Accent MC (2006-11) :: Chirping / Grinding Noise In 3rd - 5th Gear And Only For First 15mins Of Driving
2007 Manual - I am getting a chirping noise/grinding noise. It happens in 3rd-5th gear and only for the first 15mins of driving. Stops making the noise after that. It happens sometimes when releasing the clutch pedal. Sometimes it occurs while accelerating and not touching clutch pedal at all. That mostly happens in 5th gear around 60mph. Thinking it has to do with trans, possibly throw out bearing. Not sure though.
View 13 RepliesAccent LC (2000-05) :: 2001 - Died At Stop Light / Grinding Noise
2001 1.5 Accent. It has not been starting consistently for the last few weeks. Ive had to use the jump box on it a few times and that worked.
The other day (cold day!) it died at the stoplight after driving for about 20 mins. It made a grinding crunch sound from under the hood as it died. After several attempts on jump box it fired up and ran again for about 15 seconds and died and made sound again.
This repeated itself a few times before I got it towed home.
I removed alternator and it tested good (PASS) at two parts stores...testing 3 times each.
Battery has about 14 volts at the posts without having charged it after event.
What would cause the car to die and make the awful sound? And why would it appear to need a jump start?
I was thinking alternator but.....
Accent LC (2000-05) :: Grinding Noise Coming From Driver Side - CV Or Bearing?
Noise sounds like its coming from driver's side. It's not terrible until you hit 30-40km/h, after that its quite loud. No whistling sounds, which i was told to listen for if it were a wheel bearing (although I ma not convinced is the only sound a warn bearing makes).
The sound sometimes goes away when I am on a bend turning left (taking the weight off the drivers side wheel).
Accent LC (2000-05) :: Pulsating Grinding / Whining Noise Coming From Engine
So I had all of my belts changed including timing belt and tensioner pulley as well as an oil change. After, I noticed a weird pulsating grinding/wining noise coming from the engine bay. It only can be heard once the car is warmed up. (It is much louder in real life.).
Car Noise - YouTube
Accent LC (2000-05) :: Grinding / Squealing Noise When Braking After First Start In Morning
Recently I've noticed more that when we first start the hyundai in the morning or after sitting a while and we use the brakes it grinds/ squeals a little and then doesn't after about 2 or 3 miles. Is this something to get checked out or should I spray something on my brakes to lubricate?
My next step that I though of was to get a simple automatic car wash cause it's been a bad winter in Rhode Island and the street shave been flooded with rock salt. I figure that might cause some friction under the pads.
Accent LC (2000-05) :: Light Grinding Noise When Let The Clutch Out / Pedal Super Hard
Yesterday I was driving home and my clutch started acting up. To start I was unable to press the pedal. The pedal was super hard, then let up but didn't feel right.
I removed the slave and the pedal went down fine. Both the master and the slave have no leaking and fluid levels are good. I haven't been able to have a buddy look at the levels when I press the clutch, but....
Here is a little more, the car shifts fine with the car off, it goes into all the gears, but with the car on it will not shift into gear. Also there is a light grinding noise when I let the clutch out..
I ordered a clutch kit already, but don't want to pull the trans if I don't have to, I would love to hear the issue is with the master or slave.....
2005 Hyundai accent with 138,000 miles
Accent LC (2000-05) :: Brake System - Front Right Wheel Started To Make Grinding Noise
I own a 2005 Hyundai Accent 1.3 SOHC and a while ago the front right wheel started to make a grinding noise, problem was related to the brake system..
So far I've tried replacing the rotor (disc), repaired the caliper (using a rebuild kit), replaced hoses (both), and event the master cylinder.... and the problem persists, it actually came to the point that after driving a while the front wheels will get stuck.
I've followed all the directions from the service manual and it still got the problem...
Ford - Focus :: 2000 - Grinding / Popping Noise When Driving - Stops When Touch The Brakes
My car makes a grinding/popping noise when driving that worsens when I go over bumps and that completely stops if I even touch the brakes. When I accelerate, the noise speeds up as well. I took it to a mechanic about three months ago and he said it was a loose bumper and that he secured it. After leaving, the noise got louder and happened more often. Sometimes the noise doesn't happen, while other times it does. My dad changed my front brake pads about a month ago so it can't be those. Is it possible that it is still my bumper making the noise? If so, I don't understand why it would stop when I brake.
View 1 RepliesAccent LC (2000-05) :: Decrease Noise In Cabin While Driving?
Any way to make my Accent quieter whilst driving. It is not overly noisy in any way, but it is certainly louder than most cars in the cabin. Is there any sort of solution to this?
