Prius (2004-09) :: Corrosion On Steering Knuckle Where Wheel Bearing Hub Assembly Seated
I have removed knuckle assembly and pressed out bearing hub assembly, I have the new bearing hub assembly..... I live in Iowa so there is corrosion on the knuckle assembly - I have removed enough that the new bearing assembly will go in....
My question/concern : With the corrosion removed the surface of the knuckle where the bearing will seat is not uniform all the way around. The bearing hub assembly will go in and will require pressure to do so but will the bearing last? I can buy a steering knuckle but do not want to if I don't have to.
Lexus GX 2004-09 :: GX470 - Seat Belt Assembly Malfunction On Driver Side
Need to replace Seatbelt assembly on a 2004 GX 470 driver's side?
Mine reads sometimes, but other times I get the airbag warning light, so I need to replace it.
Toyota - Corolla :: 2015 - Rust Underneath Back Seat
I purchased a new 2015 Toyota Corolla this last June. While installing car seat covers this weekend, I lifted up the backseat and saw a good deal of rust on the hinges and bar that's bolted to the floor. The bolts are shiny and look new. I'm waiting for a call back from the dealership, but wanted to know if this is normal.
View 19 RepliesFord Excursion :: 2003 - Middle Row Driver Side Seat Belt Latch Assembly
2003 Ex, EB, bench style middle row. I have owned less than a year.
Purchased with a broken latch assembly the drivers side middle row...promptly replaced for $70. Today, it is broke again, less than a year. I am going to do some more investigating as to HOW this happened TWICE.
Chipped, broken housing on their middle latch assembly? It breaks the black part first, which holds the guts in alignment....once the black part slips down or up to far...the guts do not function.
Prius (2004-09) :: Found Corrosion / Acid On The Copper Contacts Of Battery
I've got the hybrid battery out of the car and there is a decent amount of corrosion/acid on the copper contacts. I read that after cleaning them off with white vinegar and soaking in a baking soda/warm water mix... They spray some type of anti-corrosion spray on them.
View 7 RepliesCamry :: 2004 - How To Remove Back Seat
Have a Camry sleep 04 since new. Seems like my daughter spilled something on the back seat and got under the seat...smell like hell! How do I remove the back seat? Tried pulling it up but won't come up or anything. Can't see any screws...they are leather seats, afraid of pulling it harder and breaking something.
View 4 RepliesCamry :: 2004 - Electric Seat Controls Not Working?
OK, so I bought a new Camry (2004) and realized after the fact that the lumbar was all the way forward and not working.
So, like an idiot, I pooped the switch/button off, and tried to make a jumper to see if that would get the motor going.
Well, it sparked and now none of my electric seat controls work.
I have looked at every fuse in both of the fuse boxes and none of them are blown.
Have I just fried my entire electric seat?
Camry :: 2007 / Headlight Assembly Replacement?
I'm trying to replace my dads 2007 Camry XLE japan built headlight assembly because his are insanely oxidized. Besides OEM's and CAPA's, what else are there? Any good aftermarket headlight assembly and achieve great results?
View 8 RepliesCamry 2012+ :: How To Remove Map Light Assembly
I have a 2016 Camry SE.
How do I pull out the map light assembly? The whole thing not just the bulb covers.
I tried pulling from the rear but it won't budge and created a crease in my headliner.
Is there a certain way to pull it down? I don't want to damage the headliner anymore since it's not even a week old yet.
Camry :: 2009 CE Driver Seat Replacement With Power Seat?
I would like to know if its possible to replace the regular driver seat with power seat in my 09 camry. I do see some cables lying in the bottom?
View 2 RepliesCamry :: Strut And Spring Assembly Replacement On 2007 LE
Looking to replace my strut and spring assembly on my 2007 Camry LE with 130,000 miles. What is the best China units out there. The list is many Prime Choice, Detriot Axle, Unity, FCS, AST, Sensen, ect.... Maybe they all are made at the same factory. FYI Monroe and Gabriel could be made in China. KYB complete units are assembled in USA, I called them up.
View 13 RepliesCamry 2012+ :: Front Map Light Assembly Removal
How to remove the front map light assembly. I was trying to replace my map light with LED and one of the holder came off from the assembly. Is there anyway to secure it without removing assemble?
View 1 RepliesCamry 2012+ :: Driver Side Doorsill Have Some Rust / How To Fix
Wash the car today, unfortunately found the driver side doorsill start to have some rust, and luckily the rust only found at he driver side doorsill rest doorsill looks fine.
Don't know what to do now, get it painted? or just grease it will keep rust from spreading?
Camry 2012+ :: Rust Proofing The Rear Wheel Well?
Rust proofing the rear wheel well: I was trying to rust proof/coat the rear wheel well and surrounding area to make sure i get the bolts under it. Back of the car is where most of the salt sits as the undercurrents with wind tend to drive the salt deep in the quarter panels and around tank area. I wanted to confirm if these cars still have the wheel well bolt securing the bumper to the quarter panel with a rust prone steel bolt.
When weather gets better i'll take to get sprayed somewhere. But for now i wanted to leave something on it of a coat after a good cleaning. Hate dam salt or whatever they are using these days.
I also noticed that the SE's wheel well internal sheathing was much stronger looking, solid than what's on my LE - a felt type material. Besides the wheel well rim on SE has a band of silicone type substance overlaid on it. Right?
Camry 2012+ :: Rust On Both Front Axles - Is This Normal
I have 4cyl XLE (23months 25000miles) I found this long time back but never get chance to take proper pics....
On my front axles there is lots of rust, I was wondering is this normal....or is this can be cover under corrosion factory warranty....
Just found one more old news on NY times.. Hyundai Recalls 259,000 Vehicles for Corrosion and Axle Problems....
Camry :: 2007 LE - Fuse For Overhead Map Lights / Sunglasses Assembly
I can't find the fuse for the overhead map reading lights. Which fuse is it and what is the rating?
I've found a bunch of videos on disassembling the light portion of the fixture but how can I take the entire fixture out? I'd like to tap into the power that's going to it.
Camry :: 2008 - Tiny Rust Dots On Passenger Side
My 08 Camry CE/Base on the passenger side has tiny rust dots that appeared after I got a car wash. How to remove them? I read something about clay but I don't know what they're talking about.
View 6 RepliesCamry :: 2011 - Steering Assembly Clunking When Driving Slowly And Turning Over A Dip Or Bump
When I'm driving slowly and turning over a dip or bump, like driving out of a driveway while turning, I always hear something in my steering assembly clunking. Is it something I can tighten up, like a bushing? I know it's not the usual the abs system clunk, and it's a different sound from the echo inside the tires one may hear at low speeds.
View 1 RepliesCamry 2012+ :: Clicking Sound When Turning - Front Drive Shaft Assembly Replaced?
On my 2012 Camry XLE with 22,500 miles, just had the drivers side drive shaft assembly replaced, under warranty. Was getting a clicking sound when turning. Not too happy, car comes off warranty in September. They also updated computer on a recall for the torque shutter.
Then he tells me I need an oil change (was just done, oil shiny clean). He said oil looked dirty. Also said I needed a fuel injection cleaning (at 22.5k?), and new tires. OEM tires are garbage. Wheres the Toyota quality and integrity?