Ford Excursion :: 2001 - Fog Lights Quit Working With Parking Lights On
I have a 2001 Excursion, 6.8 V10, with the factory fog lights.
The fog lights worked fine, until a few days ago until they suddenly stopped working when just the parking lights are on.
I can still pull out the switch, the indicator light does not come on but the parking lights still work. When I turn it to the headlight position with the switch pulled out everything comes on and works like it should.
I tried checking the fuses but I didn't see one labeled in the manual for the fog lights so I don't know for sure which one to check. Could I possibly have a bad switch?
Ford Wiring/Electrical :: 2007 F350 - Parking Lights Won't Work
I am beginning to think that I need a whole forum dedicated to my trucks wiring issues ... I finally got my reverse lights to work but my newest issue Is that while driving tonight i lost power to my parking lights, my instrument cluster lights, and my heat control lights... everything still works inside (gauges all act properly but they won't light up) and i still have turn signals and brake lights, and headlights. I really don't know where to start with this one. I don't have an owners manual so i can't figure out what fuses to check or what relays to look at. It is a 2007 f350 diesel....
View 9 RepliesPrius (2004-09) :: 2006 - Tail Lamps Do Not Work
1. Neither tail lamp lights
2. License plate light works
3. Front parking lights work
4. Both tail lamp bulbs are fine (visual and continuity both check)
5. No power at the bulb socket on either tail lamp
6. Tail lamp ground in both bulb sockets is fine
7. Fuse under dash is not blown
8. All brake lights work fine.
9. All other lights working.
Ford Super Duty (1999-2016) :: Parking Lights Or Headlights Not Working But Turn Signals Work
I'm having problems with my front marker lights. The turn signals work but when I turn on the parking lights or headlights they don't work. They only work with the turn signals. And I can't get the front side marker lights to come on. I've tried everything...
View 2 RepliesFord Super Duty (1999-2016) :: 2000 F250 - Parking Lights Not Working After Electrical Work
2000 F-250 Super Duty
I was replacing my headlights, which required me to splice in their lights to my parking lights, and I seem to have shutdown ALL my parking lights. I did a test after twisting my wires together and everything worked fine. Then I soldered and heat shrunk them and somewhere during that process I lost all the parking lights.
I checked the 8th fuse as per the manual (for Parking Lamps) with a multimeter and it checked out just fine.
Figured it was the time to ask the experts on here where I should go from here. Are there some other fuses I could be missing, or maybe some else I could do?
Solved: Bad fuse in the #8 slot in the Power Distribution Box (under the hood, near Cab, driver's side)...
Prius (2010-12) :: Tail Parking Lights Don't Work
Ive got a '14 Pip, no new mods all my mods are atlas 6 months old. When I turn on my headlights at night and make sure the dimmer switch, by the fuel tank button, inside the cabin, is dimmed, the headlights work, the front parking lights work, the brake lights work ( WHEN I STEP ON THE PEDAL), but they don't turn on when I just have the parking lights on with out braking. So, to clarify, the parking lights (the two strip that are used as brake lights (led)) they don't turn on. what could it be? Some fuse? I made sure to cycle the column stalk switch a few times, and the dimmer switch a few times. Could removing and reattaching battery fix it? Should I take it to the dealer (~85k miles).
View 17 RepliesGolf IV R32 :: Front Parking Lights Won't Work After Installing Euroswitch
Installed the euroswitch yesterday because I want the parking lights to work in the front. All the lights work except for the front parking! In the second click I have the rear but no front. Am I missing something or do I have a bad euroswitch?
View 12 RepliesSubaru - Legacy :: Low Beam Lights Do Not Work And Dash Parking Break Light Will Not Go Out
I have a 2000 legacy wagon (245k miles) that has a light issue. The running lights and low beam lights do not work and the dash parking break light will not go out. Earlier I had just the low beams not working. They were both blown and I replaced them about two weeks ago. Now they are out again and the dash parking break light stays on. I checked the fuzes and they look good.
View 8 RepliesFord Excursion :: Right Turn Signal / Hazard / Brake Lights Do Not Work
I have a 2003 V10 Excursion with an electrical problem. The right turn, right brake and right hazard light do not work but the flasher makes the clicking noise. When the right turn signal is on, the right front turn signal light works but is at double speed. The right rear light does not work. Same when brake and hazard are applied.
I checked the bulb socket with a multi meter and have no current. I also checked my trailer plug and have all functions work. Fuses were checked also for the brake circuit and were all ok.
Ford Excursion :: No Turn Signals / Hazards Work But When Press Brake Tail Lights Just Blink
I have checked all fuses, checked wires on top of steering column all checked out ok. Hazards work but when I press brake tail lights just blink with no brake light but the 3rd brake light works??? Signal switch maybe??
