Ford 6.0L Power Stroke Diesel :: Shift Lever Sticks In Park
A few months ago I couldn't get the shift lever out of park without trying multiple times. Then it was okay for about 5 months now it is back and worse. It is not bound up because of parking on a hill or anything like that and I press very hard on the brake pedal. It take s multiple times to get it out of park trying turning the key on and off and so on. The truck only has 86,000 miles on it and the transmission has always worked perfectly.
View 6 RepliesFord 6.0L Power Stroke Diesel :: 2006 - Replacing Batteries Repeatedly - Parasitic Draw?
I have a 2006 F250. Past two winters my batteries have died. Last yr., bought 2 new batteries and a new alternator. This winter, battries have been replaced twice. I only drive the truck maybe once a week, about 5 miles total. I live in Indiana and we have had many sub zero temps this yr. Its been in the shop all week, the mechanic states that they are finding an extremely small draw but cannot find where it is coming from. The mechanic is wondering if I am driving it enough. Any thoughts on this? Also my batteries came from auto zone, the mechanics thought it was bad that I had bought them from auto zone.....not sure if that should even be a factor....
View 14 RepliesFord 6.7L Power Stroke Diesel :: Pm-22 Go Bad With Open Can?
Will a gallon of fords pm-22 will go bad if the can has been open?
I was thinking of getting a gal can of the stuff but I'm worried it might go bad before I finish it off.
Ford 6.7L Power Stroke Diesel :: 1995 - Cannot Open Hood With Latch
I have a 1995 Ford F-250 7.3 liter Diesel. I can't open the hood with the Hood Latch. It opens to the safety latch but I can't fully unlatch the hood.
View 1 RepliesFord 6.7L Power Stroke Diesel :: Tailgate Increasingly Hard To Open
My tailgate is getting increasingly hard to open (and it's not me getting weaker!). I now have to pull pretty hard towards the left side of the handle to get it open, whereas I used to just pull in the center without much effort and it'd fly open.
View 13 RepliesFord 6.0L Power Stroke Diesel :: Code P2623 For The ICP Circuit Open
Over the past weekend I had to replace all of the egr gaskets and seals, due to it failing smog. I removed all of the harnesses over the motor, intake manifold, turbo, and oil filter housing. I also replaced the oil/oil filter and also the fuel filters. The truck ran great before I decided to replace all of the seals. When I went to start the truck, it would just crank and not fire. One thing I noticed was that my wait to start light only stays on for a few seconds, where before it would stay on for a while. After cranking on it for a while I got a code P2623 for the ICP circuit open. I have tried unplugging the ICP sensor to see if it would start, but it just cranks over. The truck sounds like it wants to fire, but wont. Should I pull the ipr and ICP sensor?
View 4 RepliesFord 6.0L Power Stroke Diesel :: Annoying Chime Sound Whenever Open Door
Annoying key chime whenever I open my door the truck starts making a annoying chiming sound. Where the chime box is??
View 5 RepliesFord 6.7L Power Stroke Diesel :: Truck Would Not Open Door Locks For Like Ten Minutes
My truck would not open door locks for like ten minutes or do anything. then all off sudden it worked again its this twice...
View 9 RepliesFord 6.7L Power Stroke Diesel :: 2013 - CEL On With P206 Code / Fault Inj 6 Open Circuit?
On a family vacation in our 2013 6.7 pulling a 41ft trailer to the Seattle area from Alberta Canada. Made it to destination yesterday. Woke up this morning started truck and cel on. Bought a code reader at the local napa store and read P206 fault inj 6 open circuit. Any thoughts on driving the truck around with a inj fault? Thought I had read here some where that 6 was the regen cylinder.
View 14 RepliesFord 6.0L Power Stroke Diesel :: CEL On For Multiple Codes - Cylinder 1 / 2 / 7 And 8 Have Glow Plug Circuit Open
Just got back from the beach yesterday. On the way back I noticed the check engine light on and read the codes. It listed 4 codes, P0671,P0672, P0677 and P0678. From what I can find, Cylinder 1, 2, 7 and 8 have the glow plug circuit open. Truck ran fine and didn't miss a beat. Ambient temp was around 80 when we started up the truck so I guess diesel plugs are not to crucial for that temp. I did notice when driving back the Vbatt would jump from 12.2v at1854 RPM (34 MPH) and 13.8v at 1652 (57 MPH).
Would bad batteries or low batteries cause this type of problem? This may be wishful thinking on my part. I have tested the batts with a DMM and they are at 12.3v. I took them out and charged them but they always go down to 12.3v. FMP is 47.5v to 48.5v. It seems suspect that all four glow plugs would be bad so I assume it could be the harness. What are some ways I can test to verify where the problems come from.First thing I would do is get two new batteries as these are still under warranty.
Ford 6.7L Power Stroke Diesel :: 2013 - Power Steps Extend When Open Driver Door - Location Of Door Switch?
So I have an issue over the last couple weeks, when I open the driver's door the power steps extend, and anywhere from 10 seconds to a minute later the step will retract like I closed the door. I didn't notice this the first time so the first step out of the truck caught me off guard. Now I pay attention to see it is extended before I get out.
