Toyota - 4Runner :: Low Brake Pedal After New Pads And Bleeding?
A 2000 Toyota 4Runner was stopping fine. A mechanic informed me that the brake pads were worn down. After the pads were replaced and bled the pedal sinks lower than before and the car requires more pressure to stop. I can pump up the pedal after 3 pushes. I took it back and he has since re-bled the brakes but the pedal still sinks low.
View 15 RepliesTiguan :: 2009 - Brake Squeal / Replacement Of Pads?
Second time my Tiggy is going back - first time I was told to speed up to 50 or 60 MPH and slam on the brakes and that appeared to work for a while, but now, I feel like the neighbors are going to file a noise complaint on my brakes!
There was mention of a TSB - just wanting to see how to be able to get that number and if there was any other solution, minus the replacement of pads as they have plenty of meat on them still.
Lexus GS 2006-11 :: New Brake Pads Click And Squeal When Shifting Car Forward Or Backward
I bought Akebono cermaic pads for my GS 350 AWD which I thought were high quality good fitment pads as they even advertise them on tirerack. Now I am not really impressed. After about a month every time I pull out of my garage in the morning they click and squeal (squeak).
The scenario: After I come home from work at night I pull into my driveway and park in the garage. The pads are already seated in the forward position from driveing forward and parking. Then in the morning I go and back up in reverse to pull out, I tap the brakes to stop and shift into drive to pull forward; at the moment I depress the break pedal the two front rotors simultaneously click and sometimes squeal. Sometimes when I get in my car at the transit center in front of everyone this happens.
Is there a shim kit or something I can add to the brake pads to sit in between the pads and rotors to get them to stop moving. I know that there not moving a lot but whatever play they have is causing me brake pad buyers remorse.
I went with these Akebono ceramic because they dust much less then stock semi-metallic pads. Becuase I had them on my Audi and they didnt dust nearly as much as the stock set. But once and while they too would click in this situation but nearly as much as now in my Lex.
Toyota - Avalon :: Brake Noise When Backing Out Of Driveway In The Morning
After having rear disc pads replaced, my 2003 Toyota Avalon makes a terrible noise backing out of the driveway in the morning. I think it must be rust or something--it never happens in ultra-dry weather. It is a very loud squeaking and moaning. It only happens backing up, and it goes away after a bit of driving. Normally I would not worry about what is likely a bit of surface rust, but this is INTENSE. Like, the neighbors across the street stare at us. Should I worry about this, or just live with it since the brakes perform fine after this initial period?
View 1 RepliesToyota - 4runner :: Brake Failure In Cold Weather
My son and I were coming down the mountain on I-70 near Georgetown, Colorado in a snowstorm in his toyota 4runner. We had just gone through the Eisenhower Tunnel. There was alot of traffic, and driving conditions were terrible. We were traveling approximately 10 miles per hour when my son told me that his brakes were not working. We downshifted, and then slid into the guardrail on the median (we were in the left lane). Luckily we were not hurt, and we did not hit anyone else. Once the car was towed back to Denver, the brakes worked again. My son is getting the car checked by a mechanic, but why the brakes gave out and how he can avoid that happening in the future? Was it related to the cold weather (approximate 10 degrees)? I did not feel that he was riding the brakes as we descended. The road was icy at the time.
View 19 RepliesHyundai - Tucson :: 2006 Shuts Off Sometimes When Pull Into Driveway
2006 Tucson shuts off sometimes when I pull into my driveway. It starts right back up and it doesn't happen all the time. I have replaced the cam and crank shaft sensors with no luck.
View 6 RepliesToyota - 4Runner :: Master Cylinder Leaking Brake Fluid
My 2003 Toyota 4 Runner with 104K miles recently started showing a brake light off and on. The brake fluid reservoir was at the minimum level and there was some residue leaking from the bottom near a silver disc. Took it to a mechanic and was told it was most likely the master cylinder leaking brake fluid. Is this normal wear and tear or is it unusual in this vintage vehicle? I do not notice any brake slippage at this point. Should I take this to the dealer and ask why this master cylinder is faulty? I thought Toyotas were long life vehicles?
View 2 RepliesToyota - 4runner :: Steering Wheel Turns A Little Bit When Pedal The Brake
I have my Toyota 2000 4 Runners having a slightly problem. When I paddle the brake at the Stop or traffic light, the wheel turns (mostly anti-clockwise) a little bit like 10 to 20 degrees. It doesn't turn all the time but especailly when the car is going slightly downhill such as when I paddle the brake and stop from parking lot onto the main road. The road is a little dip down or sometimes in front of the traffic light and it was slightly inclined. I don't know if this normal or not.
View 7 RepliesToyota - 4runner :: 1988 - Surging Up And Down At A Stop With Foot On Brake
My car has about 180K miles on it and it's a manual transmission. It's a champ, and I love it. But sometimes when you first drive it ( not sure if it's only when the weather is cold, but I don't think so) if you are sitting at a stop with your foot on the brake then engine surges up and down, if you take your foot off the brake it stops.
