Cavalier - Chevrolet :: 2004 - Clutch Loose When Put Car In Gear
So i went to put my car in gear and the clutch is loose. car turns on just fine. there is clutch fluid. I've never had this problem till this cold weather popped up.what do i do? wait till the car warms up? I can put it in gear when the car is off so idk why it does that.
View 8 RepliesNissan - Versa :: 2007 - Clutch Feels Loose And Slight Grinding Sound When Shifting Only From Neutral To First Gear
Still chugging along!!
So, I haven't been the kindest car owner to my poor little hatchback. I do my best to get regular oil changes, but other than replacing the brakes last year, I have not kept up with most of the manufacturer's suggested regularly scheduled maintenance. The car has about 130,000 miles. Manual Transmission. My clutch feels a little loose, and I have been noticing a slight grinding sound when shifting (only from neutral to first gear).
Toyota - Solara :: Hard Time Engaging The Clutch / Burning Smell Emitting In Car
My girlfriend has a 2001 Toyota Solara. I've been driving it, infrequently, for about 3 years, and while it's an older car, I never had any problems engaging the clutch. My girlfriend also did not have any issues with the car. I don't have a lot of experience with manual transmissions.
Recently, we let our friend use it for the day. I dropped the car off at his place and did not notice anything wrong with it. The next day, I got a call from my friend who said that the car was emitting a weird smell and that he was having a hard time engaging the clutch. By the end of the day, he could no longer engage the clutch and had to leave it on the side of the road.
We got it towed to a garage, and when they looked at it, they said the clutch was totally burned out. My friend insists that he has plenty of experience driving with a manual transmission and that there must have been a problem with the clutch before we gave him the car. Is this possible? It seems unlikely to me, as neither my girlfriend nor I had any problems with the car. It's not like we were struggling to engage the clutch- it was fine when I dropped it off, and then the next day it's totally burned out.
Ford Excursion :: Hard Time Getting Out Of Park And Into Gear
Lately (within the last couple of days) when we park the Excursion we have a difficult time getting it out of park and into gear whether it is going in to Reverse or Drive the gear shift does not want to move.
I have not forced anything at any time but eventually with some pumping of the brake pedal and some putting into park and out of park we can free it up. This is something that happened virtually overnight and once we are in gear everything is normal.
What is causing it? I am making an assumption that it has to be some switch in the steering column but I am no mechanic and only guessing.
Brakes - Chevrolet - Blazer - Clutches :: 2001 - Push Clutch Hard Almost Through The Floor To Start The Car
I recently purchased a used 2001 Chevy Blazer with a manual transmission. In order to start it, I have to push very hard on the clutch, almost through the floor. Is there some type of adjustment to make starting a little easier? Also, when I push on the parking brake, it also goes right to the floor and seems like it barely engages.
View 1 RepliesAccent LC (2000-05) :: Need To Push Clutch Really Hard To Allow The Gear To Engage?
2001 Accent 1.5 GL 165K miles.
The clutch doesn't engage until it's on the floor. I have to push real hard to allow the gear to engage. It then shifts... sometimes smoothly, sometimes it takes a hard push of the gear shifter, or it grinds until getting into gear.
I've changed the master cylinder twice in about 3 years but those times the pedal had no spring and just fell to the floor and stayed. Now, the pedal has spring (I push it to the floor and it springs back) so I assume the MC is ok. I even bled it with fresh fluid.
I'm not sure if the tranny fluid has ever been changed. Would changing the fluid fix this problem or does it sound like I need a new clutch? I'm guessing it needs a new clutch (or corresponding parts) since I've had two MC's go bad in a few years.
The pedal, even when it's shifting smoothly is pretty non-responsive and still engages a little mushy (comparing it to my 2012 Elantra 6sp).
Nissan - 300zx :: Clutch Pedal Very Hard And Cannot Put It In 1st And Reverse Gear
I have a 89 nissan fairladyz32 (300zx) and when i push the clutch peddle in it is very hard and i cant put it in 1 and reverse when it is running but when it is off i can just fine. but then if i put it in 1 gear before starting it and push the clutch in to start the car it lurches forward a little what could this be? and when i leave it to idle for to long it puffs smoke or at first start up? It has about 80,000 km.....
