'if the dealer can do it, so can I'! There has got to be a way. I can't get the wire bulb retainer loose, or get the bulb out of the headlight housing.
View 2 RepliesFord F-150 - 1997-2003 :: Transmission Cooler To Replace The Small Stock One?
Is it suggested for transmission cooler to replace the small stock one? I'm going to get towing stuff soon and just want to make sure I'm not smoking my trans. There's a few I've seen....
View 1 Replies