Ford Super Duty (1999-2016) :: 2003 F250 - Rear Axle Steel Brake Line Size?
I made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???
View 3 RepliesLexus RX 2004-09 :: Will Tire Size Mismatch Front To Back Damage Transmission
I just had new tires put on my rx330 and had an unbelievable combination of errors occur. The tire store put on 215/65 r17 tires on the front and 235/65 r17 tires on the rear. I know this sounds impossible but that's what happened. So I ended up with a substantial mismatch in tire sizes front to back.
Unfortunately I didn't discover this until 2 weeks later after driving around 225 miles half of which was high speed highway driving. Before the tires were changed the car ran straight without any pull to either side. Now it pulls to the right.
The tire store has offered to replace the tires with the correct ones and to compensate me for any damage to the transfer case, viscous coupling unit or transmission.
So how do I determine what level of damage occurred if any? Would all the damage be evident already simply driving the car. Alternatively, would the damage be a reduction in the operational lifespan of the drive train leading up to a "surprise" future failure?
The tire store has asked for an estimate of the repair costs which will be evaluated by an appraiser.
I don't want to identify the tire store until after a final settlement has been reached. However, it is a popular nation wide tire retailer.
Ford Excursion :: 2001 - Will Different Tire Tread Depth Hurt Rear Axle?
Proud new owner of a 2001 Excursion with 7.3. The gentleman I bought the X from had four Michelin LTX M/S2's. 285/75/R16. Looks like they had plenty of tread left so I was happy, until I got home and noticed a large slice in the side wall of the right rear.( approx 2" long and 1/4"deep.). I will be towing a 8000 lb trailer with three kids. Went to big tire store and they replaced one tire. They said it would be fine with different depth. (Exact same tire). When I got home I looked at tread, has noticeable difference in depth. Looks like 3.5MM diff from what I measured. My question is this, will this be ok or will this possible damage the rear end having slightly diff overall size?
View 5 RepliesFord - Focus :: 2012 - Grinding Sound By Left Front Tire / Axle
I have a 2012 Ford Focus which infrequently makes an odd grinding, scratching sound by the front LEFT tire/ axle. It only does it when turning to the RIGHT. It usually does it as I'm coming out of the turn, not into the turn; so when the tire is moving back into the straight position. It's just the sound, you can very slightly feel it when it happens but really no stability or other steering issues. What is causing this sound?
View 3 RepliesFord 7.3L Power Stroke (1999-2003) :: 2000 - Stock Tire Size - Way To Adjust PCM To Accommodate Different Tire Sizes?
1. What is the "stock" tire size for a 2000 F350 7.3 Super Duty 4x4 SRW?
2. Is there a way to adjust PCM to accommodate different tire sizes?
Ford Excursion :: Clicking Noise Coming From Front Right Side Tire - Excessive Play In Axle
I have had a Clicking noise on my 2000 x 4x4 since 6 months coming from the front right side tire noticeable over rough roads or over bumps and I went on a journey starting with ford dealer to almost all well recognized service centers and every body says your front suspension is ok and no one seems to know where it is coming from. I thought it was my hub bearing since it fails almost every year but when I was changing the bearing, I noticed a big Excessive play in axle.
See video : My AXLE Shaft - YouTube
Also I noticed oil mixed with grease the grease is prawny with a reddish sort of color or that is some thing else.
See photos ....
Any way after replacing the hub Bearing with a used one and butting every thing together I went on a test drive. Noticed that the vehicle drive line is not right the car seems to wonder and the noise still there so i didn't get far i came right back and park my x then a funny burned oil smell was present.
Is it some thing i did wrong or is it bad situation gone worst ?
Items Checked Or Replaced In The Last 4 Months ( trying to fix)
Tie Rods. Ok
ball joints. Ok
suspension front and rear. Ok
Front stabilizer bar. Ok
control arm bushings. Ok
stabilizer bar bushings Ok
steering linkage. Ok
brake pads. A new front set installed
Rotors . Both front changed with oem parts
body mounts + sub-frame mounts. Some replaced
shock absorbers . New 4 set installed
- Rear Monroe 911176 Reflex Light Truck Shock Absorber
- Front Monroe 911175 Reflex Light Truck Shock Absorber
tires. Replaced with a new set off four
Hub Bearing. Second hand (that's when I saw it)
Spare Parts waiting list (Ordered):-
O ring ord part # 4C3Z-1K106-AA
(knuckle seal) (F81Z-3254-CB).
and some other dust seals which i can't recall.
I am looking for how to fix axle play and get red of the noise. (this is a video from you tube for clearance)....
F250 wheel bearing, is this bad or not? - YouTube
Ford - Focus :: 2006 - Size Of Rear Drum Brake Bleeder Valve?
I replaced a brake cylinder on my 2006 Focus rear drum brake. Now, I need to bleed the brake fluid, but I can't find a wrench to fit the nut.10mm is too small and 11mm is too big. What's going on? Could it be the rusted nut has grown in size enough to make the 10mm wrench too small? Or, is the nut standard?I know the drum bleeder nut I know the front disc brake bleeder brake is 10mm. So, I am thinking the rear should be metric, but since it's drum, I am not so sure. What the size is?
View 13 RepliesPontiac - Bonneville :: 1987 - Socket Size To Remove The Drive Axle Hub Bolts?
