Ford Ranger / B-Series :: Polishing And Porting Upper Intake Manifold
So i was thinking about buying a intake manifold for my truck and porting it and polish it. Would it be worth doing. I've decided that trying to port the heads will take up to much time and money for gaskets. Now the only reason why I am buying another stock one is so i can take my time and do it right.
View 14 RepliesFord Ranger / B-Series :: 2001 4.0 SOHV Upper Intake Manifold Removal
It doesn't look anything like the illistration in my Haynes book.Where are the bolts located and how many?
View 14 RepliesFord Super Duty (1999-2016) :: F250 - Hole At The Back Of Upper Intake Manifold
1999 F-250 LD 5.4... There is a hole on the back of the upper intake manifold, just below the back of the throttle body, is a vacuum hose supposed to be attached here? Have a serious vacuum leak, no coolant loss, no overheating, just had cop's and spark plugs done, now she backfires, stalls and will not stay running, mech. says its an intake gasket but the gasket and lower intake manifold look new.
View 7 RepliesBonneville :: 1995 Pontiac GM 3.8 Upper Intake Manifold Replacement
Just today,when replacing the UIM on a naturally aspirated 95 Pontiac Bonneville 3.8 with a Dorman upgraded type from my local auto parts, I ran into an issue. When following specified torquing sequences and specs , be very careful with the 1 long stud (#7), as it will split your new manifold there if you try to torque to 89 in/lbs. Took 1st back for replacement ,and the second new one started to split at the same place. Was using a brand new Craftsman in/lb torque wrench set correctly and following instructions exactly. I've seen a lot of excellent info on this UIM issue with the GM 3.8 ltr 1995-2004 years, but never this issue with the replacement ones. If I have to change this again will definitely go with the aluminum one.
View 1 RepliesFord F-150 - 1997-2003 :: Coolant Leak On The Upper Intake?
I have a 1998 Ford f150 4.6 2x4 i have a coolant leak on the upper intake. It comes out on the back left of the intake through a metal pipe. Well where the metal pipe is (pressed in) to the intake. Now i talk to the guy at ford dealership in the parts he said it is called the (heater pipe). He also told me that the part is 21 dollars but I have to press it in and if that does stop the leak he said I would have to buy a new intake. Now here is the problem I can not find any info regarding this heater pipe. I don't know how to remove it properly, why it is leaking. I can't find it in the handbooks that i have read so far.
View 14 RepliesFord F-150 (2004-2008) :: 2006 - Coolant Leak At Intake Manifold
I have a 2006 F150 screw 4.6 auto 116k miles that has evidence of a small coolant leak where the intake manifold joins the head. This is on the drivers side directly under the thermostat housing. The t-stat housing is dry and the hoses all appear dry. It's just wet right at the gasket where the manifold joins the head. Reservoir is still normal so it's not leaking too much just yet.
I searched this site and youtube but didn't find any other posts. Lots of problems with older trucks with composite manifolds but nothing for this one. It looks like a part of the bottom of the manifold is plastic but the entire top and where it is leaking is all aluminum.
It seems odd that this would start in the winter time just driving back and forth to work (no load). And, yes the antifreeze is good. Just wondering if this is a known issue with this truck. Is it just a matter of replacing the gaskets or is there some other flaw I should be concerned about?
Ford F-150 (2009-2014) :: Coolant Leak At Y Hose For The Intake Manifold And Thermostat
If you have a coolant leak at the y hose for the intake manifold and the thermostat, make sure you replace the upper radiator hose as well as the y hose.
View 3 RepliesFord Excursion :: White Smoke For A While After Startup
I've been googling for about 3 hours now, and no answers for the gassers, just diesels. When I start my excursion (v10) it pours white smoke for a while, then stops. It does this every time I start it no matter how far I go or how long it sits.
There is plenty of coolant in it and I've never had to top it off, so I don't think it is getting coolant in the cylinder. With that much smoke it wood definitely need coolant if that's what it was. Oil consumption is kind of high in my opinion, but the smoke smells rich.
Ford - Expedition :: 1999 - Engine Started Losing Coolant / Intake Manifold Gaskets Leaking
I have a 1999 Ford Expedition. A couple of days ago The engine started losing coolant as soon as the engine cooled. I replaced the coolant only to lose it again when the engine cooled. I was told that it is more likely the intake manifold gaskets leaking. It seems they are right. What is the cost to repair if I take it to a mechanic?
View 1 RepliesFord - Escape :: 2012 - White Smoke Came From Exhaust When Starting The Car
I recently purchased used from a dealer. On two occasions recently white smoke came from the exhaust when starting the car. One time after sitting at work all day and most recent upon starting first thing in the morning. 30,000 miles and still under warranty.
View 4 RepliesGrand AM :: 2000 GA 3.4L SE (base) Sedan With Intake Manifold Coolant Leakage
I have a 2000 Pontiac Grand Am SE sedan (base model) with a 3.4L engine at 142Kmi that was just diagnosed with an intake manifold coolant leak by an independent shop.
