Ford Brakes/Suspension :: Replace Front Springs With Airbags
I am lowering the front end of my truck 3" using DJM Dream Beams. I have cut out the rear springs and replaced them with a four link lowering it 4" and installing an air bag suspension. I would like to run air bags up front, as well, but haven't been able to find much about that. What size to use?
View 7 RepliesCamry :: 2007 SE 3.5L V6 - How To Replace Alternator
I can't seem to figure out how to replace the alternator on my 2007 V6 Camry. Is there any sort of repair manual available? I've searched and came up empty handed.
View 10 RepliesCamry :: 2007 - Not Turning Over - Replace Battery / Alternator?
I'm having a sudden turnover issue that appears as though it's the battery, but I'm not too sure now. I left work tonight (no problem), drove to a destination about 15min away, came back out in about the same amount time....Dead!
The headlights, dash, & gauges fluttered dimly on. Weird noises was coming from the radio & A/C. I turned back the key, cut the auto headlight thing off, and the A/C and radio off. Turned the key & slowly the dash came up bright, but still didn't have enough juice to turnover. Soon there afterwards, everything else seemed better, but just not starting.
I got a jump from this guy, drove 20mins home, cut the car off, and guess what?... Dead! What's the deal? Battery, Alternator...?
- 2007 Camry
Camry :: 2007 Solara 2.4 Auto Transmission - Replace Motor Mounts?
Going to replace motor mounts. Foot on brake and placed in gear engine flexes back about 2". Doesn't seem to flex side to side or forward. Replaced dog bone the metal in the middle of the bushing had a visible crack. Still flexes. I am confused about replacing them. Should I replace all including the 2 rear mounts? This is what I have read in many posts and been told by a trans shop. Can I just replace the front and dog bone? Parts guy told me that was all that I needed to do if it wasn't flexing side to side. These things are expensive 170- ea for oems so if I don't have to replace the rear I won't. However I don't want to trash the new ones cause I didn't replace them all.
View 3 RepliesLexus LS 2007+ :: 2010 - Noises Coming From Rear And Front - Replace Suspension?
I bout a 2010 AWD LS460 in July and immediately noticed noises coming from the rear and front. The rear was a loud thud going over certain bumps and the front is making rattling noises. I lowered the windows and went down a rather bumpy block and the car sound like the bottom is falling out. I took it to the dealer and they had it for 2 and 1/2 weeks waiting on the rear air shocks to come in. They gave it back to me and did not address the front. Now the service manager is going away for two weeks and wants me to come back if I still feel the need to have the from done. The master tech stated the front left suspension needs replacing. I feel they are trying to drag this out so they dont have to pay for the repairs. The car has 80K and was bought from Bay Ridge Lexus and is not under CPO.
View 13 RepliesCamry :: 2005 Toyota - Front Brakes Frozen And Would Not Release
My wife has a 2005 toyota camry with about 84000 miles. She had been complaining of intermittent issues but no one could find the cause till yesterday. Her front brakes were froze and would not release. I took it to the shop and they said the left front was hung and the pad came off and chewed the rotor up. They suggested a brake job. Well in the process of replacing rotors and pads on the front they could not get the caliper to release. Make a long story short, the rotor and pads are changed but the front brakes will not release. They checked the lines and they look good.
View 7 RepliesCamry :: Front Right Brakes Gradually Start Locking Up When Driving
Replaced all components of front right braking system. Calipers rotor pads and hoses. Still, every other day or so the front right brakes gradually start locking up within minutes of driving.
I just bought car. I am stuck with this problem now. Only thing left i'm told is replacement of abs module.
Can you just bypass a faulty abs module instead of replacement?
Toyota - Camry - Struts :: Front Of Car A Little Wiggly / Brakes Locking Up
My husband noticed that our 2001 Camry was driving strange. He thought it was a problem with the brakes locking up. When I drove it, I felt like the front of the car was a little wiggly and thought we might need an alignment. When we took it in, they said that the brakes are okay, but that the front struts are "soft." They said that the front struts need to be replaced, which includes an alignment, and we should replace the rear struts at the same time. They said we should get new tires at the same time.
I've been trying to research it some, and we don't have a lot of the problems associated with bad struts. We haven't noticed any bouncing or anything like that. I think they are honest mechanics, but my husband doesn't trust them. We don't have enough money to get all that work done right now, so my question is, can we wait until we notice bouncing or the tires get worse to have the work done? (We would be trying to save up the money in the meantime.) Or, can we just take care of the front struts and wait on the tires and rear struts? Should we just get a second opinion? (The car does have 145,000 miles on it, and I've never had the struts replaced. I bought it with about 65,000 miles on it.)
Camry :: 2007 - Tach Sometimes Shoots Up When Tap The Brakes Going Downhill
So my sister bought a 2007 Camry last year since she was impressed with the reliability of the 3rd gen Camrys we've been driving for the last decade. It's been a good car for the last six months but she's on the verge of selling it because of sudden transmission issues on top of the oil consumption problems that seem to be commonplace with this generation of 2.4L.
She says that her tach sometimes shoots up to about 3200 RPM when she taps the brakes going downhill and occasionally it feels like she's hitting pools of water on the highway. She also described hesitation followed by an extremely hard shift when braking more suddenly, such as avoiding people turning in front of her.
Camry :: 2009 Toyota - Front Brakes Clunking / Knocking After Replacement
I changed the front brake rotors & pads on my wife's 2009 Toyota Camry & everything seems fine except when doing sudden or slightly hard stops it seems to do a clunk/knock type sound from the front brakes. It also only does it sometimes not every hard/sudden stop.
