Accent RB (2012+) :: Squeaking Noise After Accelerating From A Complete Stop
I bought a 2012 Hyundai Accent GLS just two days ago. It has about 38,000 miles on it. It's an automatic as well. I drove it home on the highway and was averaging about 44 mpg the entire time. Even while driving in town, it's got pretty good fuel economy. Everything about the car is great.
However, last night, I was driving around. When I came to a stop at a stop sign/red light/etc. and then proceeded to accelerate, I would hear this weird squeaking / creaking sound. I've heard it multiple times now since then. It doesn't do it every single time I accelerate, but when it does, it lasts for about 3 seconds and then stops. I've also noticed it does it sometimes when I make a turn and then accelerate. It's just a squeaking sound.
Is this something I should be concerned about? It doesn't do it every single time I accelerate, but when it does, it will last for about 3 seconds. I should also note that the car made the noise the first night after I had been driving for a while, so the engine wasn't cold or anything.
Ford Excursion :: Squeaking / Squealing Noise When Letting Off Gas After Accelerating
This squeaking/squealing noise only happens when letting off the gas after accelerating 70%+ throttle. Quickly letting off the gas after revving up makes the noise . It sounds like it comes from under the drivers side door, and does NOT sound like a turbo. Its a creaky/squeaking noise.
Wont happen in park, does happen in 2wd or 4wd, on highway or in city. [URL] ....
TrailBlazer :: 2005 EXT 4wd - Squeaking Noise From Front Driveshaft
I have a 2005 Trailblazer EXT 4wd. I have an issue with my front driveshaft. I have been hearing a squeaking in a tin can kind of sound. It is kind of hard to describe. I thought front brakes. Checked them and they are fine. I crawled up under the front end and took off the skid shield to look around. Since it was in 2wd I tried to turn the front driveshaft by hand and there was the sound. The driveshaft does turn and the sound was appearing to come from the front diff.
I thought "Oh Crap" is there fluid in the front diff. It would make sense if it was empty to make a sound like this. I unscrewed the filler hole and there was fluid. Then I decided to flush and fill the front diff with fresh fluid. It was pretty dark and I don't know when the last time the front diff was serviced. I took it out for test drive and still have the noise. What i am asking now is what to look for next? Like I said, when turning the front driveshaft by hand in 2wd it makes that sound.
By the way, 4wd works just fine in all modes.
Avalon 2005-12 :: Squeaking Noise Come Back And Disappear Again
My car has been doing that on and off for a while. Sometimes it can go without that annoying squeak for a month or so, then come back and disappear again. There is nothing like it would only do that on high/low rpms or when the AC is turned on for example. The noise just comes whenever it wants to. Today I had a chance to capture it.
Here is a short video ; [URL] ....
I was trying to listen to the bearings with mechanic's stethoscope and it seems that the tensioner is the loudest one. But if that bearing was bad it would make the noise all the time..
Toyota - Echo :: 2005 - Squeaking Noise At Startup And At Low Speed
Need to diagnostic the noise coming from my Echo 2005? 70K miles. I took to the dealer twice and spend a total of 500$ but the noise still there. The dealer changed the drive belt , new brake pad and clean the rear drum and adjustment. The noise occurred at start up and sometime at low speed below 10mph. The noise increase then stops after 6 second. [URL] .....
View 10 RepliesDodge - Ram1500 :: 2005 - Squeaking Noise When Press Down On Gas Pedal And Accelerate
Truck is a 2005 Dodge Ram 1500 Quad Cab, 2 wheel drive, automatic transmission. When I press down on the gas pedal and accelerate, an audible squeaking noise is made in the rear of the truck. It sounds like it is coming from somewhere near the rear axle or wheels. The sound is a high pitched metallic squeak, as if metal parts are rubbing against each other. The noise only occurs when I am accelerating. While accelerating, if i momentarily take my foot off the gas pedal, the noise stops. Also, once a constant steady speed has been reached the noise stops. Also, the truck makes the same noise when accelerating in reverse.