I've done some googling and found that this is a known problem with this engine (including a class action suit). So far the leak is just external; no coolant in the oil and no oil in the coolant.
Ford 6.0L Power Stroke Diesel :: 2006 - Blowing White Smoke At Startup?
2006 blowing white smoke and sluggish until its driven for a few miles ..smells like fuel .. New head gaskets and the works started after 20 days over below freezing temps nights at 5 to -5 ....
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: White Smoke At Startup Even When Its 90 Degrees Out
I have long been having troubles with white smoke at startup, even when its 90 degrees out. Long story short I've got new glowplugs, GPR, UVCHs, valve cover gaskets, injectors, turbo, valve seals, valve springs, and HPOP all within the last year. Most of those parts were needed, some maybe not so much. After installing injectors things started getting worse, whether they're related or not I'm not sure yet. I pulled passenger side valve cover off again in an attempt to figure something out and heard this coming out of the intake spider.
[URL].....
The strange thing is it goes away when it warms up. I should also note the reason I started with the passenger side is because I did a compression test and this side had the lowest readings, with #5 being 270 psi. I disconnected each injector one at a time on the passenger side to see if it made a difference while running but didn't really notice a difference. Am I looking at a motor rebuild, or at the very least a head removal?
Ford 7.3L Power Stroke (1999-2003) :: White Smoke At Startup And Knock When It Warms Up
So my truck a stock 2000 7.3 started smoking when I would start it up in the morning... figured it was a glow plug issue. Checked the relay it was good, checked the glow plugs found 2 were bad replaced them.
Thought I was done, well I started it up and took it for a drive. still smoked... thought no big deal I know some oil leaked into the cylinders doing the glow plugs.
Then it started rattling like a lift went out, no more smoke though because the truck was warm... shut it off at my buddies. Limped it "it actually still drives ok" 5 miles home.
From my research it sounds like an injector. I have tried a buzz test and they all sound the same.
Ford 6.0L Power Stroke Diesel :: White Smoke At Startup And Driving While Cold And Warming Up
I'm in the middle of an extended coolant flush and switch over to ELC. As of recently, I have noticed white smoke at startup and driving while cold and warming up. (Even at times accelerating when half warmed up ~170*). At first I attributed it to suction, so last night I changed the oil with T6 along with a new OEM filter.
After I got done with the oil, I pulled my EGR valve when the engine was hot. Is this simply goey due to warmth, or do you suspect EGR cooler leaking? I didn't take pictures of the manifold, but the lower chamber was hard and dry, while the middle section seemed to be "goey". EGR Cooler or something else???
Ford 6.0L Power Stroke Diesel :: 2006 - Blueish White Smoke On Initial Startup
My 06 6.0 is blowing a fair amount of blueish, whitish smoke only on initial startup, then continues to blow smoke slightly for around 10 min until it's warmed up. It seems to be getting a little worse as time goes on, only on startup though. truck has no other issues otherwise, has an egr delete, and some old edge tuner. I don't think it's head gaskets, no other symptoms.
View 6 RepliesFord Excursion :: White Smoke All The Way - Coolant Level Never Dropped
Tonight we left baseball field and my 2005 excursion was white smoking all the way home. I Stopped Several Times And Checked Coolant Level And It Never dropped. I let it sit for a hour and coolant level is still at my black mark. So does this mean it's a injector? It poured down raining so I'll have to wait till morning. Will scanguage show any codes for injectors. If so I can program in the morning.
View 5 RepliesFord Excursion :: Coolant Loss And White Smoke From Tailpipe
I was having an issue with coolant loss and white smoke from tailpipe. Was told it was likely intake leak vs headgaskets. Changed intake gaskets, fixed the issue for a day then it started just dumping coolant from every available place in the exhaust system. Was draining a full collant bottle in about 2 minutes. Was also checking for exhaust in the coolant with the tube and blue liquid which it stayed blue. Had previously done a degas pressure test and it passed. The only test I hadn't performed was compression test which all the cylinders output was lowest 160 to the highest about 185. Did not perform a wet compression test as I was mainly looking for base compression and consistency.
Not sure what healthy is on these vehicles but considering they were all running pretty close I call it good. Also it idles just as smooth. Pulled intake a 2nd time and rechecked my previous work. Everything looked fine so I put it back together. Ran smoke free for about 50 miles now I'm back to smoke after it sits a bit but it clears up after a short drive. What am I missing? I will note that I had a small coolant leak from drivers side rear of engine that I noticed while it was parked in the shop. I'm assuming that would be the oil cooler? But oil is clean so it's not mixing. What other avenues on these engines can coolant make it into the exhaust? Drives perfect with no power loss.
Camry :: 2003 - White Smoke Releasing From Exhaust On Startup?
I have a 03 Camry, that has started to release white Smoke from the exhaust only on start-up for about a week now. After that I don't see anything not even if i rev up the car.. Only on start up.. WHY??
View 13 Replies