Mazda - 626 :: Squeaking Clutch During Depression / Losing Brake Fluid
"I have a 1997 Mazda 626 w/ 198k miles.... The clutch is making a squealing noise when depressed and I am losing brake fluid."
View 5 RepliesFord - Fiesta :: Stuttering / Loss Of Power Now Won't Stay Running When Engine Is Cold
I have a ford fiesta that first of all started off stuttering/loss of power and now wont stay running when the engine is cold ...... 1.4 54 plate ....
View 4 RepliesGTI 337/20th Anniversary :: Loud Clunking Noise When Release The Clutch
Car was great this weekend, then on saturday, every time I shift my car clunks right near the tranny when I release the clutch. Its a loud noise. Clutch was done around 2500 miles ago. South Bend stg 1 with a LWFW (I know, wish I stayed with a DM). And if I drive in first and second and come off the gas without shifting, it also knocks once really loud. It isn't a back fire or anything it almost feels like the dogbone mount is bad? Also, over 4000 rpm my car sounds deeper sounding than before.
View 7 RepliesGolf IV R32 :: Warble Noise When Release Clutch Pedal To Accelerate
When I release my clutch pedal to accelerate, there's I guess a "warble" noise is the only way i can describe it. its been like this since i got the car a couple months ago. Is this normal?
View 4 RepliesGolf/GTI VI :: Engine Revs High On Startup And Release Clutch Noise
I have a MT '12 Golf 2.5L with around 8k miles. I always park with the transmission in neutral. When I first start it up in the morning, the engine revs high, around 1500RPM, so I can clearly hear the engine inside the car. I start it, it revs up and holds, and when I release the clutch I hear what sounds like a rev, but the tach doesn't move.
I believe the GTI doesn't need the clutch depressed for the entire turn over, but the Golf does, so I have to hold it until the engine is running. It may not be a big deal, but I'm just wondering why releasing the clutch in neutral would make a noise. I don't hear it any other time than at start up.
Ford - Fiesta :: Will Not Start / Key In The Ignition And All Interior Lights Came Up On Dash
Our 2011 Fiesta wouldn't start, key in the ignition and all the interior lights would come up on dash and interior. Friend of mine said, "sounds like a relay", came over and he swapped the low beam relay to the starter relay (said they where the same), car started just fine.
We put the bad relay in the glovebox, and planned to run to the auto store today. Except today it won't start in the exact same way it wouldn't start yesterday. Do i have 2 bad relay's in 2 days? Or as i suspect is this is a sign of a bigger issue?
Ford Ranger / B-Series :: 1993 - Clutch Release Bearing Install
93 Ranger, 4.0 liter, 4WD.....
Putting in a new clutch and clutch release bearing, and am wondering if I need to put the retaining ring in that came with the new clutch release bearing? When I took off the old release bearing, a ring did come off from somewhere, but I did not see where it was because it was so dirty.
The reason I ask is because my Haynes manual did not even mention a ring, so I was surprised to see one come off. And my manual does not say to reinstall the ring when installing the release bearing. I did get a newer Haynes manual at the library and looked through a bunch of Chilton, etc manuals.
The newer Haynes manual says to remove the retaining ring on 97 and newer models, but says nothing about putting it back in when reinstalling. So, I am not certain if I need to put a new retaining ring in with the new release bearing.
Ford F-150 - 1997-2003 :: 2001 - Shaking In 1st Gear When Try To Release The Clutch Slowly
I have a 2001 ford f150 4x4 xlt and it seems to be shaking violently in first gear when I try to release the clutch slowly. The person i bought it from said he had a new clutch put in this year So i don't think its the clutch. What could be the cause of it before I take it in to be checked.
View 2 RepliesGolf IV / Jetta IV :: VR6 Could Not Go In Gear When Release The Clutch
I drive a 24v vr6 GTI in 6-speed I was coming home and as I turned and got on the gas a little and all of a sudden there was a pop and my car couldn't go in gear when I release the clutch. Luckily I was close to home and basically cruised in neutral. I jacked it up and found that my axle is twisted. Now I was aware the boots were torn before so I'm assuming the axle got screwed up but my other concern is, why won't my car go in gear? Here's the photo of inner CV. I'm hoping it's just an axle and not the clutch.
View 8 RepliesElantra XD (2001-06) :: Clutch Fork Stuck / Does Not Release
2002 Elantra
Replaced new clutch disc and new pressure plate.
Without turning on the engine, the clutch pedal seems to get harder to press, until it can't be pressed down anymore. The pedal can't be pressed down.
Clutch fork lever does not release.
Golf IV / Jetta IV :: 4th Cylinder Occasionally Misfire If Release The Clutch At Too High Of A Rev
MkIV 2.0 ... My 4th cylinder will occasionally misfire if I release the clutch at too high of a rev. It is intermittent but happens if I do a burn out or something. How to fix this other then stop doing burn outs and such.
View 2 RepliesFord F-150 - 1997-2003 :: AC / Clutch Bearing Making Noise - New Starter And Still Won't Start
I have a 2000 F150 XLT 5.4L truck. I noticed the AC went out about a month ago and since then I could hear the AC/Clutch bearing making noise. Well I went to start it the other day after eating dinner out and it wouldn't start. It sounds like it wants to start but it just doesn't have enough umph. I replaced the starter and charged the battery up to 100 percent. It still won't start.
