Impala - Chevrolet :: 2006 - Intermittent No Start / Bad Ignition Switch
I have a 2006 chevy impala LT 3.9 v6. Intermittently it wont start, crank it and it does nothing. All accessories work fine. Had a new starter installed, switched the relay it works on, had the ignition switch changed (twice), had the passlock system replaced, new keys for the ignition. Had the car to the dealer four, times. It doesn't happen all the time so it cant be reproduced at will. I just keep trying to start it and it will eventually start, it can be turning the key from 4 to 40 times. there's no rhyme or reason, some times it doesn't happen for 5 days, then it happens everyday for a week.. according to the dealer when they reproduced it it was the ignition switch. I doubt i got 2 bad ignition switches so i don't believe the error is being reported correctly. According to chevy they have no other reports of this..
View 2 RepliesImpala - Chevrolet :: Wheel Bearing Failure / Hub Assembly Replacement
I have 2012 Impala and hit a pot hole blowing out the left front tire but rim was not damaged, replaced the tire. Now the shop tells me that the wheel bearing has been damaged and the hub/bearing assembly needs to be replaced. I've never seen this happen. Is it possible that the bearing got damaged?
View 11 RepliesImpala - Chevrolet :: 2002 - Oil Pressure Switch Keeps Going Bad?
2002 cheverlot impala . the oil pressure switch keeps going bad and the diaphragm bust and oil comes out where the plug is. had to replace four in over a year . why and what make them go bad ?
View 12 RepliesImpala - Chevrolet :: 2002 Frequently Won't Start When Put The Key In Ignition
I have a 2002 Chevy Impalah 100k miles that frequently won't start. When I put the key in the ignition, I get lights, radio, and all electrical signs. But no sound from the engine. No matter how many times I try to turn the ignition, I get nothing.
But then when I stop trying and then come back to the car 5 to 10 minutes later, the car will start with no problem. This seems to happen randomly--sometimes first thing in the morning, sometimes after being parked for an hour. I can go for days with no problems and then it will start happening (randomly) again.
I just brought the car back from a dealership--they couldn't reproduce the problem and can't find anything wrong with the car. What systems or parts might be malfunctioning?
Impala - Chevrolet :: 2004 - Ignition Lock Cylinder Missing
I have an impala with a missing ignition lock cylinder. How to bypass the security with this component missing or know where to find the wiring schematic for this model. Every schematic I've found on the web aren't complete circuits.
View 5 RepliesImpala - Chevrolet :: Control Switch That Turns On AC Or Heat Is Not Fully Working Right
I have a 2003 Impala LS with around 114,000 miles. I noticed today that the control switch that turns on the AC or heat is not fully working right. My switch has 5 levels, and on levels 1 and 2 nothing happens. But when I switch to levels 3-4 or 5 it works just fine.
My question is is fixing this going to involve removing the entire dash from the car? My guess it's a contact issue, and figure it might be pricy to get repaired.
Impala - Chevrolet :: Gauges Sometimes Start To Click / Flicker And Move When Key Is Out Of Ignition
2003 impala 3800 ... My battery drains if i leave it hooked up over night: and the gauges will sometimes start to click and flicker and move when the key is out of the ignition: I have changed batteries 3 times in 1 yr and checked the alternator, everything is fine, I'm tired of disconnecting my battery every night before bedtime..
View 11 RepliesImpala - Chevrolet :: 2004 - Engine Would Not Turn Over / Ignition And Security Warnings
A year ago, I had a problem starting my car (a 2004 Chevrolet Impala, about 120,000 miles). When I put the key in the ignition, the engine wouldn't turn. I knew there wasn't a problem with the battery because my lights, radio, etc. were still operating fine. Instead, I got a bright flashing "SECURITY" message on the front panel of the car. After a few minutes pacing around the parking lot, I returned to my car and it started without a problem. I checked online, and several car forums and articles claimed that this was a common problem in 2004 Chevrolet Impalas: some faulty wiring in the security system would stop the car from turning on because it thought you were trying to hot-wire the vehicle.
After the first incident, I didn't encounter this problem again until recently. Within the last 2 weeks, this problem has become more frequent, occurring maybe 2-3 times per week. The car won't start and I'll get a flashing "SECURITY" message. If I wait a while (between 5 to 30 minutes), the car will eventually start. I finally decided to take my car into a Chevrolet dealership to get the problem fixed. I described the problem to the mechanic; she guessed that the cause was associated with the ignition cylinder....
Toyota - Sequoia :: 2001 - Ignition Switch Replacement Causes Blinker Failure
I just had the ignition switch replaced on my 2001 Toyota Sequioa. Now my blinkers work but will not shut off after I complete the turn. Additionally, the blinker "stick" is very hard to move in either direction. I plan to take my car back to the dealer and politely request this blinker repair be warranty work.
View 1 RepliesFord Aerostar :: 1995 - Ignition Switch Failure / Key Has Been Loose For Some Time
Key has been "loose" for some time. Would sometimes be able to remove it with engine running. Earlier today I could not return the key to shut off to stop the engine. Pulled a fuse to shut down the engine and then disconnected the battery. With the battery connection restored, the key will return to start and crank, but only will spin towards shut off and will no longer de-energize. Is this a cylinder replacement fix? Tried a very seldom used key to no avail.
