Corolla / Matrix 2009-13 :: 2010 Factory XM Radio Module - No Signal
We have the basic stock CD / radio model number A518A1 and the XM Radio module with the fit kit installed in the passenger side wheel well in the trunk in a 2010 Corolla S.
Installation of the XM Radio & fit kit was dead simple and we're using the built-in OEM antenna on the roof of the car.
The problem we're having is the dreaded NO SIGNAL message when trying to listen to XM Radio.
I have the Lynx portable XM Radio installed in my car and when both cars are in the driveway, I can get the signal all day long and in her car she gets the NO SIGNAL message.
We've already called XM Radio and had the signal resent to the radio numerous times with no success.
I've gone to our Toyota dealer and the only thing they can recommend is to replace the OEM roof antenna. That part alone is $80 and you have to completely disassemble the headliner to get at the antenna.
Wiring up an actual XM antenna to take the place of the OEM roof antenna? I've searched the web and can't find an adapter plug.
Corolla / Matrix 2009-13 :: Factory Usb / Aux Input On 2010 Car?
The 2011+ corollas have an option to have a usb/line in jack for the radio which is by the time clock. I have a 2010 corolla with just the line in jack aux input. Can I get the usb/line in jack part from the 2011 corolla and hook it up the wire that was originally connected to the line in jack connector? Or do I need part PT233-47100?
View 6 RepliesCorolla / Matrix 2009-13 :: Upgrade From Factory Exhaust To Catback System?
I am wanting to upgrade from my factory exhaust to a catback system. But, it seems like every system I find is borla. I have heard of and seen videos of guys putting 9th gen magnaflow kits on the 10th gen. I love the magnaflow sound but not sure how accurate the info I have found is. 2009 corolla S auto trans
View 3 RepliesCorolla / Matrix 2009-13 :: 2012 S / Footwell LED Installation?
I have a 2012 Corolla S and I'm trying to install footwell LED lights that are wired to the dome light, which wires do I need to tap in order to make this happen and how do I tap them correctly/safely?
View 2 RepliesCorolla / Matrix 2009-13 :: Viper Installation Process?
I really want to put Viper into my car, the remote start and security system. I was thinking about putting in the 5901 or 5704 in, is there a difference?
Should I get the extra accessories like the audio sensor and tilt sensor? And I'll probably need a transponder bypass module with it too?
Corolla / Matrix 2009-13 :: Remote Engine Start Installation?
Installing a remote engine start on corolla? 2013 Corolla with G key specifically.
View 13 RepliesCorolla / Matrix 2009-13 :: Acceleration Not Much Responsive After BC Coilover Installation
I just got my bc extreme drop kit installed, after taking out struts i imagined my corolla would be lighter and faster cuz the struts weigh way more than the coilovers, but when i drove it for first time after install, i noticed the acceleration is weaker and not as responsive, why this is? is it supposed to be like that, whats happening?
View 5 RepliesCorolla / Matrix 2009-13 :: 2012 - TRD Lowering Springs Installation
I have a 2012 corolla le and I'm looking into getting TRD lowering springs as I don't want to go too low and they work with the stock strut, however; I read that they work best with the XRS' shock and strut (might be just the strut but I'm not sure), my question is what are the XRS' struts called and where would I find them, also from what year would the XRS' struts fit on my le?
View 3 RepliesCorolla / Matrix 2009-13 :: 2010 Cruise Control Installation Different Than 2007 Vehicle?
I installed an aftermarket cruise (Rostra) in my manual 2007 Corolla. Other than cutting the hole for the stalk the only real difficulty was getting my fat hands up under the dash to install the clutch disconnect switch. It certainly didn't involve any wire cutting or messing around with the ECM.
It's a long story, but through a sequence of events I have to opportunity to buy a 2010 base Corolla 5 speed at a pretty good deal. It also doesn't have a cruise control. I went tot eh Rostra website just to make sure cruise units are available and I looked at the installation instructions. Unless I read the wrong sheet, their instructions make it seem like installing cruise on a 2010 involves messing with the ECM wiring harness, moving connectors and a bunch of scary stuff like that.
It seems strange to me that the older car would be "plug and play" but a newer one would need changes to the main wiring harnesses. I'm not talking about a steering wheel mounted system where the clock spring has to be replaced, just a basic cruise.