View 3 RepliesPrius (2004-09) :: Noise While Going Over Bump When Pull Into Parking Lot Or Driveway
Just bought an 06 with 79k miles... overall in great condition, but when I pull into a parking lot or my driveway or anywhere that has a bump there is a noise... sounds maybe like a strut or shock... is this a common noise as we near 100k miles???
View 7 RepliesToyota - 4runner :: Passenger Side Rear Brake Light Only Works When Lights Are Off
Passenger side rear brake light works when lights are off, but does not when lights are on. In looking at both lights while on, the passenger side seems to burn much dimmer than the driver side.
View 4 RepliesToyota - Camry :: Front Pads Started Making Noise On Brake Application
05 Camry, 2.4L, 47K. Replaced the front brake pads two months ago. I put in Akebono pads and did nothing with the rotors as the original pads were not completely worn out and there is no vibration whatsoever in the pedal.
The pads have recently started making noise on brake application. I'm getting ready to take them back apart and re-lube everything. Should I take some sandpaper to the pads & rotors to knock off any glazing? Do I hit it with a course or fine grit? I have not had this problem happen in the past and was thinking that maybe it is the quality of the pads but I believe these are oem...
Ford 7.3L Power Stroke (1999-2003) :: Steering Will Whine Only In The Morning When Pull Out Of The Driveway
So when driving my tuck the steering on it would sorta lock up like it wanted to push the truck to one side then it would free up and the steering would be real loose it just felt like it had no power steering to one side it's not the same side each time and it pulses when I'm at a stop if I move the the tires Erving the motor doesn't seem to work so far I have replaced ball joints and all tie rods they needed done anyways it would still do it got an alignment done last week and it almost seems worse now could just be coincidence.
I'm thinking power steering pump but when the steering locks up to one side I'm also wondering if it's the steering box it's kinda hard to explain it what's going on and there is no popping noise or anything when the steering frees up. It's kinda scary on the freeway when I go around a corner the steering gets real loose and wonders back and forth not all the time but quit a bit but when going strait it will feel like it wants to pull to one side then the steering will loosen up again. The steering will wine only first thing in the morning when I pull out of the driveway then it's fine
Lexus IS 2014+ :: Brakes Started To Squeal When Coming Down From Driveway
I had my 350 for about 5-6 months? Started two months ago when the brakes started to squeal coming down from my driveway and sometimes when I release the brake at a light. First I thought it was because of the cold but it started to get warmer and the problem is still here.
View 5 RepliesToyota - Tacoma :: Front Disc Brake Squeal - Loud Sound Like A Rock In A Caliper
I own an '05 Prerunner with 56k miles. Had the front pads replaced and turned the rotors last Spring.
Now, after sitting for awhile, as I back up the front brakes squeal. (Sounds like a rock in a caliper its so loud.)
Toyota has a TSB to fix this.
Prius (2004-09) :: 3 Brake Dash Warning Lights Came On After Got New Brake Pads / Rotors
i have the brake (!) the ABS and the VSC lit up after i got new bearings and new brake pads and rotors, the car was also stalling before the mechanic removed these bearing "dust cover" circles that must have been causing speed sensor interfernce bc the spedometer was stuck on 0....so the car seems to be done stalling after those were removed and all the big lights went off then i hit the brakes a few miles later and those three lights came on...
View 2 RepliesLexus IS 2014+ :: Front Brake Pads Touching The Rotors / E-Brake Engaged And In Park
I noticed the front brake pads were touching the rotors when I was painting the brake calipers. I had my e-brake engaged and in park. I'm assuming the e-brake only brakes the rear wheels because the front rotors were still movable. Although the car still rides fine but I'm not sure if this is normal.
View 1 RepliesPassat (B6) :: E-Brake Won't Release When Change Brake Pads?
Having issues with the auto-ebrake? My friend has a 09 passat with the push button ebrake. He was changing his brake pads when his ebrake will not release. He was told by VW to not use a c-clamp to depress them as they would mess up the sensors or something along those lines.
View 14 RepliesFord Excursion :: Brake Pad Bedding / Slight Brake Squeal
I replaced my front pads/rotors after the dealership suggested same. I went with NAPA Ultra Premium rotors and Hawk LTS pads. I applied the high temp brake grease to the pad ends and shims, but forgot to install the two "V" spring clamps on the left front pads. The sliding caliper bolts seemed free, but I didn't clean them (I should have and will do so if I tear the brakes back down). I bedded the pads by doing 30mph to almost stops 3 or 4 times then 45mph to almost stops 1 or 2 times...not sure if that was enough based on reading other posts on how to bed.
I now have a slight squeal and not sure if it's due to a lack of those V clamps or if I didn't bed the pads correctly or other. Thoughts? Can the pads be "re-bed" if I boofed it up the first time? I'm about to do the rear rotors/pads and want to do it right.
The X stops OK, but I thought it would be more aggressive than it is with the pad/rotor combo I installed. I tow a ~8,000# TT and want good stopping power.