Ford Brakes/Suspension :: 1977 F250 - Brake Pedal Goes To The Floor And Sticks When Running
When depressed the break peddle is firm, when released break peddle does not return, replaced mc and booster, bleed breaks. Still having same problem.
View 1 RepliesFord Brakes/Suspension :: Will A 235/75 R15 Tire Go On 15x8 Rim
I'd read that the stock rim is 7 inches, but have not confirmed this. I am wanting to run stock tires (235/75 R15, in this case) on 15" by 8" rims that currently have 32x11.5s on them. Are the rims too wide?
View 6 RepliesFord Brakes/Suspension :: 2012 F250 - Tire Pressure Indicator Light On?
My 2012 F250 4x4 tire pressure warning message/warning light it on, I have checked all tire pressures, they seem fine, i s this a common problem and what normally has to be done to fix the issue...
View 14 RepliesFord Brakes/Suspension :: 2006 2WD - Excessive Tire Noise Coming From Right Front Mostly
I have a 06' Ranger 2WD with General Grabber tires that have about 30,000 miles on them and still show significant tread remaining.
Within the last 2 months, I have experienced excessive tire noise - like I am driving a Humvee or something. Also, when I turned right or left the tires would make even MORE noise - it seemed to be coming from the right front tire mostly. 2 weeks ago I had the tires rotated and the sound seems to have reduced while turning but I still have the howling Humvee noise while driving down the road. There is no vibration coming from the wheel, so I don't think it's a balancing issue. Could it be the bearings?
I also checked the PSI all around and one tire does have a slow leak but I try to keep to topped off.
Ford Brakes/Suspension :: 1995 F150 - Right Front Tire / Passenger Side Wheel Is Leaning In
My 95 F150 2WD. The passenger side wheel is leaning in(top) - toed in? and I am A. concerned that this is unsafe to drive it and B. What is the most likely cause and fix? I was just looking for a starting point.
View 2 RepliesFord Brakes/Suspension :: 1997 F250 - Front Tire Chains Broke And Ripped The ABS Wire
I have a 1997 F250 Light Duty with a 5.4L and 4 wheel drive, 216,000 miles. Last year one of my front tire chains broke and ripped the ABS wire. I have soldered them back together and no longer have the ABS light illuminated in the dash. However, when I apply the brakes at speeds slower than 25 mph, the ABS pulses. Over 25 mph the brakes work as they should until almost stopped and then they pulse.
View 1 RepliesFord Brakes/Suspension :: Front Left Steer Is Making A Lot Of Noise And Wearing On Tire Inside Edge
I bought a 2002 F250, 2 months ago love the truck drives great for 130000 miles, but the front left steer is making a lot of noise and wearing on the inside edge and like its skipping every couple inches so very noisy thought maybe ball joints but a buddy say tire is out of balance truck does not pull left or right and drives straight...
View 3 RepliesFord F-150 (2009-2014) :: Ring Gear Diameter Size?
What size Ring Gear Diameter I have, 9.75" or 10.5"? Probably going to a 4:10 to get some power back after lifting my truck.
Current Axle Ratio: 3:55 LS
Bolt Count: 12
Ford Brakes/Suspension :: 2010 F350 - Tire Pressure Monitor Fault Showing On Dash Info Center
I have a 2010 F350 that has been throwing the "tire pressure monitor fault” on the dashes info center. Here is where it started. I purchased new wheels, tires and sensors a few weeks ago. I put them on and they were fine on the way home because I assume that the stock ones where still being read (they were in the bed of the truck). Put the old ones in the garage and then while driving to work the next morning I got the message. I tried to reset or “learn” the new sensors that night with no luck. There are two ways to get my truck into learn mode. One uses the hazard flashers then releasing some of the tire pressure until the truck horn beeps. The other method is a series of break pumps and turning the ignition from on to off then using the TPMS tool that apparently comes with the truck.
The truck went into learn mode every time with either method but it would never recognize the new sensors. After attempting everything on the sensors I checked to see if for some reason the trucks actual monitor was in a “fault” mode. Last night I tried relearning the old stock sensors with great luck. They all were recognized… for about 10 minutes. After getting them to work I left the shop I work at and on the way home the "tire pressure monitor fault” came back again. So just in case something had been in sleep mode when I did it I pulled over and reset them once more. Again with great luck… until this morning on the way to work again it went back to fault mode even with the stock wheels still in the bed.
Ford Brakes/Suspension :: Front End Shakes At Cruising Speeds - Gear Box?
My e150 front end shakes at cruising speeds. Has brand new tires and the best balance wheels are up front. I got the van on jack stands check for play on the tie rods and ball joints it all seem to be good and tight.
The only I did notice was that the both wheels move quite a bit from side to side and the culprit is the gear box. I removed the drag link from the Pittman arm at gear box and then i was able to move the Pittman arm at the back and fourth about 1/8 to 1/4 of an inch its not a bad Pittman arm cause the movements comes from the gear box itself.
