Ford Excursion :: 2001 - Vibrating Noise Between 70 - 75 Mph?
My '01 Excursion gets a vibrating noise between 70-75mph. I've located it to the 2nd row drivers side seat. Only does it when it's in the upright position. I can hit the seat and have it make it briefly. But I can't locate the cause.
View 3 RepliesFord Excursion :: 2003 V10 - Driveline Has Been Vibrating
My driveline has been vibrating for some time now. I changed out the rear u-joints with no improvement. I found the spline to be sloppy. I think I need a new driveshaft.
View 3 RepliesFord Excursion :: Vibrating Rotors - Brake Calipers Replacement
Front caliper replacements--fwd? Person I bought this from said they'd just relined the brakes before I got it. After having it a week, I randomly checked torgue on lug nuts...a whopping 80 ft lbs. So now I have the vibrating rotors. When I back up I hear scraping like a bad set of bicycle brakes against an out of round rim. The pads are pretty thick. I bought new rotors and pads but I wonder if I shouldn't get calipers as well. This X likes to bite me in the butt--something simple is always about 5 times more complicated than anticipated.
View 1 RepliesFord 6.0L Power Stroke Diesel :: 2005 Excursion Started Vibrating When Getting On The Highway
So, on my way home from checking out a house all of a sudden the truck started vibrating when getting on the highway. Then it got worse quickly. So I pulled off at the next exit and pulled into a parking lot, the truck shuddering badly any time I pressed the fuel pedal. Had it towed to my local Ford dealer. I'm thinking torque converter/transmission, but I freely admit I don't know. Here's what I think is pertinent info-
1. I bought it at 84k miles, now 122k. Oil changed every 5k, fuel filters every 10k, coolant every 20k, trans fluid every 20k. Don't kmow what was done first 84k miles before I bought it.
2. Driveshaft rebuilt one year ago. Both fr and rr diff fluids changed a few months ago, along with transfer case fluid.
3. When in park or neutral engine revs perfectly smooth. When placed in gear and fuel is added it starts to shudder, getting worse as revs go up. Does not vary with road speed, only with engine speed and load into transmission.
4. There are no codes at all. All temps were normal. Engine oil and trans fluid level normal.
5. A few months ago when coming home from a trip I suddenly had the same symptoms about 3 miles from home, but not as bad as today. Made it home taking it easy and went to bed. I was exhausted from a long day of driving and when I test drove the truck the next morning to check it out it was smooth as could be, so I thought maybe I imagined it. Symptoms did not reappear until today, a few months and several thousand miles later.
Ford Excursion :: V8 And V10 Have Same Exhaust Layout?
Found this a few weeks back and the guy still has it. He just keeps re-listing it and I keep seeing it. Since I need to slow down and just chill for a bit could I snag this and bolt it up? Might give me enough powah to make me feel like I have a 6.0 for a few weeks
MagnaFlow 3" Exhaust
Ford Excursion :: Exhaust Leak At The Manifolds
Can't put it off any longer. Cold start I am getting the exhaust leak at the manifolds on an '01 V10. It's worse on the passenger side than on the driver side. So, I know the bolts/studs fatigue and snap off causing this. With my luck probably flush in the head. So who has done these and how bad was it? If I'm going to do this I am going to swap in a set of shorty headers instead of installing gaskets.
View 14 RepliesFord Excursion :: Broken Exhaust Studs?
Broken exhaust studs and decided to get the Banks system. I haven't run across any problems with them in the old threads. Are you happy with your headers and exhaust now that it's been on a while?
View 14 RepliesFord Excursion :: Removing Exhaust Hangers?
Tip for searching for "how to remove ford exhaust hangers" - these items are now among my most hated items. Very easy to install with a little lube on the hanger, but removing them especially while they are installed on a the truck is a major PITA! Spent forever today trying to pry them off and it finally dawned on me how to remove them easily. Thought I would share.....use a pitman arm puller or similar puller. Mine fit perfectly and made removing several of these (more than once) much easier.
View 6 RepliesFord Excursion :: Exhaust Smell On Start Up
I am having an issue with exhaust coming from somewhere on top of the engine. I've been smelling it on start up for a couple of months and thought it was a rear window or door seal.
Well, with this (insert long string of expletives here) cold weather, I was having starting issues. Turns out all my battery terminals were loose-ish and a jump would get me going. Anyway, yesterday while getting a jump, once it started I noticed exhaust spouting from the top of the engine somewhere. With the engine fan and the wind, it was impossible to figure out where exactly it was coming from.