View 6 RepliesFord F-150 - 1997-2003 :: 4R70W - Trans Has Hard Time Getting Into 1st Gear
The truck:
2000 4X2 F150
4.2l V6
280k miles/ some towing
The problem : The trans has a hard time getting into 1st gear. When you put it into gear you have to rev it to about 3k (when it's warm, 4k when cold) RPMs at which time you feel a definite engagement and it goes through the rest of the gears just fine. Once it's warm it will do stop and go traffic as long as you start it with the OD off.
The background : Orobably the stock motorcraft filter on there, and I don't think the oil has been changed in the life of the trans, but I do know that it's never been ran low on fluid. I took a gander at it and found a plug where a gear type speedo went on older models to be loose and leaking. tightened it up about two full turns. also noticed what looks to be a leak where the main case meets the output shaft housing. now I know neither of these are the cause of my headache but I do wonder if the second leak might be a sign.
The research : I've been looking for almost a week now for a solution. I've been all over TCCoA, Explorer Forum,10 pages of search here on FTE and various other Ford based websites and have come across a single thread with the same symptoms but the OP never came back with a solution.
The plan : A fluid/filter change (and flush) is definitely in the plans as well as inline filter for my own satisfaction. from what I've read the stock 1-2 accumulator is known to go bad on some of these and if I have the pan off might as well check anyways.
Ford 7.3L Power Stroke (1999-2003) :: Hard To Get Clutch Into Gear At A Stop
Well, I think my clutch is falling apart. I am hearing an intermittent nasty noise coming from somewhere in the bell housing/oil pan area. It comes and goes, but seems to be more frequent lately. It sounds like a dryer that somebody threw a pair of sneakers and some rocks in; with a metallic clunking noise of something being "churned" around. As I said, sounds almost exactly like the dryer thing.
The clutch does not seem to be slipping, but I do occasionally have difficulty getting it into gear at a stop. I'm guessing that the clutch disc has thrown a hub spring, and its rattling around in the bell housing. Assuming I need a clutch; which I think I do, I need selecting one. I have no history on the clutch or flywheel, so I will assume that I need a new flywheel to match whatever clutch I get.
I can't get a stock replacement, due to the injectors/chip/etc.... I would estimate I am making about 350hp/700ft-lbs. I don't tow currently, but I may pull a car trailer in the future. I DO haul heavy loads in the bed (4,000lbs) on a regular basis. I also drive/shift aggressively, as well as shifting quickly. While I spend a decent amount of time on the highway, I also do a lot of stop and go stuck in traffic driving; so smooth engagement is important. So, no ceramic/ceramic in/out type clutches.
I do NOT want a South Bend. I don't want a super soft pedal. Also, the whole pedal-sticking-to-the-floor thing they mention is unacceptable. Personally, I think they should be ashamed of themselves for putting out a product with such an obvious unsafe design/engineering flaw, and then try to explain it away as "normal". Nope. They need to go back to the drawing board and fix that. As I said, it constitutes a serious safety hazard.
Passat (B5) :: 1998 - PRND321 Lights Illuminated All The Time And Downshifts Hard Into 1st Gear
I have a 1998 Passat 4cyl turbo. Recently the ICM module on the air box went out when I had No Fire on 2nd cyl from the front. Replaced it with a MPGauto part for $63. It fixed the problem but, I noticed that now the PRND321 lights are luminated all the time and downshifts hard into 1st gear. Also should I be concerned that I need another catalytic converter b/c I drove another 40 miles with it missing and it (CC) was very hot. Do they break down inside? The car runs great. Is my problem related to this china part not having a special VW code or can the car be reset?
View 1 RepliesFord Ranger / B-Series :: 1986 - Transmission Overhaul - Hard To Get Clutch Into Gear From Neutral
Rebuild on the Mazda 5 speed transmission. My 1986 Ranger 2.3 Four cylinder has 280,000 miles and the clutch has never been replaced. It's not slipping but I'm having trouble getting it into gear from neutral. Was told that the release springs on the clutch plate have weakened causing the clutch to not release completely so figured it's time to replace it. It's done well the last 280,000 miles. The question I have : overhauling on one of these Mazda trans and how difficult was it. Any special tools required, etc...I see Autozone has a rebuild kit which appears to have bearings, seals and gaskets. Figured while it was out I would go ahead and rebuild it myself if I can. Rebuilt a few engines but never touched a trans.
View 4 RepliesFord - Focus :: 2003 - Cranks Fine But Now Sputtering / Hard Time Switching Out Of First Gear
I have a problem with my 2003 Ford Focus ZTS. It has a 2.0L ZETEC engine and is automatic. I recently replaced the Starter, Alternator, and battery cable because the car was having some current issues. All parts are brand new, non-refurbished. The car cranks fine but is now sputtering. When I drive it, it seems like it has a hard time switching out of first gear and and will hit 3-3500 RPM before the gear shifts.