Can that back and fourth movement be adjust by simply adjusting the Allen bolt and nut on the top side of the gear box?
Ford Brakes/Suspension :: Gear Box Leaking And Getting Some Noises When Making Turns
I've noticed my Gear box in the truck seems to be leaking and been getting some noises when making turns too that i can feel in the steering wheel more than hearing it. (not like air in the system or over steering things like that).. feels more like a grinding feeling.. anyways.. ive had a couple people recommend Redhead gear boxes.. but hadn't ever heard of them till they told me about it.
So was wondering what you all think about the company and for the ones that have gotten them any major issues?? Biggest thing I keep seeing on non-factory gear boxes are mentions of sloppy steering.. they can't be adjusted.. quick failures.. etc. etc... Worried I'd be wasting money getting something not-stock than if I'd had just bought it right from ford...
Ford 7.3L Power Stroke (1999-2003) :: Tire To Tranny Ratio - 33s Normal?
What's too big? I just put 33s on my super duty, is it "too much" for the transmission?
View 7 RepliesFord Brakes/Suspension :: 1997 F150 - Converting Drum Brakes To Rear Disc Brakes?
I have a 1997 F150, 4X4. My mechanic says its time for new brakes and was curious if it would be worth possibly converting from drum brakes to disc brakes??
My mechanic has quoted me $300 to do the rear brakes, would it be worth the extra money to convert??? I really don't care for drum brakes. I have done a search on the internet and every time it brings up the issue with the parking brake.
Ford - F150 :: 1977 - Clunk Sound When Put It In Reverse Or When Shifts To A Lower Gear
I have been fixing up my 77 F150 since I got it in January and it's really starting to look nice! I love this truck, but I have noticed a clunk sound when I put it in reverse and also a same if not similar sound when I'm driving and slow down. It makes a clunk sound when it shifts to a lower gear, (automatic). Now, I was thinking it was a U joint at some point and crawled under there and started to grab them and see if there was any play in any of the spots but found no play. I checked it a few times, thinking well it could be just the point the U joint stopped and that would explain no play but after a few times of crawling under I still never found any.
View 8 RepliesFord 6.7L Power Stroke Diesel :: Optimum Gear Ratio For DRW - 3.73 Or 3.55?
I got burned with a smoker back in the mid 1980's and have been hesitant to come back. I am currently pulling my 5er and my enclosed gooseneck with a 6.2 gasser SRW. It has the 3.73 gears in it...not the best for towing.
I am thinking about ordering a new SD DRW 2wd with the 6.7 PSD.
Both my trailers are rated at 18000 GVW, what would be the best ratio to order? 3.73's?? 3.55? Fuel mileage will be what it will be with what ever ratio I go with. The truck will be mainly a puller. Not a daily driver.
Ford F-150 (2004-2008) :: Code P0731 - Improper Ratio For First Gear
I have a 06 f150 and about a month ago I purchased an edge evolution. Twice in the past 3 weeks my o/d light starts flashing and my truck beeps and it shows Trans Fault on the trucks display. When I use the edge to check the DTC it comes back as P0731. I am running the canned level 3 tune no changes and trucks completely stock other then the edge. Also both times I have been going about 10 mph down a hill without giving it any gas. Also both times of shut the truck off and let it sit for a bit to make sure I wasn't going to break something.
View 14 RepliesFord F-150 (2009-2014) :: 2010 FX2 - Rear Axle Gear Ratio?
I just purchased a used 2010 fx2 screw with 5.4 and 6-speed auto. How can I find out what rear gear ratio the truck has? do I have to contact a dealer to find this out or are their any web based sites that can decode the vin? Is the gear ratio marked on the truck anywhere?
View 2 RepliesFord F-150 (2004-2008) :: 2005 - Ascertain Gear Ratio And Presence Of T-Lok Diff?
Looking at an '05 F-150 XL this afternoon with a 5.4 and factory tow package. Is there a way to ascertain the gear ratio and the presence of a T-Lok diff without crawling under the truck? Vehicle has 100,000 miles. Anything I should check out in particular?
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Code P0732 - Transmission Gear 2 Incorrect Ratio
Was doing some errands this morning and on the way home the transmission shifted a little strangely into 2nd. I had to let off the throttle for it to shift.
Fluid levels are correct and not burnt with no residue floating with a pinkish red color. Using Schaeffer's All-Trans Supreme.
I have read all of the threads related to the P0732 and the mechanical diode issue. Does the e99 4R100 have the mechanical diode? If not, what else could it be?
I also have the P0500 VSS sensor circuit fault which an old Ford mechanic stated could be related to a bad fuel sending unit which is definitely bad on this truck.
Am planning to go out and clean the sensor on the differential. Speedometer is working properly. I have also noticed what appeared to be a small slip when in reverse a couple of times that I initially attributed to tire spin. Is any of this related? Should I be prepared to rebuild/replace the transmission?