Ford 6.7L Power Stroke Diesel :: Power Loss - Code P0401 - EGR Cooler Is Clogged
My 2011 has 62k miles and has been throwing P0401 codes, which results in losing power. I assume the EGR cooler is clogged. So I went to the dealership to see if it's covered, and was told there's no warranty coverage.
I would rather blockoff the EGR cooler than repair it. I would also like the extra performance from a tuner like the MiniMaxx. I do prefer the stock exhaust and not real excited about the drone/smell that comes with deleted DPF.
Will I have issues if it's tuned with the EGR blocked off, and stock exhaust? Or am I better off doing a full delete at this point?
Ford - Explorer :: 2002 - Power Windows Only Work For Driver
How to get into that bundle of wires going between the drivers door and body for a 2002 Sport Trac? I have a break in the wire that feeds 12v to the passenger windows. If I push the bundle backward the windows work. The flexible rubber jacket goes into a plastic housing and I'm not sure if I need to pull off the door panel and un-hook or unscrew it. Is there a connector inside that plastic thing?
View 2 RepliesFord - Explorer :: 2002 - Power Gas And Brake Pedals Are Not Working
I just bought an 02 Eddie Bauer 4.6 4x4 for my mother in law. The power gas and brake pedals are not working. Worse than that the gas pedal is stuck all the way forward (firewall) and the brake pedal is stuck all the way up high(towards the seat) They do try to move, so the switch is working. How do I get them even again?
View 4 RepliesFord 6.0L Power Stroke Diesel :: Oil Cooler Clogged
I just replaced my oil cooler and 500miles later its clogged again. Delta reached 40F.. No fun... I replaced it with the factory ford cooler and installed the coolant filter but I guess when I did the first flush I missed sum gunk.
So my question to you PROs, should I reflush/restore again then replace the cooler? OR Go with one of these??
- Coolant-to-Liquid Oil Coolers
- IPR External Oil Cooler Kit for Ford 6.0 Powerstroke
The budget is tight, but I gotta keep the truck going.
Camry :: 2002 Not Starting - Front Exhaust Manifold Was Clogged
I was working with a friend for his 2002 Camry with a 3.0 and while looking at it he said the front exhaust manifold was clogged (The dealer told him) So I change it and tried starting it and it sounded like it was going to start then nothing. He had a timing belt put on a year ago by a dealer and it has been sitting since January. Mean while the Mice have been making themselves home and I am wondering if they got into the timing cover and did something to the teeth on the belt to make it back fire. I just put new spark plugs in and it still back fired.. Or is it coil packs.. You definitely see gas on the old plugs and smell it to..
View 2 RepliesFord 6.0L Power Stroke Diesel :: Cranks But Won't Start - All Filters Clogged
Couple weeks ago fuel tank started coming apart clogged all filters. Replaced tank filters and fuel pump and blew out all of lines. Started and ran fine. Stays plugged in over night but now it'll crank but wont start. No codes showing up or anything...
View 1 RepliesFord 6.7L Power Stroke Diesel :: Exhaust Filter Clogged Message On Display
My truck started to display exhaust filter clogged and cleaning exhaust filter multiple times today. The cleaning exhaust message stayed on until I hot OK and then it comes back later. Not sure what this means?
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Clogged Fuel Pick Ups In Tank
From diagnosis we are pretty sure we have clogged fuel pick ups in the tank of my 99 7.3 Dually. So in I go to clean and repair or replace depending on what it looks like once we get in there.
We have most of the fuel out of the tank, pumped out just over 30 gallons.
I don't have a lift so this is being done on the ground, any easier way ? The bed bolts look pretty rusty and funky but we have been spraying them down with Kroil, the magic elixir, for a couple days to see if that will ease the removal of the fasteners.
Take the Bed Off and work with the tank in the frame or drop the tank out and work away from the truck ?
Ford 7.3L Power Stroke (1999-2003) :: Rear-End Vent Hose Clogged
Mine was clogged again, and I check it every month.