View 14 RepliesImpala - Chevrolet :: 2008 - Won't Shift Out Of Park
I have a 2008 Chevy Impala. I've owned it for 14 months and put about 12,000 miles on it in that time. It's had basic servicing (rotations, oil, oil filter, cabin filter, etc. changes). It hasn't given me problems---but suddenly I have one and I'm not sure how major it is.
I made a drive from New York to Western Mass yesterday...couple hundred miles, but nothing huge. It drove fine all yesterday after I arrived...again, no problems. This morning, I went to start it...everything's okay. But then I went to shift it out of park...the button will not depress. I restarted a few times...no luck. I kept trying to depress the petal to shift it; I couldn't even shift it into neutral when not started. I am not sure what in the world is going on.
I've read numerous forums on this---it seems to be a common problem with these cars. What's not so clear is what to do with this. Responses range from---stick a screwdriver into some hole all the way to just go on and junk the car, it's useless. That's why I am coming here to get clearer guidance on resolving this problem, hopefully in an economical way.
Impala - Chevrolet :: 2008 - Hood Won't Stay Up
I have a 2008 Chevy Impala that I've owned for going on six months. It's treated me very well. I'm just now getting ready to give it a nice wash/interior cleaning this evening, but I noticed while cleaning under the hood just now that I cannot get the hood to stay up on it's own. I'm not sure what the issue is. I keep nudging it gently, but that's not working. As recently as yesterday I had the hood up when I was checking the oil...it stayed just fine.
Of course, the pre-2014 Impala generation has hoods without the manual supports. So what might the problem be here? I figure this car is a little new to be having a problem like this.
Impala - Chevrolet :: 2008 Hesitates At 2000 RPMs
My Impala hesitates at 2,000 RPMs At every speed level. My mechanic and the Chevy dealer can't figure this out.
View 1 RepliesImpala - Damage - Chevrolet :: 2008 - Scratches All Over - How To Paint It
My car has fairly deep scratches on the trunk, roof, and hood. It's a red, 2008 Chevy Impala. I'd take pictures---but it's too painful. There are numerous thin scratches on each of these surfaces. I'm going to take it to a body shop to get an estimate, but I know I am probably not going to like what I hear. No, my insurance does not cover this (I only have liability). So...Am I going to need a completely new paint job?
View 19 RepliesImpala - Chevrolet :: 2008 - Hard Shifting After Start Up
My '08 Chevy Impala (116,000 miles) has had a recurring issue over the past few months. After I have first started it, and for maybe the first 15 minutes it is running, it has been 'shifting hard' from 1st to 2nd gear. Basically, the engine revs much higher than it normally would and it 'thunks' into second gear. If I intentionally push the gas slower it does not happen. The guys who service my car (not Chevy) told me that my Transmission fluid level is fine.
View 2 RepliesImpala - Chevrolet :: 2008 - Vibrations And Squeaking Sound From Hood
I've owned a 2008 Chevy Impala for about 7 months. It's at about 115,000 miles. It runs great...haven't had any problems out of it. So far. But there are a few things that concern me.
When I start the car, I hear this squeaking noise under the hood. I do not always hear this---it seems as if it may be tied with cold weather, like it's something that only occurs in the morning. But regardless, it seems abnormal. It subsides after a few minutes. The other thing I am noticing is that normally within the first 10 or 15 minutes of operation, if the car is at a stop light I'll hear some strange humming accompanied by vibrations. Sometimes the lights will flash faintly when this happens.
When I first purchased the car, I had a mechanic check it out. The engine, transmission, radiator, etc. were in excellent condition. I'm hoping that this is not anything serious, but I figure these are still sounds that I should not be hearing with a car in good condition.
Impala - Chevrolet :: 2008 - Interlock Shift Button Would Not Depress
I have a 2008 Impala that has been having interlock shift issues for about a week. The interlock shift button would not depress. I was able to remove the center console and take a look at some of the wiring. It there's a bundle of wires and there is a black wire that appears to be severed. From what I've read, this is a common problem with the Impala models from 2006 through 2008...it should have been a recall, but for some reason was not. How can I do a low-cost DIY repair on this that's going to be solid and prevent recurring problems?
View 3 RepliesImpala - Chevrolet :: 2008 - Parking Lights On The Entire Day / Car Just Would Not Start
I drove to work this morning and parked my car (around 10:30AM). I return to my car at about 9:00PM. I approach it trying to unlock it using my remote. I keep hitting the button as I approach...it does not work. I unlock it manually and get inside and put the key in ignition...absolutely nothing happens. No lights, no dashboard, no...nothing.
Then I remember...I left my parking lights on the entire day! That must be what's wrong...
I go and grab some portable jumper cables and...boy did I kill some time trying to elicit a reaction. When I hooked it up, the car came alive completely...it just wouldn't start no matter how long I let it sit. I would simply hear a single click. So, I went a grabbed another set of portable jumpers and....same exact thing. By the time the tow guy came around, he tried it with his portable cables as well and...same exact thing.
I am trying to figure out what in the world is wrong. I replaced the battery one year ago, when I had trouble starting it. So...the battery is new and, by all appearances, in good condition. Outside of that, no history of starting problems whatsoever...which is what makes all of this so incredibly confusing.
Impala - Chevrolet :: 2008 - Heater Blowing Cool Air While In Park
My wife has a 2008 Chevy Impala with over 80,000 miles. When the weather is cold, the heater will blow cool air while in Park, even with the car warmed up. Then, once it is put in Drive, the heater begins to blow hot air again. Again, all of this time the engine temp gauge is in the middle position.
View 2 Replies