Corolla / Matrix 2009-13 :: After Installation Of Snow Tire Pressure Warning Light Won't Come On?
Had snow tires on separate rims without pressure sensors installed today. Service rep said that the tire pressure warning light will come on and stay on. However I rode car home and the warning light did not stay on after the initial engine start up. Is this a problem and a concern, or a good thing ?
View 2 RepliesCorolla / Matrix 2009-13 :: Interior LED Light Strip Installation Under Driver And Passenger Side
I am trying to install interior led light strips under my driver and passenger side. I connected to wire to my front fog lights fuse. But when I connect the negative wire to a metal part the light turns on and doesn't turn off unless i take it off. I want to make the lights turn on when i turn on the fog lights. How can I do this / what did i do wrong. I am do this in a 2009 corolla S.
View 2 RepliesCorolla / Matrix 2009-13 :: Radio Does Not Lighting Up - Screen Lit When Car Is On
I recently purchased a 2009 Corolla LE. I noticed that at night, my radio does NOT light up. However, when the car is in the 'on' or during the day, the radio screen is lit. I just know this can't be right. Is there something I can do to fix this backward problem? Or do I need to take it in?
View 3 RepliesCorolla / Matrix 2009-13 :: XM Radio Shows No Signal
Experience issues with their XM radio signal? It seems I have "no signal" more often than not.
I also have XM on my 05 Suburban and never experience a loss of signal other than going under over passes or through tunnels.
Corolla / Matrix 2009-13 :: Radio Was Not Connected To The Battery
I recently got my corolla (2009) repaired and the technician said that the radio was not connected to the battery for about two weeks. Now the radio (even the backlight) won't turn on regardless of any buttons I press. All the fuses have been checked and are fine. Could this be some anti-theft mode in which something must be done to turn it back on.
View 1 RepliesCorolla / Matrix 2009-13 :: Radio Volume Changing On Its Own - What To Do
yesterday, I was driving along a stretch of road I have driven hundreds of times. The difference this time was my radio decided to turn the volume very low then back to normal. When I heard the sound start to lower I looked at the radio & I could see the numbers for the volume level decline then go back up.
View 7 RepliesCorolla / Matrix 2009-13 :: Noise In Center Console Below The Radio?
2009-10 Toyota corolla hear a lot of noise in the center console below the radio? I know those radio bezels can be noisy along with the area underneath the radio.. The plastic there tends to creak when you go over rough tar roads or uneven bumpy roads. Especially when its hot outside..
Will this be resolved by insulating those area..? Also, when you go over a bumpy road the back of the headliner tends to make a creaking sound..
Corolla / Matrix 2009-13 :: 2011 How To Brighten Radio Display
Display is real light. How do you brighten it up. Basic toyota radio.
View 1 RepliesCorolla / Matrix 2009-13 :: Radio Keeps Blowing Fuse Under The Hood
I have a 2009 Corolla LE and the radio does not work. It keeps popping the fuse for the radio under the hood. Is this a common problem? If not any system wiring diagram? I am about to take the car on a big trip and if I cant get the radio to function....its gonna be a long ride...
View 1 RepliesCorolla / Matrix 2009-13 :: Rear Defroster / Radio Static Interference
So I have the dreaded "rear defroster/radio static interference" issue on my 2011 Corolla LE. I turn on my radio and all is good. I turn on my rear window defroster and my FM reception goes away.I am pretty sure I did it to myself because it only started happening after I cleaned the rear window with some windshield washing fluid and a paper towel. I do have a knack for being a bit gruff on things and people unintentionally so I guess I am not surprised. I must have damaged the elements of the rear defroster in the process of cleaning the window. I should have left it dirty.
Anyway, I've read many posts detailing how breaks in the rear defroster grid can introduce EMI that effects the factory radio antennae in the rear window. Some of the answers I have seen suggested are:
1) replace the rear window (really?)
2) use a repair kit. URL...
3) completely replace the the rear defroster grid with an after market kit. URL...
4) replace the factory antennae with an after market unit that is not internally mounted
5) live with it
Are there any other options that I haven't found? If the root cause is the rear defroster, the repair kit seems like the way to go (even if it looks like an annoying task to perform upside down in such tight and cramped spaces). Might fix the defroster if its broken but will it resolve the EMI problem ...