It has the stock boots on it (ordering from RR today) and the rest is in my sig. Stay warm! I did service the battery cables/terminals last night and made sure the batteries are charged. Im hoping for the best after work today.
Ford Excursion :: Lost Turbo - Smoke Out Of The Exhaust
Thinking back, this may have started Saturday.... or may be earlier. Saturday I noticed smoke out the exhaust when I would let off the throttle, like coming up to a stop sign, or getting off an off-ramp. Didn't think that much of it. Yesterday I notice its worse, so I'm looking at my Quadzilla monitor on the way home and I'm seeing ZERO psi of boost.....
Is it possible I lost my turbo and my Excursion still motored down the highway towing 7,000 lbs. with the cruise @ 65 and the truck never skipped a beat ??
Got it home so I could unload the trailer...... at this point is there any harm in running the truck to get the trailer into the back yard to get the trailer put away and get the truck in my driveway to work on it? Tried to do some reading here last night and it looks like plenty of others have lost a turbo and (apparently) not sent shrapnel into their engine.
I assume I can find a disassembly / assembly video on Youtube on removing a turbo from a 7.3. Can the Riffraff turbo rebuild be done by a guy who is mechanically inclined, but by no means a diesel mechanic ?? What other parts will I need in the process?
Ford Excursion :: Exhaust Leak On Passenger Side
We bought the X like almost year an a half or two years ago. Since the day we bought her shes had an exhaust leak on the pass side. Ive been a mechanic forever and it didn't bother me at purchase. Well I finally get around to it this last weekend. My son and I get to repairing her on saturday. Well we got manifold off with the intention of ordering a new set of headers. Well Luke talks me into just replacing the broken stud (got lucky only had 1 on the pass side). And replacing the gasket. So I took the manifold to get resurfaced,got the new studs and gaskets.
We reassy everything. It went well, start her up and wow shes finally quiet. I love it. So were sitting there admiring our work (took most the day as we had to drive 40 minutes away 1 way to get parts and angle drill alone). As were sitting there chattin for 5 minutes im like do you hear that.....Its getting louder luke WTF.....WELL IN 5 MINUTES THE DAMN LEAK IS BACK... It sounds like its back at the original place but while listing with a hose it sounds like its also at the y pipe. But the sound can be traveling......
I def am not a fan of Autozones felpro gaskets but they have worked in the past. But they look NOTHING like the factory units but still should work. Well I searched all weekend and read tons of posts on what to get. As I def want to replace the y pipe also. In the end said ok,what the hell. I just got off the phone with BANKS. I ordered headers,y pipe,gaskets,etc. I didnt want to spend that much but after pricing headers (from all manuf's and a new y pipe) the BANKS complete system wasn't much more...
Kit should be here tomorrow or wed at the latest. And I just want my X to be exhaust leak free. Im not big on taken pics during install of stuff but ill try and ill post up after it done.
Ford Excursion :: 2005 V10 Transmission Leaking / Dripping Right On The Exhaust
I have an 05 ex v10 4x4 with 3.73 gears, Was towing my camper (9000#s fully loaded) after about 100 miles pulled off highway and tranny fluid was dripping out of a grommet in the bell housing. Dripping right on the exhaust and it looked like it was on fire.
All gauges showed everything running cool. Checked fluid and couldn't see any loss. Continued to our location and it seemed to stop. Checked tranny fluid continuously and never really showed much loss. Just enough to cause smoke on pipes.. Drove home and stopped leaking. Got two miles from house and started again.
Tranny temp gauge never moved. Does seem to work because I watch it heat up and then stays at the same temp always. This was a 400 mile roundtrip here in flat Florida in the 90's.
Ford Excursion :: 7.3 Crank But Won't Start - White Smoke Comes Out Of Exhaust
My 7.3 won't start after sitting for almost 2 months, the wiring for the injectors was bad, and the first package was damaged, so I had to order a new one, and wait trough Christmas before I get the new parts. The valve cover seals have now been installed, and all parts fitted. Thieves stole my batteries so I had to buy new ones there as well.
When I tried to start it, it will crank, but not start, white smoke comes out of the exhaust, and glow plugs seem to be fine. One thing I did notice is that the fuel pump under the driver side of car was making a wired noise when turning on the ignition, it was not a constant hissing sound that I used to on my other cars. I poured a small amount of condensation remover in the tank, the tank is half full, but still no start.
