Saturn - Ion :: Brakes Make A Squeaky Sound Every Time When Pressed
I recently crossed 21 K miles in my Saturn. The brakes make a squeaky sound every time I press them. Is this a sign that the brakes need to be replaced?
View 5 RepliesPrius (2004-09) :: Brakes Squeak / Hiccup If Pressed Deeply And Released?
Is it normal for the Prius's brakes to make a low-pitched squeak (kind of like something wet rubbing against something, or a burp), when I press it semi-deeply and release? The only reason I'm worrying is that I ran over a camouflaged flat metal object on the road today while changing lanes, and it could've weighed anywhere from a soda can to a heavy shovel -- it clunked against the bottom of my car loudly, then got propelled into the air and barely missed a car behind me. It seems trivial but I'm paranoid because I just got the car (used, great condition) and that happened on my first day. I don't remember if it was squeaking before the shovel incident. My girlfriend says her 3rd gen prius does it too but I have yet to verify it.
View 5 RepliesPrius (2010-12) :: 2015 - Solid Brief Single Click When Brake Pedal Pressed / Released
We have a new 2015 Prius with 6k on it and we are noticing one solid brief single click when the brake pedal is pressed and/or released. It doesn't happen every time (just some of the time) but it is only noticeable at slow speeds.
View 19 RepliesPrius (Gen 3) :: Loud Creaking Noise When Brake Pedal Is Pushed And Released
I traded my 2007 Prius for the 2010 III Prius on 5/30. I had 5 wonderful days with it and on the 6th day, it started.
There is a loud creaking noise when the brake pedal is pushed and released.
The dealership contacted Toyota and did everything that was suggested to correct the problem and no luck.
Ford 7.3L Power Stroke (1999-2003) :: F350 Stalling When Accelerator Pedal Is Pressed And Released
I have an issue with my 1999 Ford F350 7.3L diesel and stalling when the accelerator pedal is pressed and released.
Background: Initially the truck would not start, and from there here are all the things that I found wrong and replaced. (keep in mind that I troubleshot all the issues and every part that was replaced was proven faulty)... Starting with the glow plugs, all but 3 were faulty and not making a connection to ground. (only one broke off in the head, but I was able to get it out with out getting anything in the cyl)..
Valve cover gasket and harnesses, this is to include replacing the connectors on the engine harness cause both sides of the connectors were broken. The ICP was leaking into the connector and breaking the connection to the PCM, so the connector was cleaned and the sensor replaced. No issues from that now.
The IPR was replaced cause the oil pressure was erratic and not stable when I had my pressure gauge hooked up testing the pressure. After that was replaced the pressure was ok, and it climbed with RPM's and fell back down like it was suppose to. I could not get the PSI up to 3000 PSI even at full RPM's, but it did not drop past 600 psi.
The fuel tank was recently replaced, and all the fuel was removed and "fresh/good" fuel was put in. The fuel bowl was cleaned out and the filter replaced. (the fuel bowl did have a lot of crap in it like rust and dirt). Fuel pressure was at 95 PSI last time I checked, which is higher than the recommended 60 to 65 PSI.
That being said the engine did start and run, but was very rough and missing. So I did all the injector o-rings. Some o-rings were starting to split, and others were not sealing like the copper washer on the injector tip. I could tell by the amount of crap in the end of the injector. ( not the tip, but where the injector contacts the injector cup. There must have been water in there or something cause that part had all kinds of crap around it)
The engine smoothed out after a couple day of running it, but it would still stall when it was cold. The block heater was replaced cause it was falling out. The oil was changed and the filter too. The CMP sensor was changed just because I know they will cause the engine not to start. I had a "known good" truck that I can swap part to and from, and I did a lot of that thus far.
Swapped the IDM, PCM, EBP sensor, MAP sensor, all relays inside the engine and in the cab. I was looking for the barometric pressure sensor, but from what I have read thus far that is a calculation in the PCM between the MAP and the EBP sensors. The diode to the PCM is good,I checked the harness for rubbing by the 42 pin connector and by the LF fender but I did not find any chaffing or rubbing on any wires. The ECPR was wired together, so I fixed it so that it is no longer that way, and the waste gate for the turbo was wired open. I took the wire off and made sure the linkage worked and it did move. I tried to lube up the valve in the turbo for back pressure, but I'm not sure if it worked or not.
I also swapped out the oil pressure sensor and the oil pressure temp sensor on the HPOP Reservoir, and blew out the EBP sensors tube. (air went straight through the tube with no restrictions.) I did a buzz test and all the coils checked out ok. I also did a contribution test and only three cylinders were identified as having some kind of issue. (but this is not enough to cause the engine to stall..) The only current codes that I have are the air intake heater, and the EF feedback not detected. Neither of which would cause the engine to stall in my opinion.
