Chevrolet - Blazer :: 2001 - A/C Clutch Not Spinning
I Turn On The A/C To Max On My 2001 Blazer and A/C Clutch Will Not Spin. My Freon Is Full. How Do I fix This.
View 5 RepliesExpedition :: Brakes Push All The Way Down To The Floor
Wife drove her truck yesterday and not one issue... Today she has no brakes. I checked the fluid and I'm going to try and bleed the brakes but would like to know what else I need to check>
I was in her truck yesterday going to church.. so I don't get it. The brakes push all the way down to the floor.. When you pump them they seem to build pressure but loose it..
Toyota - Tacoma :: 2003 - Clutch Not All The Way Disengaged When Push The Pedal To Floor
The clutch on my 2003 Toyota Tacoma has been acting funny for a while. I have to pull the pedal back up with the top of my foot about half the time, otherwise it acts like the clutch isn't all the way disengaged when I push the pedal to the floor. The master and slave cylinders have both been replaced as well as the clutch pedal mechanism itself (thought it might be the spring). I adjusted the push rod a little bit and it seems to have worked slightly but it's definitely still a problem.
View 3 RepliesFord 7.3L Power Stroke (1999-2003) :: When Push The Clutch To Floor Its Not Disengaging All The Way
In my 99 with a zf6 it seems like when I push the clutch to the floor it's not disengaging all the way. It has a newer valair clutch in it maybe 15000 miles on it. It's really hard to get the truck in reverse or first from a stop. If the truck is stopped and it's in reverse or first with the clutch to the floor it will move in that gear. Is there a adjustment on the clutch? I'm thinking no since its hydraulic....
View 14 RepliesFord Super Duty (1999-2016) :: 2009 F250 4x4 - Rattling When Push The Clutch Pedal To The Floor?
My stock 2009 ford f250xl 4x4 with a 5.4 and 6 speed has been giving me a weird sound lately started about a month ago and only happens on a cold start situation meaning if it sits over night it will do the sound. the sound goes away after 3-5 min of warm up in my driveway, the sound happens when i push the clutch pedal to the floor. it has no pronounced abnormal sounds through out the rest of the day when its hot which perplexes me, check out the vid on my u tube site for a sound of it.
MAH00111 - YouTube
MAH00115 - YouTube
Chevrolet - S-10 :: Thumping Or Banging When Push The Clutch In
(That was my first mistake). He did it in his garage and everything seemed fine. Then about 2 weeks later I noticed that when I pushed in the clutch to shift gears it would come out of gear fine but, did not want to go into gear without a wrestling match between me and the gear shift. It didn't grind or make any noise it just refused to go into gear like I was pushing and some invisible wall had dropped preventing it from going back into gear. It doesn't always do it. I have noticed no pattern in when it does it.
Sometimes Ive been driving a while and it starts, other times I just started the car and within minutes of driving down the road it starts refusing to shift back into gear. I have noticed when It gets really bad I hear and feel this thumping or banging when I push the clutch in. When I pump the clutch a few times, sometimes this works to get it back into gear. At times it is so hard to put back into gear that I have had to use both hands on the clutch to force it into gear.? I have discussed this with some people they think it is my "pressure plate" (what ever that is). I do know that when the guy put the new clutch in he was not able to polish something down? The new clutch was installed about may 2012.
Accent LC (2000-05) :: Need To Push Clutch Really Hard To Allow The Gear To Engage?
2001 Accent 1.5 GL 165K miles.
The clutch doesn't engage until it's on the floor. I have to push real hard to allow the gear to engage. It then shifts... sometimes smoothly, sometimes it takes a hard push of the gear shifter, or it grinds until getting into gear.
I've changed the master cylinder twice in about 3 years but those times the pedal had no spring and just fell to the floor and stayed. Now, the pedal has spring (I push it to the floor and it springs back) so I assume the MC is ok. I even bled it with fresh fluid.
I'm not sure if the tranny fluid has ever been changed. Would changing the fluid fix this problem or does it sound like I need a new clutch? I'm guessing it needs a new clutch (or corresponding parts) since I've had two MC's go bad in a few years.
The pedal, even when it's shifting smoothly is pretty non-responsive and still engages a little mushy (comparing it to my 2012 Elantra 6sp).
Toyota - Corolla - Clutches :: 2001 - Hard Time Picking Up Speed
I have a 2001 Toyota Corolla 5 speed manual that is having a hard time picking up speed, but the engine will rev as high as your willing to push down the pedal. The engine runs well its just not affecting the speed of the car very quickly. We replaced the MAF sensor recently and it made little to no difference.
View 2 RepliesAccord :: 1998 - Have To Push Brakes Really Hard To Get To Stop
I have a 98 Accord with rear disc brakes and ABS. The rotors on the rear brakes are rusted like the pads are not grabbing at all and when you push on the brakes you have to push really hard to get it to stop. I did tests for the booster to see if it is working and it seems to be. Right now I'm thinking it may be the proportioning valve.
View 4 RepliesFord Excursion :: Brakes Hard To Push To Stop?