If I take the belt off it will start and I checked the AC/Clutch and I can move it with my bear hands. I tried disconnecting the AC/Clutch fuse and relay but that didn't work. Is it possible that the Clutch is freezing up when I try to start it?
Prius C :: Eject Button To Cover Empty Smart Key Depression?
I'm looking for a button that would fit into the empty smart key button area for my Prius c II. I'd love for it to say the word "eject". Really, anything that would be that size would be nice. It seems like a great spot to add a bit of flair!
View 4 RepliesFord - Fiesta :: 2013 - Blower Not Working?
I have 2013 ford fiesta and the fan wasn't turning on!? It sounded like it wanted to and this is the first time I'm having problems with it. It was -23 out yesterday so that could b it but it's above 0 now and still not turning on?
View 6 RepliesFord - Fiesta :: 2012 - Stammers And Stutters Into 2nd Gear
Owned care for just 1 year. Always seemed to "search" for 2nd gear, now "stammers" and "stutters" into 2nd and starting to do same into 3rd. Dealer says that care "needs to get to know me and how I drive." I say: it must know me by now, so assume it just doesn't like me? Have heard horror stories about being abandoned, etc. My question: do I continue to try to get dealer to fix? or just trade car.
View 2 RepliesFord - Fiesta :: 2011 - Automatic Transmission Won't Engage
I have a 2011 Ford Fiesta and yesterday morning I went to start it and the check engine light came on. When I tried to shift into reverse, the gear lever moved but the gear wouldn't engage. None of the other gears worked either. I turned the car off and back on again, and it was fine (the check engine stayed on, though). I have to repeat this process every time I start the car, and this afternoon it took three tries. This a low-mileage car: I bought it brand new a little over 4 years ago, and it's barely over 20,000 miles. I have an appointment scheduled with the dealership, but is this something that's going to cost me a lot of money or is it just a computer issue? One other detail: it was very very cold the night before the issue started (about -10 degrees).
View 19 RepliesFord - Shifters - Fiesta :: Is Ok To Shift Into Neutral At Stops?
This may be an old question: is it beneficial to shift into neutral while coming to a stop in an automatic transmission? But, my new Ford Fiesta has a PowerShift 6-speed transmission that behaves differently from a standard automatic. According to Ford, it's "like two 3-speed manual transmissions put together, with the dual clutch and shifting components controlled electronically."
Since the PowerShift is really a computer-controlled manual transmission (without a fluid torque converter), it's actually in neutral when I'm stopped and the shifter is in Drive position. I can feel it disengage as I come to a stop. However if I try coasting to a stop uphill, the engine still pulls the car upward at low speed without my foot on the accelerator. So the computer has to judge when to activate the clutch.
The issue is, I tend to apply the brakes lighter than average and decrease speed at a slower rate to come to a stop. So I think I might be confusing the computer, working against the engine before it wants to disengage the clutch, whereas most people would come to a stop more abruptly and the shifting action would have no problem. This is why I shift into neutral early in my slow-down phase, so the engine doesn't have a chance of pushing the brakes.
Ford - Fiesta :: Oil Light Comes On When Stopped / Engine Seemingly Shut Off
I have a 2011 Ford Fiesta with a little over 90k
Last week I had just gotten gas, i was about to turn out of the gas station when I stepped on the gas the car moved forward slightly before the oil light popped on and the engine seemingly shut off. I put the car in park, turn the engine off and started it up. It turned on just fine and drove like normal as I headed home, first thing the next morning I went to get my oil changed as I was overdue. I was definitely low and my oil(5w30) was changed.
The problem did not repeat itself until 4 days later while out running errands. It happened again twice today...once while again turning out of a parking lot and also while about to turn at a light.
Ford - Fiesta :: 2011 - Rattle Which Occurs Essentially When Going Up Hills
So I just started leasing a 2011 Ford Fiesta, with an automatic transmission, which as I'm told is actually an automated manual. In any case, from day one the car has had a terrible rattle coming from the driver's side of the vehicle, which occurs essentially when going up hills, starting from a stop, and basically between shifting.
I looked it up online, and found some articles talking about Ford replacing transmissions, and some other similar complaints. When I took it in to the dealer, since I felt that it's ridiculous that a brand new car should have any rattle at all, they said they had to update the software for the transmission, and that may work. Now, over a month later, it still rattles quite a bit.
My question is, how normal is this? Is there any information about the Fiesta's transmission or other parts that say it rattles, but that it's not something to worry about? I was told at the dealership that due to the type of transmission it is, it would rattle occasionally, and that it should improve as the computer learns my driving style. I just think it's absurd that I should hear such a noise, which is clearly not what I would call normal engine noise.
I have to note that this is also only my second car, and I have had very little experience driving American cars, since most of my life I've driven exclusively Japanese cars. I don't know if it is just normal engine noise for a Fiesta, or if it's something to bug the dealership to get fixed while it's still under warranty.