View 14 RepliesFord F-150 (2004-2008) :: Taking Off Cats?
I went to a couple custom exhaust shops to see about duals for my 04 f150. they gave me a price all were different ranging from 250 to 480 for the same set up. Cat back flow master 44 series dual out the back. I asked them if they can take the cats off and they said no and it would lose performance. is this true? i saw a couple videos on youtube.com and there was some with no cats. I kinda want to get true duals. So is it possible or not for this truck.
View 14 RepliesFord 6.7L Power Stroke Diesel :: 2016 F350 - Metal Shavings Clogged One Of The Injectors
I have a 2016 F350 disel with 2500 miles. It's at the dealer now they are telling me some metal shavings clogged one of the injectors. What should I be looking for?
View 14 RepliesFord 6.0L Power Stroke Diesel :: Clogged Oil Cooler - Fan Kicking On Under Normal Driving Without A Load
I know I have a clogged oil cooler and normally I'm not home much during the summer months to know how it does during the summer. The outside temperature is around 95*, but the thermostat on the Ex is reading from 102 to 112, and it actually read 122 yesterday. Also, with the hot weather, I'm not noticing the fan kicking on under normal driving without a load. The AC is working, but it's not the ice cold AC I'm use to and does get better while cruising down the highway.
View 2 RepliesFord Exhaust System :: Removing Cats - O2 Sensor Will Be Effected?
I am getting my truck back today after all the work that has been done to it over the past 3 weeks, and well, I have always wanted to gut my cats, but have been worried to waste the cats buy gutting them and didnt want to cause a disturbence in the airflow by gutting them, so i figured atleast if i was aching to be illegal and gut them, the least i could do is just remove them, but my question is, will it mess the o2 sensors up? Currently the o2 sensors arnt connected to the cats at all, so my feelings is it wouldn't mess with the truck or would it? I was thinking of just removing the two cats in the true dual, and replacing the segments with pieces of pipe, would that be sufficient?
View 12 RepliesExplorer :: 2002 XLT V8 - All Locks Not Functioning But Have Power
I have a 2002 Ford explorer XLT V8. My door locks recently stopped working, including all switches to lock and unlock, and the rear glass hatch lock. My alarm comes on when I hit the buttons on the remote, but the key pad and switches don't do anything. There is a click coming from a harness that is above the rear passenger seat belt so when you use the remote and the switches so I know power is getting to that point at least.
View 1 RepliesFord Exhaust :: 1997 F250 - High Flow Cats Performance?
Would a high flow cat on my 97 f250 7.5l make any more performance and would it make it any louder? My truck has the air tubes on it so its hard to find a cat for it.
View 4 RepliesPassat (B5) :: Fuel Line Clogged - Lost Power After Stopping At Red Light
Today on the way to work at a red light I'm stopped light turns green I try and go and no power in fact when I hit the gas my rpms go lower first thing I think is I fried the clutch but it idles fine an when I hit the gas rpms go down and the at wants to bog out. Then after I get it towed home I try and crank it over it doesn't start. My thinking then is fuel. So I go to check the fuses everything is fine when I try and crank the car to start it you can hear the fuel pump kick on and then when I go to turn it over I only have crank so could it be the fuel line is clogged? I thought that if it was an injector it would start and just smoke bad. It's a 1.8t Aeb engine and yes I change my oil every 3 k miles and do all the work myself.
View 7 RepliesIS F (2008-2014) :: Deleting Cats From Stock Headers?
Deleting the cats from the stock headers ? would there be any power gain or loss ?
View 14 RepliesGolf IV R32 :: P0420 And P0430 Pulled Back After New Cats
So I was getting p0420 and p0430. I installed new hi flow cats on and did coil pack 1 & 3 since I was getting misfires there. Erased the codes after all the installs and they stayed off. It's been a little over a month later since the installs and my CEL came back on, scanned it and I'm getting same 2 codes again
View 10 RepliesIS F (2008-2014) :: Welding High Flow Cats To Stock Headers?
how much HP is there expected to be with adding high flow cats?
View 14 Replies