Ok, my brakes have felt the same since I got the truck. I push a little harder than I should have to (not a hard pedal, but further to the floor than normal to where it's harder to push) get the truck to stop. If I want to brake check someone that's riding my bumper I have to REALLY smash the pedal and even then it doesn't grab hard or lock up. Since I have owned the truck I have put all new pads, rotors, and calipers on, Russel braided lines front and rear (all 3 on the rear), and flushed ALL of the old fluid from the truck (Twitch and I went through 2 large bottles when we did the brakes).
[URL]...
After all of this there has been no change in my brakes at all. Not one bit. What's odd is sometimes after it rains when I first get in the truck the first time I stop I get massive awesome brakes, but just the once. I never have a spongy pedal, and I never lose pressure, I just have brakes.
Dodge - Neon - Misfire - Clutches :: Hard To Start At Times
I've had problems recently with my 03 Neon:
1) The CMP sensor throws codes constantly and the car is really hard to start at times. I replaced it a year or two ago with a generic part. From what I've read elsewhere, Neons hate non-Mopar parts for this so I just got a Mopar replacement and will drop it in when I get the valve cover back on. Does it make sense that a replacement could go bad w/in 20k miles or so?
2) Cylinder 1 misfired pretty hard. I accelerated on the highway and heard a thunk or thud w/ a loss of power. As the only code I got was a misfire I drove it home slowly (about a mile). Could this be caused by fouled plugs from the repeated hard starting? (I lived with the CMP sensor being bad through the MN winter cause I didn't want to replace it until it was warm). Should I look into this more? The thunk really worries me...
3) Last spring at about 95k miles I noticed what felt like my clutch slipping a lot. It would almost always slip under even partial acceleration at highway speeds and occasionally at lower speeds. I'd notice the rev increase w/o increasing tire speed. I took it to a major chain and they took a week to replace the clutch... but ever since then I've felt occasional slips. Did they do their job? Or is there something else here? I don't have a tach but I have a scan gauge ii hooked up which does show rpm increasing significantly w/o speed increasing.
Chevrolet - Blazer :: 1998 V6 Transmission Shifts Hard Out Of First Gear
I have a 1998 chevy blazer v6 about 127024 miles. My transmission shifts hard out of first gear when i get to 4 gear and it shifts hard. When car warms up really good car shifts find out of first gear but 4th gear still shifts hard. I did change transmission fluid and new filter in it and I check fluid level and it's full.
View 6 RepliesGTI 337/20th Anniversary :: Clutch Sticking When Released And Gears Only Engage When Push Hard Shift Knob
Been having trouble shifting into any gears on these chilly mornings in VA now... The clutch has been sticking on its way out when I release it and the gears don't want to engage unless I really push hard on the shift knob.
View 11 RepliesChevrolet :: 1996 Blazer Won't Start In The Rain
Why will the 96 Blazer not start in the rain? Replaced almost all electric components from key cylinder to plugs. It is grounded somewhere when wet.
View 3 RepliesChevrolet - Blazer :: 1997 - A Lot Of Cranking At First Start In The Day
my 97 chevy blazer has a lot of cranking first start in the day. I changed the rotor and distributor cap but I don't smell any fuel then all fo asudden it will start. I am wondering is it a fuel relay problem, a fuel filter, or some sort of sensor. when it does start it is very smooth running no shaking or hesitation full of power for the rest of the day starts and stops erands . is it worth buying a plug in code gadget and will this problem show up as a code.
View 4 RepliesChevrolet - Blazer :: 1999 Turns Over But Does Not Start
Vehicle turns over, but does not start. I do not hear the fuel pump when the vehicle is switched on. Fuel pump was replaced back in December 2010.
View 1 RepliesChevrolet - Blazer :: 2001 - Vibrates While Accelerating Or Maintaining Speed?
I have an '01 Blazer that's had a strange vibration for some time now. Here are the particulars:
It's a low frequency rumbling It happens only between 45 and 60 mph It tends to come and go It usually starts after about 5 minutes of driving first thing in the day It generally goes away after awhile and may not happen the rest of the day It happens only when I'm accelerating or maintaining speed on an incline It happens when it's hot, cold, wet or dry
What I've done lately: replaced all the brake pads replaced one rear rotor and caliper slide pins (one pin was frozen and the rotor was badly worn Checked the U-joints, which are sound
Chevrolet - Blazer :: 2001 - Won't Engage - Hi / Low Button On Dash Keep Flashing?
I Have A 2001 Chevy Blazer The 4x4 will not engage. I Press the 4x4 Auto, Hi or Low button on the dash they just keep flashing. you can hear the transfer case engage, but It will not be in 4 wheel drive. I have tried driving around with the light flashing to see if it would engage it did not.
View 9 RepliesGasoline - Chevrolet - Blazer :: 2001 - Fuel Pump Quit Again?
I replaced the fuel pump in my 2001 chevy blazer last year and it just quit again two days ago. Internet research leads me to believe it is a common problem in chevy turcks. Blazer stops running, sits for a few hours to a day and then starts up again. Is it going to happen again and is it really the fuel pump.
View 4 Replies