So at first I thought it was a step issue, like it wasn't getting a consistent signal that the door was open, but I noticed yesterday when I had the door open, truck running, and radio on it all of a sudden retracted. I shut the truck off and got out but the radio kept playing because the truck thought the door was closed even though it was wide open. I closed the door and opened it and the radio shut off and the step extended and retracted like it should.
So last night I left the door open, truck off, no key in it. Over a period of 5 minutes, the step extended and retracted 8 times. My issue is only with the drivers door, the back doors and passenger doors don't appear to have an issue.
Where is the switch for the door? I think that would be the best place to start in replacing that.
Ford 7.3L Power Stroke (1999-2003) :: Back Doors Won't Open From Either Side
I have always been afraid this day would come - that the engine would outlast the door and window systems.
I have never previously in life wanted a vehicle with electric assisted windows and doors for this reason - remember when those were expensive foo-foo options on a vehicle?
Anyway the back passenger door window has not worked for a couple years now. Not too big a deal.
A month ago the back passenger door could no longer be opened from either side. Not too good and I couldn't see much of a way to ever fix it.
This morning the back driver side door won't open from either side. The lock only half-heartedly wants to unlock via the powered system though it can be fully pulled up manually (not as possible on the passenger side rear).
Next up will be the front doors...
Ford 7.3L Power Stroke (1999-2003) :: P1273 Code - Cylinder 3 High Low Open
So I got an IDM code and then after running AE buzz test got a P1273 (#3 cylinder high low open).
Ohm'd out the 42 Pin - got 3 across the board. Only test 42 pin from valve cover to injectors.
Double checked UVHC
Swapped solenionds
Swapped injectors
Did ford wiggle test.
Ran Injector buzz between all those steps and still get P1273.
What's the next step? Ohm from IDM to 42pin? May actually be a bad IDM?
Ford 7.3L Power Stroke (1999-2003) :: Red Door Open Light Started Staying On
So my red door open light started staying on. Along with all the lights associated with the doors being opened. The lights don't always come on, but the dash lights stays. As a quick fix I just popped the bulbs out and went on my way. Tried lubing the doors. That didn't work. I started noticing it seemed to be related to when I was slowing down or turning.
I thought maybe it's my passenger leaning on the door around the turns. So I inspected all the doors, they latch fine and don't feel like they're open. Last night I was riding by myself, and I realized that it wasn't anyone leaning on the door. When I would slow down, at the same spot. I would hear a click and the lights by the doors would come on, as well as the light on the back of the cab over the bed.
It did it every time the whole way home. It was approx. 16-18 mph when it would click. It was the same spot each time but I couldn't really nail the exact speed and watch for deer. I originally thought I'd just replace the sensors in the doors, but idk if that'll work anymore since it seems to be affected by other factors.
Ford 7.3L Power Stroke (1999-2003) :: Driver Side Back Door Won't Open
My driver side back suicide door won't open. It is the top latch that is not disengaging. I think I heard something loose in that door over the past month. Am I going to have to take off the inside panel to fix it?
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Extended Cab Driver Side Door Won't Open
I can't figure out the problem with my extended cab door. Driver's side doesn't open with either door handle.
View 13 RepliesFord 6.7L Power Stroke Diesel :: With Door Open Door Ajar Message Goes Away?
Having issues with the door switches. My driver door, when opened, will cause a quick "door ajar" message then go back to as if I closed the door. Only once have I closed the door to have the dome light stay on. Doesn't do it all the time but is more frequent with the cold weather setting in. I got the service truck next week so its a good time to bring it in for warranty work.....
View 6 RepliesFord 7.3L Power Stroke (1999-2003) :: IDM Failure Code And High Side Open Bank 1 And 2
Today I just installed a brand new IDM and after running the Injector Buzz Test test, I received codes: P1298 Injector Drive Module Failure, P1293 Injector High Side Open - Bank 1, and P1294 Injector High Side Open - Bank 2. How a new IDM could throw these codes?
When running the KOEO test I received codes P0605 Injector Control Module Read Only Memory (ROM) Error, P1298, P1293, & P1294.
My engine is still missing but the engine is running a heck of a lot better after replacing the IDM and injector 8 has a rotational velocity of about 3%
Ford 7.3L Power Stroke (1999-2003) :: Code P1271 - #1 Injector High - Low Side Open
Getting DTC Code P1271 - #1 Injector High -> Low Side Open.
The code tends to show up more during cold weather start up. Using AE-AutoEngenuity KOEO - Buzz Test returns the P1271 error
Troubleshooting performed:
- 42-Pin Connector @ Driver Side Valve Cover
- 9-pin VCH on Passenger side
- IDM Module under driver side wheel well
- All of these are testing within the 2.8 - 3.2 Ohm range
- (Used the GB Reman. Tech Bulletin 103) - TB 103: 1994-03 Ford 7.3L IDM Replacement & Diagnostics)
I was going to replace the solenoid, however, with the above readings I'm not convinced it's the solenoid. Before I tear into the valve covers I was looking for some add'l thoughts from the forum. Could it be the IDM ?....
Any add'l checks to perform using AE, or the IDM, other than replacing IDM.
01 Platinum 7.3 - BTS - PHP Hydra Tunes - 4" FloPro - Riff RaffWheel - Redhead Steering - Driven Diesel Hutch/Harpoon - Kenwood DVD w/ back up- 35"s - GloPro EGT/Pyro/Boost/Trans, Scan Gauge II, AE bundle