Symptoms:
When cold: The engine will start and idle just fine, but when the accelerator is pressed and held to 1000 RPM's the engine will sputter like its missing and surge up and down between 500 and 1100 RPM's. If the accelerator pedal is pressed quickly the engine speed to increase then fall down and stall. It seems as if the PCM is shutting down and starting back up. ( Like the key is turned off and then back on quickly, but the engine doesn't recover)
When warming: This issue becomes more erratic, but when hot the engine is fine. No issues, and it will drive all day long with no hesitation.
The truck has over 200K on it, but I know it will go more! It is a mannuel tranny, and is a 4X4, and I love it, I can't get ride of it just yet.
Sonata I45 (YF - 2011+) :: Creaking When Letting Up On Brake Pedal Slowly / Lightly
Had this issue with my Kia Optima 2013 pertaining to the brake pedal, now with my 14 Sonata Limited. When in stop and go traffic, parking lot driving, or pulling into the garage that requires a lighter touch on the brake pedal, the pedal has a creaking feel to it, like when closing a creaky door. I can make this happen of course when I push the brake pedal slowly with my hand. This also happens when letting up on the pedal slowly/lightly. Kind of annoying, but the brakes work just fine and dandy
View 3 RepliesSonata I45 (YF - 2011+) :: Parking Brake Creaking Sound
My vehicle: 2013 Sonata Limited - 4500 mi. When I park on an incline, set the parking brake then release the foot brake, hear a 'creaking' noise from rear. Dealer says "it's normal and nothing can be done" ? I don't think so...
View 6 RepliesAccent RB (2012+) :: Crunch Sound When Applying Brakes
I haven't noticed it before but applying the brakes after driving thru snow I get an awful crunch sound. I have stopped the car a few times to look and it appears the wheel wells are clogged with slush but I don't know if that's whats causing it. After the crunching sound if I'm driving on a clear road there is no noise if I brake. Its much worse than say the crunch you get if the brakes are wet. Whats up with this?
View 3 RepliesSonata I45 (YF - 2011+) :: 2013 - Clunk Sound When Braking And Make Full Stop
Just bought my new ride last week and already noticed strange clunk sound when braking. It doesn't happen all the time but seems to happen when I make full stop, like at a stop sign or stop before turning.
View 1 RepliesSonata I45 (YF - 2011+) :: Cruise Control Will Not Go On And Creaking Sound In Sunroof Area
2012 Sonata Limited... I purchased my car in November of 2011. It had allegedly been driven for 5500 miles by a salesperson at the dealership.
Within a week, both my husband and I noticed that the cruise control would simply not go on every once in a while. The dealer claims to have taken apart the cruise control, looking for problems, but says there are no problems; that I should come back in after docummenting problems more specifically.
I also continue to hear the creaking noise in the sun-roof area. Allegedly, the Body Shop adjusted the headliner clips, but I still hear creaking.
I am most concerned with the cruise control, but annoyed at the dealer for keeping my car for over two weeks and having achieved nothing. I like the car, but this kind of a start with it makes me want to sell it and go get either another Honda or a used Volvo.
Sonata I45 (LF 2015+) :: Shakes / Stutters / Hesitates When Brake Pedal Is Released
My aunt recently purchased a new 2016 sonata trim is se, I believe its the base model version, I test drove her car after she bought it home from the dealer and noticed right away that when I release the brake pedal from a dead stop, foot off the brake but not on the gas pedal yet, the engine hesitates / shakes. This happens most of the time but not all of the time. I noticed this when the car had only 100 miles on it...is this a Hyundai feature?
View 49 RepliesHonda - Accord :: 1999 - Engine Dies When Pedal Pressed Down / Revs And Then Quits When Pedal Is Pressed Slowly
Ok, did an intake manifold cleaning on my 99 Accord the other day, and now I have problems...
Long story short, some time ago my car started to have a very rough idle. Took me awhile to find the problem. Turned out the air hose, between the filter and throttle body, had developed a big hole on the underside. So I replaced it and while I was at it used some throttle body cleaner, spraying into the intake manifold chamber. Lot of junk blew out the tailpipe. The car ran much better, but the idle could still be a little rough. I ran it that way for awhile, and finally the other day decided there was probably still some junk in there and it was time to really clean it out. So I took ff the throttle body and intake manifold housing. There was a lot of junk in there! The small intake on the passenger side was completely clogged shut. (I understand this isn't surprising on these cars.) I used a bunch of rags and 2 cans of Valvoline throttle body cleaner and a lot of elbow grease and cleaned it out. I was thinking to myself that whatever I didn't get with the rags flushed through OK, but I didn't want to take the whole intake manifold out.