After trying a few times, it did sound like it would get better, but that only lasted for a second. Strange problem, I think my fuel pump is acting up, but I don't know for sure yet. The fuel pump did work when I parked it. Could it be a fuse that does it? I checked the hpop to see if there was any oil there, and it was.
Ford - Excursion :: 2001 - Truck Would Not Stay On / White Smoke From Exhaust
After a hard rain overnight, my truck would not stay on. I had to give it gas while still in park or it would cut off. Also I noticed white smoke from the exhaust while doing that. Eventually car stayed on. But now at when I come to a stop, the car will cut off when I put my foot on the gas to take off. I also.noticed the overdrive button will start to blink. Once the car gets going a few miles, then it's fine. Then this process starts all over again once the car is parked. Also the service engine soon light came on.
View 1 RepliesFord Excursion :: 2000 V10 - Knock At The Rear Of The Engine / Exhaust Leak?
This is a 2000 EX with 146k miles on it bone stock. I have not done any of the regular maintenance on it yet or even gotten to really check this problem out. I am not driving it at this time mainly due to this problem.
The noise is heard the best at the rear of the engine and underneath the truck as the video shows. It seems to slightly change in sound (maybe a tad bit quieter) once I put it in gear (drive and reverse), I have not really heard a change in it after the truck has warmed up either. It does not sound at all really metallic to me..
[URL] ....
Ford Excursion :: Coolant Puking And Overflow Tank Smells Like Exhaust
I have owned my 2005 v10 ex since 60000 miles. Have had many dependable family road trips and love my truck.
Recently it has started puking coolant and the overflow tank smells like exhaust. The oil cap has some coolant sludge on it. But there is no coolant mixed with the oil. Or oil in the coolant.
I am pretty certain these are the signs of failing head gaskets. The truck has 193000 miles on it now.
Want to keep it on course. But keep it reliable. So do I buy new engine or do I just replace head gaskets?
Ford Excursion :: Shudder Noise Under Load Similar To Exhaust Leak
Got a shudder noise similar to an exhaust leak on my Excursion V10. I have no codes ... engine idles and revs fine.. Only hear noise when under load. Goes away when you let off the gas.
View 8 RepliesFord Excursion :: 2000 V10 - Oil Leak After Exhaust Manifold Stud Repair
2000 excursion, 4X4, V10
A few days after the job was completed I noticed that the top stud on the driver's side closest to the firewall has signs of oil leaking from inside the hole. This is a hole that I had to drill and insert an 8mm Heli-coil. I was very careful on the depth of the hole I drilled. I tried removing the bolt and placing JB Weld high temperature epoxy into the hole and reinstalled the bolt. I waited over 24 hours for the epoxy to cure and then I checked for leaks. The leak re-appeared but has slowed down quite a bit. I have a USB endoscope that I will be using to inspect the inside of the hole to see if I can see where the leak is actually coming from. I am in no position to replace the head but I will do whatever it takes to get the truck back into service.
After 7 days in my garage, I finally removed/replaced all 20 manifold studs. I had to cut off all of the nuts to remove the manifolds. I was able to remove 17 out of 20 studs by using a 6 inch pipe wrench and a lot of coaxing. 3 of the studs were already snapped off inside the head. I drilled out two and was able to get them tapped for a Heli-coil. The third stud I broke a 1/8" cobalt drill bit inside and it took 4 days to get enough of the hole drilled out to get a Heli-coil inserted.
Ford Excursion :: 2003 - Rough Idle - Puff Of White Smoke On Cold Startup - Slight Exhaust Leak
I've been chasing a problem all summer. Began with crappy batteries dying intermittently. I replaced the batteries, FICM, finally cleaned EGR valve and replaced ICP with pigtail. The problem is still persistent. Basically a rough idle, puff of whit smoke on cold startup, rough running at around 1500 rpms( driving at 50 mph). The ICP was soaked in oil so i was confident replacing it would finally cure my issues. It actually got worse with the rough idle turning to a surging idle and quite rumbly at 50 mph speed. I guess its time to look to injector issues but i thought id check if after replacing icp/ cleaning egr. I also have a slight exhaust leak at turbo out that i can see. The clamp is not seated properly. This after turbo connection to exhaust.
View 1 Replies