What size socket I need to remove the driveaxle hub bolts from this car? I can see the bolts are considerably larger than the socket I have for my Ford Tauruses, and I would like to eliminate the guess work before I go to carquest to get the proper socket. Unfortunately bringing the car to the store and trying sockets until I get one that fits is not an option, since the car is not running right now.
View 3 RepliesLexus GX 2010+ :: Rust On Rear Axle And In Front Suspension Arms
Ive seen this also on some 4runners. Ive had several vehicles many years old with no rust underneath at all and I check today and sure enough, some rust on the rear axle and in front suspension arms. I checked the lexus warranty and it is unclear whether this is covered.
View 14 RepliesAccent MC (2006-11) :: Tire Valves Window Broke
Have 2010 Accent. Like it. BUT tire valves awkward to reach, so I put extensions to use tire gage and air pump more conveniently. When I went to take metal cover off, the whole valve broke in my hand. Cost $100.00 because sensor had to be replaced as well. Dealer would not cover cost because I had used aftermarket equipment instead of OE plastic valve cover and metal cover had corroded in place. E-mailed factory rep, got same answer.
Also, when reaching across passenger seat to wind down window, crank came off in my hand. Shoved it back on, but just recently noticed there is a bezel in door tray where it landed. Can't for life of me see where it should go.
Prius (2010-12) Fuel :: Calculating MPG When Tire Size Changes?
How the Prius calculates mpg based on miles driven then I need to create a formula that allows us to determine mpg when you change tire size.
We know the GenIII speedo reads between 1-2mph too fast but the ECU will continue to read exactly 2mph too fast despite tire size changes as verified by Scangauge and Torque app. So what is your mpg based on? Readings from the odometer, speedometer or something else?
If you change tire size then your miles driven is going to be altered. It's either going to be more accurate or less accurate depending on how this information is derived. If the miles driven is altered then so will be your mpg reading.
Golf V R32 :: Changing Tire Size / Re-calibrating The Odometer?
I am at the point where I am going to change my tires on my wheels. Currently running BBS RC's which are 8x17 ET32 with tires 225/45/17.
For those who are running wheels with such specs or more "exagerated" have you had your odometer recalibrated to respect the new rolling diameter change or not? If yes what was your easiest solution. I know depending on wheel/tire sizes, various factors can be affected including speed indication.
From all the websites I have seen and asked, I am told that I can go as less a 215 wide but not lower than 45 in "thickness" (if I stay in 17).
My objective is to of course remove rubbing during load and go a bit lower and therefore do not know if 215/45/17 will be enough of a change from 225/45/17.
Ford F-150 (2004-2008) :: 2007 XLT - Max Tire Size On 2wd
Thinking about buying 2007 XLT Supercab 2wd with 235/70R17 stock tires and wheels. Have no plans at this time for a lift.
What would be the largest tire size replacement i could use in an all terrain tire? (thinking about BFG or Bridgestone Revo)...
Accent MC (2006-11) :: 2008 SE - Broken Tire Pressure Monitor
Had new tires put on yesterday and today my TPMS light came on. I guess one of the sensors came loose as I can hear it rattling around in the LR tire.
My question is do I have to replace all four sensors or can I just replace the one?
08 Accent SE.
Camry :: 2007 - Tire Size To Reduce Highway Damage?
I'm wanting to put a set of 20's on my 2007 camry but I don't know what size tire I should buy.
I want the as much side wall as possible.
Im scared of highway damage cause doesn't have the best roads.
I have 235/65/16s on now and its on the verge of rubbing.
Prius (2004-09) :: Larger Tire Size Causing Instability?
Is it true that a going from the OEM tire on the genII prius to larger 195/60/15 can cause or increase instability issues. I would think the point is to have wider tires to improve the stability...
View 10 RepliesTires - Hyundai - Sonata :: Changing Tire / Wheel Size
I have a Hyundai Sonata w/ P215/55R17 tires.
I am almost due to get new tires and my husband says that we should switch the wheels and get regular tires, not the lower profile tires that were OEM w/ the vehicle. The current tires are expensive and regular tires would be less expensive in the long run. When I asked at the dealership 6 mos ago they said that it would not be good for the car and would adversely affect the performance. If I do change, what tire size (regular sidewall height) would be appropriate (and less expensive)to change to?
Hyundai - Sonata :: 2011 - Same Tire Size But Different Speed Rating?
I have a 2011 Hyundai Sonata GLS with 65k miles...it has a 2.4 liter motor (4 CYL), auto transmission. The car currently has 205-65-R16 tires on it with a 95H speed rating. They all have worn down to the wear bars so it's time for replacement.
On my previous cars, I've always had Uniroyal Tiger Paw touring tires because I love how they ride. I found the same tire size for my Sonata. However it has a different speed rating...95T.
The only difference is the letter "T".
EDIT: It currently has Nexen N5000 tires and I bought the car with these tires already on....crappy tires...worn down in only 30k miles.
Lexus GS 2006-11 :: Left Front Axle Boot Is Torn Wide Open
I have an 06 gs300 awd. My left front axle boot is torn wide open. I've called multiple parts stores, looked online. And I can't seem to find one anywhere but the dealer. I have found one for gs350. So my question is will that one work in my gs300? What is the part number from the dealer is different between 06 and 07?
View 5 Replies