View 5 RepliesFord F-150 (2004-2008) :: 2005 V8 - Squeaking Noise When Turn The Wheel
I have a 2005 Ford F-150 with a 5.4L V8 engine. Few months ago I started getting this squeaking noise coming from the front tires when I turn the wheel. I took it to the mechanic and he said the ball joints need to be replaced. Do you think it's the only reason why this is happening? If not, what else? The noise is pretty bad and the ball joints have never been replaced before.
View 1 RepliesYukon :: 2005 XL AC Started Blowing Hot Air Even Though Set To Cold
I have a 2005 Yukon XL. In Oct 2010, my front A/C started blowing hot air even though it was set to cold. Nothing has happened since then, except that about a month ago, the A/C in the front stopped working but the A/C in the back still works great. The one in the front works when it wants to (once or twice in a week) and when it does, there is cold air coming out of it. We live in FL so it is getting pretty hot to not have A/C and we are going on vacation soon. What can be causing my A/C to work like this?
View 1 RepliesGmc - Yukon :: 2005 - Rough Running Between 1300 - 1700 RPM
My 2005 yukon runs rough between 1300-1700 rpm, seems to run fine at all other rev's, doesn't matter what gear I'm in, (trying to troubleshoot put in low to see what it would do, same problem) if it's in the rough zone and I punch it it smooths out and runs fine, I've tried injector cleaner (Techron), premium gas, but it still does it....
View 2 RepliesYukon :: 2005 Denali XL / Driver Side Low Beam Not Working?
I have a 2005 Yukon Denali XL. The low beam headlight on the driver's side will not work. I replaced the bulb. Still won't come on. We had just driven the truck up the Dalton highway (The rough road seen on Ice Road Truckers).The passenger side low beam works fine, and all the other lights work fine.
View 1 RepliesYukon :: 2005 - Transmission Stay In Lower Gear On Highway
My transmission seems to stay in lower gear than needed on highway. Tach speeds are 2500 @ 55 and closer to 3000 @60-65. Is this normal?
View 5 RepliesMazda - Transmissions - Mazda6 :: 2005 - Soft Scratching Noise When Accelerating
I have had this car for 4 years, and it's been driving, and handling very well overall. Lately, I started hearing a soft scratching noise when accelerating, and especially going from 1st to 2nd, and 2nd to 3rd gear. There was some hesitation before shifting to the higher gear as well. I took the car to a local mechanic, and after test driving, and listening to the engine with a tube??? he told me that he needed to change the torque converter and the pump, and quoted me for $1936. My wife immediately wanted to sell the car and buy a new one. Half of my friends said the same thing (well, at least my richer friends did), and the others said to fix it and drive it while I could do so.
So, I took the car to another transmission specialist, and they told me that the transmission was in great condition, fluids, shifting, etc. Something doesn't add up here. I know that the engine/transmission doesn't sound the same as when I bought the car, but how is it possible to have that kind of diametrically opposite diagnosis. Meanwhile, I took the Mazda to a local dealership, and they quoted me for $4500 trade-in value, while CARMAX said they would give me $2500. Needless to say, I am at a crossroad - we know we have to change the car soon, but how soon and under what circumstances, this is the question. Then, just today, another mechanic said that the engine is unbalanced, and is giving a low, and powerful vibration, and the harmonic balancer needed to be changed.
Avalon 2005-12 :: 2007 - Rotary Noise While Coming To Stop And Lightly Accelerating
The other day I noticed that my '07 avalon was making some new noises. It's most noticeable once I get up about 15-20 mph and then very little touch the accelerator. It's sort of rotary noise that seems to be tied to the engine speed. Kind of like something rubbing that wasn't before. I also notice it when coming to a stop, foot of the accelerator, just braking the noise slows down. It seems even a bit louder when stopping.
View 3 RepliesHyundai - Sonata :: 2005 V6 - Creaking Noise From Left Front When Accelerating From A Dead Stop
This auto has 143,000 miles on it. I recenty noticed a creaking noise from the left front when accelerating from a dead stop. The shop I have used for 15 years said that the motor mounts are deteriorating and should be replaced. I trust the guy but would like to avoid the $1,400 repair. There are no symptoms other than the ocassional noise.