View 14 RepliesFord Super Duty (1999-2016) :: 2002 - Any Way To Have Fog Lights On With Parking Lights?
I was wondering if there was a DIY mod so I can have my foglights on with my parking lights and my high beams..
View 7 RepliesPassat (B5) :: 1998 - How To Make Front Fog Lights Available In Euroswitch City Lights (Parking Lights) Mode
1998 Passat 1.8t B5 sedan. OEM fog lights up front. No rear fog lights.
I recently upgraded to a "Euro" light switch to get more flexibility with my lights. Put tape on the TFL pin to disable DRLs in OFF Mode. Put tape on the 56d pin to disable DRLs in CITY LIGHTS (Parking Lights) mode. Completely successful -- no DRLs, just as taping the TFL pin on the original light switch accomplished long ago.
BEFORE I did any taping this time, I installed the Euro switch AS IS and tested all of its modes and physical positions:
(1) OFF: No fog light position available (switch knob will not pull out). As expected and okay.
(2) FULL ON Fog lights come on (but who the hell can see them?!?) when switch knob is pulled out one stop into the fog light position -- and the little front fog symbol on the switch lights up. Again, expected and just fine.
(3) CITY LIGHTS (Parking Lights): The fog lights position is physically available by pulling the switch knob out one stop... BUT THE PARKING LIGHTS DO NOT COME ON (regardless of ignition switch position, emergency hand brake position, etc., etc.) And the little fog light symbol on the switch does not light up. (Not surprisingly, pulling the knob further out to the REAR fog light position does nothing either.)
THIS IS NOT GOOD - since with a Euroswitch one ought to be able to manually select and de-select the fog lights while in CITY LIGHTS (Parking Lights) mode!
How to make my FRONT FOG LIGHTS available in Euroswitch CITY LIGHTS (Parking Lights) mode...?
Ford Ranger / B-Series :: 1996 - Brake Lights Will Not Work But All Other Lights Do
My brake lights will not work but all other lights do, bulbs and fuse have been replaced.
View 2 RepliesFord Excursion :: 2000 - Parking Brake Light On?
So my 2000 Ex started showing the parking brake light as if the parking brake was on...however it is not. How, or what do I need to do to fix it?
View 14 RepliesFord Excursion :: Parking Brake Light On Intermittently?
I've been having a problem lately where I'm driving down the road and the brake light comes on and starts binging. I stop push the parking brake and release it a few times, then the light goes out and I'm on my way. Sometimes when I first release it the light doesn't extinguish and sometimes it is never on. I'm guessing there is a switch somewhere for the parking brake that isn't working so great. Is it around the pedal or somewhere in the brakes themselves? Is this a typical problem?
View 14 RepliesFord Excursion :: Parking Brake Cable Snapped?
When I set the parking brake last night, there was a loud pop and the pedal suddenly went soft to the floor and would not spring back when I pulled the release. The pedal doesn't spring back up when I pull the release lever, but I was able to pull it back up by hand to get the dash light to go out. That works, but without the tension from the brake cable the pedal works back down and the dash light comes on.
When I got out of the driver's seat, there was a cable laying on the ground right under the front door. The cable snapped right in front of a metal cable joiner. What is involved in fixing this?
Ford 6.7L Power Stroke Diesel :: 2013 - Install Flashing LED Lights To Work In Conjunction With Hazard Lights?
I have a 2013 6.7l super duty Lariat. I want to install flashing LED lights to work in conjunction with the hazard lights. The leds have their own controller and will be separate from any other lights/wiring. What I need is some way to trigger a relay to turn on the led's. Was hoping to tap into the hot lead off the hazard switch itself but that's not an option!
View 2 RepliesFord Excursion :: Stuck And Screaming Parking Aide Sensor?
I got a stuck and screaming parking aide sensor. Hit reverse and it its screaming full bore. Good news is I installed that manual override button last year for use when hitching the trailer, so for now I have the entire thing shut off. So I read some on this issue on the forums and have tried to listen for the one that's clicking, don't hear anything clicking, cleaned them all. Any other electrical issue that could cause this or how I trouble shoot to narrow down the bad guy? Two of them are pretty easy to get out the other two are a PITA so I had to have to pull them all. Especially with it being below zero, even the garage heat full on is barely above freezing.
View 6 RepliesFord Excursion :: 2001 - Parking Brake Pedal Will Not Depress
2001 Ex limited 4x2 w/50k miles-- The parking brake pedal will not depress...at all....not even a millimeter. Feels like it is "locked".
View 2 Replies