View 1 RepliesAccent LC (2000-05) :: Ticking Noise While Driving Then Shut Off - Timing Belt Snapped
I bought a 02 accent base model hb 5 speed 109k miles for a winter car (have a mustang in garage.) It ran good until tonight when the timing belt snapped. I know this because while driving it made some ticking noises and then shut off and when you try to start it the noise that comes indicates no compression so the belt must've snapped and bent the valves.
View 3 RepliesAccent LC (2000-05) :: 2003 - Grinding When Shift From 1st To 2nd Gear
Why my car is grinding gear when I shift from 1st to 2nd, & yes the clutch is fully depleted and still grinds when I shift.
View 4 RepliesAccent LC (2000-05) :: 2 Different Sounds (Whine And Grinding) From Engine / Gearbox
I have a 2003 my04 accent, 1.6l, manual. I have 2 different noises coming from the engine bay. Iv'e got a video of one of them, you'll have to listen through headphones though to hear it properly, I'll post below. The noise will be echoed off the car shelter so bear with me. It sounds like a whine. You can hear it when I start revving it just after half way, and it is constant even when I am driving, becomes more noticeable as the RPM's climb.
The second noise I'm pretty sure is coming from the gearbox or surrounding areas. And it sounds like something grinding. It only happens if the car is straining I.e going up a hill in to high a gear. Or after I change gears and it sounds just before 2000RPM and fades out after 2200RPM . What could this be?
Accent LC (2000-05) :: Repeated Click Or Grinding Sound When Turning
This started a few months ago. At first it only happened when making a hard right turn, its a repeated click or grinding noise. Over time it has gotten worse, and now happens when turning either direction, and its worse the faster the car is going. Turing into the parking space at our apartment is fine... turning from one street to another going to work is not. Various things I looked up suggested the cv joint, but when I went to parts stores websites to look up prices all it gave me was cv boot kits in the results. Is this whats actually wrong, and is it something easily fixed for a DIY person?
View 7 RepliesAccent LC (2000-05) :: 2002 - Gear Grinding And Leaking Slave Cylinder
When changing gears my accent grinds as if its not engaging properly? I checked my slave cylinder and the rubber was filled with silver looking fluid could me replacing the S/C fix the issue? I don't think its synchro issue i tried double clutching and still no difference. the grind sounds the exact same as it does when you accidentally release your clutch when changing gears and it hasn't engaged properly. I also changed my manual gear box oil.
View 2 RepliesAccent RB (2012+) :: Grinding Noise During Every Slow Brake
I have a 2012 Hyundai ACCENT 4 door 45K miles. There is grinding noise that I hear when I do a slow brake. At first This grinding noise use to only happen in the morning the first couple of years, it would go away within minutes or less. Now, the grinding noise is almost during every slow brake at a red light etc. It's a grinding horrible noise that seems to be getting worse.
View 2 RepliesAccent MC (2006-11) :: Grinding Noise / Gas Pedal Vibrating
Occasionally the car will make load grinding noise that sounds like a garbage disposal:
[URL] ....
[URL] ....
When this happens the gas pedal is also vibrating. It will go away when the car is stopped and may not return for a few days.
It's 2008 accent SE with a performance chip.
Ford Excursion :: 2000 - Grinding Sound While Driving On Highway And Reaching 80 MPH
I have a 2000 excursion 6.8l v10 4x4. While driving on the highway and reaching 80mph, the suv starts making this grinding sound like it's trying to get into gear. The SUV starts to shake. when i drive at a lower speed it goes away. it doesn't make the grinding sound while driving on back roads. What could it be?
View 5 RepliesAccent MC (2006-11) :: Rear Brake Making Grinding Noise When Applied
My right rear brake is making a grinding noise when the brakes are applied. I took the drum off a couple weeks ago and the shoes are just a bit worn. Just getting into the numbers printed on the side of the shoe material.
I could not see any thing that would be making the metal on metal sound. Are there any wear indicators on the OEM shoes?
Accent LC (2000-05) :: GL Dies While Driving Then Will Not Restart
I am having with my 2000 Accent GL. It keeps dying while I'm driving it then will not restart. After sitting for awhile it will start but then after a short time dies again. The first thing I did was replace the fuel filter but that did not work. Did a diagnostic scan and it threw a code for the CPS sensor. Replaced THAT and it STILL did not fix it. I reset the computer but it didn't work. The scanner didn't pick up any other codes. Next I checked the relays and they all seem to be fine. Finally, I replaced the fuel filter but the problem did not go away.
View 3 Replies