View 1 RepliesChevrolet - Avalanche :: Transmission Shifts A Little Hard Going From 1st To 2nd Gear
Have a 2002 avalanche Z71. Transmission was rebuilt 33k ago. It currently shifts a little hard going from 1 to 2nd. Real problem shows up between 40 mph and 50 mph. It suddenly shifts into overdrive which drops the engine rpm waaay down and starts lugging the engine.
Took it back to the guys who did the rebuild. They drove it around and noticed that the computer reported no codes. They claimed it was the TPS and said to replace it. I did. Problem is still there.
Took it to a highly trusted mechanic. They said they think the valve body needs replacing but they don't do transmissions. The guy they recommend drove it around and he thinks it is the torque converter.
I am wondering what causes the computer to decide when it is time to shift into overdrive and I am wondering if there is some sensor that has gone whacko and needs to be replaced instead of starting to tear the transmission apart.
Impala - Chevrolet :: Big Clunk And Hard To Shift Usually In First Gear
My 2005 Impala will have from time to time a hard shift where there is a big clunk_usually 1st gear. I had it at a transmission shop last year and they could not find anything wrong. What is going on.
View 3 RepliesFord Super Duty (1999-2016) :: 1997 - Uphill 4th Gear Very Hard - Clutch Slipping?
I have a 1997 F250 heavy duty 4x4 7.5 efi. I just bought a 2003 weekend worrior weighing 5800lbs dry. When I go up slight hills in 4th gear it seems to work real hard especially on freeways, could my clutch be slipping or am I just at max tow
View 11 RepliesChevrolet - Blazer :: 1998 V6 Transmission Shifts Hard Out Of First Gear
I have a 1998 chevy blazer v6 about 127024 miles. My transmission shifts hard out of first gear when i get to 4 gear and it shifts hard. When car warms up really good car shifts find out of first gear but 4th gear still shifts hard. I did change transmission fluid and new filter in it and I check fluid level and it's full.
View 6 RepliesChevrolet - 1500 :: 2010 - Shift Extremely Hard Into Second Gear From First
I have a 2010 Chevy 1500 extended cab. For a few years it was a daily driver. It has 54000 miles. For the last 1.5 years I have been driving a company vehicle so my truck sits a lot and usually only gets driven once a week when I'm off running errands and such. Recently if I drive it just around town a few miles here and there, everything is fine. But if I drive it to a farther location say 20-30 minutes away the truck will start to shift extremely hard into second gear from first to second. The first time it happened I though I got rear ended by another car only to look around and no one was behind me. I wouldnt think the trans. would be going out at 54000 miles.
View 5 RepliesHonda - Accord :: Clutch Pedal Making Slight Snap Sound / Hard To Get Car To Engage In A Gear While Sitting Still
My clutch peddle made a slight "snap" sound last night and now it is very difficult to get the car to engage in a gear while sitting still, while moving it does ok, but not nearly as smooth as it should be. The other odd occurrence is that while the motor is running and the car is not moving, you can't shift any gears at all, but as soon as you cut the motor, all 5 gears and reverse are easily accessible. Why the sound at the peddle and the trouble in the gear shift mechanism? I am only an advanced beginner with car repair, but I think think this is really bad... 2007 Honda Accord Manual Transmission
View 8 RepliesGolf IV / Jetta IV :: Clutch Seems To Be Loose / Brake Fluid Is Leaking
I have an 04 GLI 1.8T 6speed. It is very clear to me that the car has some hydraulic issues. I can't leave the clutch in for more than 10 seconds or it stays on the floor and I have to pull it back up with my foot. So what does this mean? (Besides the fact that I'm a double clutch king now) I couldn't wrap my head around why this was happening and thought at first it may have something to do with a hole in the Slave Cylinder that is allowing air into the lines. Neither confirmed nor denied yet.
My other problem I have is that my car is losing brake fluid at about a quart every 3 weeks. I'm no expert but that is alarmingly fast, and it is getting worse by the month. When driving I get the error message of STOP and my brake light flashes, which is how I know it is low. I can't locate the leak but I do see a drip coming from somewhere behind the drivers side front tire, relatively close to the firewall. I don't know if I have a broken brake fluid line that is dripping down, or if something else could be broken that is causing the leak.