One thing that comes to mind is that when I went to tighten one of the guide pin bolts it was a real pain, the big bolt that the screw threads into kept spinning making it hard to tighten the bolt into & none of the others did this. I thought I tightened it down but possibly not?
Santa Fe (CM - 2007-12) :: Brakes Started Squealing - Front Pads Replacement?
A week ago my brakes started squealing badly. This past weekend I pulled off the offending tire to take a look and sure enough the squeeler is riding on the rotor so it looks like I need to replace the brakes at 53,000km.
The rotors look good so I plan to only replace the front pads. While I am working on it, I am going to disassemble and preform the TSB on the rears as they have been neglected lately.
What pad material should I go for, metallic or ceramic? Ideally I would like something that has good performance, yet had a good life span. I occasionally pull a 2500lbs (dry weight) braked tent trailer, but that is not very often.
Mitsubishi - Galant :: 2007 - Loud Grinding Noise From Front Brakes
Driving in snow, braking in this car routinely handles poorly and brakes make a loud grinding sound. It sounds like the front brakes. I just had a brake job from a trusted dealer. I read the thread here on the Honda Accord that reported the same sort of brake problem. The issue is the brakes, NOT tires as that thread suggests. Braking strength is greatly impaired under these conditions. I am very apprehensive about driving in snow, and ready to trade in what is otherwise a fine car.
View 7 RepliesToyota - Prius :: 2007 - Front Brakes Sort Of Grinding And Rear Grabbing
I have a 2007 Prius with 130,000 miles on it. I plan to trade in about a year, maybe a little less. I have noticed my brakes grabbing. My mechanic says that the front brakes are sort of grinding and the rear brakes are grabbing. Both are worn, the rear brakes to about 30%, front brakes to 60%. They also say they will probably last out the year. Should I put new brakes on to be safe and to be able to sell the car with new brakes, or should I just wait it out and trade it in with worn brakes?
View 6 RepliesCamry :: 2007 SE - Oil Light Flashes When Make A Sharp Turn Or Hit On The Brakes Hard
Just to start off im new to the camry family.I have a 2007 camry se. Well the the problem I am having is when i make a sharp turn or hit on the brakes hard my oil light flashes. Didn't know if this is a big problem or something small. the light flashes and goes rite back off.
View 14 RepliesSanta Fe (CM - 2007-12) :: Loud Click Noise Coming From Front End Of Vehicle When Apply Brakes
I get this loud click noise coming from the front end of my vehicle when I apply the brakes. It seems to happen much more often than not, especially at low speeds. I can only describe it as some sort of loud clicky clanky sound, it's also a single sound, it doesn't go on and on and it only happens when I apply the brakes.
View 2 RepliesFord Super Duty (1999-2016) :: 2007 F350 XLT - Front Brakes Not Working
I have a 2007 F350 XLT, Super Cab, chassis cab, V-10, 4x4. I ordered it new, it now has 97,000 miles. It is equipped with a 9' aluminum flatbed. I tow it behind my motorhome and also carry a truck camper (not when towing it!).
I don't think the front brakes are working 100%. I have 2 sets of wheels and tires (19.5s for hauling the camper). Every time I change over, I check the brake pads for wear. Over the first 80,000 miles there was very little wear on the rear pads. In 2014 I had almost a complete brake failure while traveling. I took it to a Ford dealer, and they determined the brake booster was bad. They replaced the booster and flushed the brake system. I didn't think the brakes felt right afterward, but I carried on. By 95,000 miles, the rear brakes were worn out. I feel like the rear brakes are doing most of the stopping now, thus wearing out much faster than they were.
I just ordered a set of service manuals for the truck (9.5 years late on that!) hoping to figure out something. I like the truck, it meets my needs, and I hope to keep it quite a while longer. I took it in to the local dealer to replace a leaking rear pinion seal. They found and replaced the worn pads. I trust them to the extent that the pads were worn, as I had already noticed an acceleration in wear. Local dealer that replaced the pads has no idea what could be up. They did clean and lube the front calipers at the same time, but I noticed no difference in brake feel. Stopping power is definitely worse than before the brake failure/ booster replacement.
What might cause this? The only things that come to my mind is a problem with the proportioning valve or maybe the master cylinder. I don't know much about the details of the ABS system. Is there anyway that might be causing the issue? I would rather not just start throwing parts at the problem...
Pontiac - Grandprix :: Rear Brakes Noisy - Pad Down To Metal - Replace Both Rotors?
i wrench on kids car. have done all 4 brakes in last 5 yrs. kid said front brakes were noisy. 06/01. 1 pad was worn thru to backing plate. messed up rotor. i decided to replace both rotors since cost was minimal. piston in caliper was stiff. decided to change caliper 1 week later. yesterday kid said rear brakes were noisy. rear discs. 1 pad was down to metal. replaced pads. rotor looks rough. other rotor is ok. need to get 1 new rotor. should i change both? pistons in calipers pushed in easy. feel smooth. caliper pins look fine.
View 11 RepliesCamry :: Will 2007 SE Front / Rear And Side Lip Package Fit On XLE
I have 2007 Camry XLE 3.5L V6 and i want to put the SE front and rear lip and side skirts on the XLE...is this possible?
View 7 RepliesCamry :: Front Wheel Bearing Hub Replacement On 2007 SE
Just had an oil change and during inspection they noticed that the drivers side wheel bearing is starting to go. They brought me back in the shop and I was able to feel the play in the bearing myself. Only a matter of time before it needs to be replaced.
How to replace the front wheel bearing/hub assembly? I don't have a press for the bearing itself so I'm assuming I can just replace the entire hub assembly. I have already replaced the drivers side rear hub assembly about 1.5 years back due to a bad bearing