What is the downside of ignoring his recommendation? What other symptoms can I expect if I delay the repair? Can this be a serious safety issue? I plan to keep the car for another two years unless I bite the dust first or the engine falls out.
Ford 6.0L Power Stroke Diesel :: 2005 - Hissing Noise When Accelerating - Lost Turbo?
I have a 2005 F250 with 186K miles. I do minor work on my vehicles but have little experience working on my diesel. I was accelerating when I heard a pop and a hiss similar to disconnecting an air hose from an air compressor. Total loss of turbo power. No turbo reading on the turbo gauge on dash. No loss of oil. No smoke. Oil and coolant look fine. Took off turbo and everything appeared to operate like it should (according to YouTube videos). Inspected lines and rubber boots.
Rubber has some cracks but not certain if they are holes. How small/large of a hole would cause total loss? Was originally scared to take it to a shop knowing they could name their price. Not opposed to taking it somewhere now knowing the turbo works but obviously would rather save the money. Any tips on troubleshooting? I'm not opposed to proactively replacing parts/sensors as the truck has given me 186k and I plan to keep it as long as possible.
Ford Escape / Hybrid :: 2005 - Clunk Noise On Front End When Braking Or Accelerating And Turning Wheels
2005 2.3Liter 4wd Mariner, 225k miles
I have been experiencing clunk noise on the front end when braking or accelerating and turning wheels.
I have replaced: front control arms, ball joints, tie rod ends, sway bar bushings and stabilizer links and 2 days ago I replaced strut mounts and bearings.
The steering is smooth after the strut mounts replaced but I can still hear cluck noise mostly on left now when going over bumps, braking and accelerating.
Car also has new engine/trans mounts.
I am so lost right now because I cannot figure out what is it. The only thing I didn't replace are the struts but the I test them and they seem to function fine.
Jeep - Liberty :: 2012 - Squeaking From Under The Hood When Accelerating - Brake Caliper Slide?
I recently had a dealership mechanic check out a couple of annoying noises my 2012 Jeep Liberty had been making for a few months. The one that really bothers me is a squeak coming from under the hood. It squeaks pretty constantly when I'm accelerating at all, only stops when I brake. Now, I'm totally clueless about cars and I realize how easy it would be for me to be taken advantage of, but I don't want to be bitchy to the guys fixing my car. I was told this squeak is the brake caliper slide so I told them to go ahead and fix it. The guy comes back 3 hours later (had to order the part) and says he's replaced the part and did all he could but it still squeaks. Am I being jerked around? Should I just take it elsewhere for a second opinion?
View 11 RepliesElantra MD (2010-15) :: Driver Seat Started Squeaking When Stopping / Accelerating And Going Around Curves
I've had 2013 Elantra for a month. Love it, but a week ago, the driver's seat started squeaking when stopping, accelerating, and going around curves. Crazy making! I took the car in today. Svc mgr said its a weight issue. The two driver/owners weigh 150 and 160 lbs! Exactly, he said. Apparently, we do not weigh enough to prevent squeak. The only fix would be to replace the seat and there's no guarantee it would work. Also must be approved by regional svc mgr so have to go back in a.m. Told them similar issues posted online (Genesis and Sonata) and was easily resolved lubricant issue. They could at least try what appears to work. No going.
Have other Elantra owners experienced this squeaking? If Hyundai knows this is a recurring issue with their products, at what point do they make engineering changes to resolve the issue? Don't want to, but I am rapidly losing my love for the car as it sounds like a cheap tin can when it squeaks.
Yukon :: 2001 Denali AWD 6.0 - Whining Noise During Acceleration
Ok I have a 2001 Denali AWD 6.0, and when I accelerate it makes a whining noise as if it were low on power steering fluid, well I just replaced the power steering pump today and the ring and pinion with bearings about 1000 miles ago. Still whining, the shop today said it could be transferred case but I doubt that because I had it inspected when the ring and pinion was replaced.
View 14 Replies