So I put it all back together. (I took a video before I started, so I'm pretty sure it's all back together right.) But now I have problems. The car starts. It idles fine mostly, but can be a bit rough. But the trouble starts when I put the pedal down. If I do it in Park, well, if I push it quick the engine just dies. If I push it slow, the engine revs then quits, revs and quits, over and over. Similar if it's in gear. If I push it hard, the engine stalls. If I push it gentle, it revs up, but chugs along a bit.
I've run some seafoam through it, thinking it was clogged up with all that junk, and sure enough, lots of smoke comes out, but nothing is improving so far. What have I done wrong?
Santa Fe (CM - 2007-12) :: Brake Pedal Bounces Back With Sound When Released Too Fast
When I release the brake pedal too fast, the brake pedal bounces back with sound which is a little bit loud to me. I feel the sound is from the spring if there's one. It's annoying so I have to remove my foot from the brake very slowly. Is it normal?
View 20 RepliesPrius (2001-03) :: Only Rear Brakes Engage When Pedal Pressed
I purchased a 2001 Prius with 123K miles about two weeks ago. I knew the HV battery was shot when i purchased it. I decided to see if I could rebuild the HV battery on my own.
I'm very mechanical but not the brightest bulb in the room when it comes to batteries and anything electrical.
So here is where I'm at so far:
- I removed the HV battery.
- safely rested it on 2 horses (I used horses because it would give me easy access to the bottom to remove the bottom screws)
- Removed all 38 modules from the battery pack
- cleaned the busses in vinegar
- inspected each wire that connects between buss and the nut.
- tested each battery ( one of the batteries tested at -0.1, the others tested at 6.8)
- I don't know how to load test the modules, so I couldn't tell if they would drop dramatically under load, so I ordered 38 used replacement batteries off of Ebay. (Gen II)
- these replacement modules were about a half inch longer than my original modules.
- The replacement modules arrived. I cleaned the terminals, tested each one and installed them.
- Connected the battery back into the prius.
- Installed new 12V battery from the Toyota dealer.
- The Prius started right up.
- Drove it around for the first time for about 10 minutes.
- When i was driving it, the monitor in the Prius would show the engine running most of the time but sometimes it would show it charging the HV and other times charging the 12V. the engine would shut off at stop lights and resume when I pressed on the gas pedal.
- while driving back into my driveway, all of the warning lights came on and the battery fan kicked into high gear,
- I can't remember the code I pulled but it was in reference to the cells being out of balance I think. I'll have to check it again tonight when I get home.
- I removed the HV and tightened the nuts around the busses hoping the issue would be resolved.
- I was able to drive it only a few minutes before the issue returned.
other issues I noticed.
While waiting for the replacement batteries to arrive, I did the following:
- changed the cabin filter
- did an oil change.
- changed the tranny fluid and removed the tranny pan to clean out the slime and clean off the magnet.)
- changed the rear brake shoes.
- changed the front brake rotors and pads. ( they were in awful condition due to sitting so long)
***when I pressed on the brakes, only the rear brakes seem to engage, not the front. I never attempted to bleed them because I know only the dealer can do that)
Passat (B5) :: Brakes Seized On The Freeway - Pedal Barely Go Down When Pressed
This morning my brakes seized up on me on the freeway. I noticed it when I pressed the brake pedal and I it would barely go down. Then, I could smell the brakes. I pulled over and there was a strong smell from the brakes and I couldn't press the brake peddle down any. I waited a while and let the brakes cool off and then they were fine. I got the rear brakes replaced at the dealership earlier this year.
View 5 RepliesSonata I45 (YF - 2011+) :: Creak Sound When Giving Gas Or Putting On Brakes?
Sounds like it's coming from the gray plastic that's attached to the center console.
View 5 RepliesLexus GX 2004-09 :: GX470 - No Beep Sound For Voice Command / Thump When Brakes Released
I just bought my mother's 2004 GX470 and I tried the voice command button on the steering wheel but no beep sounds and nothing happens. I tried looking up the information in the manual and seems like I'm doing everything right.
Second, when I brake I feel a thump as I release from the brakes, is that normal?
Sonata I45 (YF - 2011+) :: Brakes Dragging Sound Coming From Passenger Side Mainly When Car Is Cold
I have a 2011 Sonata with 40k miles and am hearing what sounds like a dragging ... medal touching medal .... brakes dragging sound coming from the passenger side mainly when the car is cold. Could this be a possible wheel bearing going out???
the car is lowered about an 1.5 inches and and sit on a staggered wheel set. 18x8.5 up front and 18x9.5 in the rear. Just want to know if I should be worried.
Hyundai - Tucson :: 2011 - Gas Pedal Doesn't Always Make The Car Go
When I'm cruising along in my 2011 Hyundai Tucson and lift my foot off the gas to slow down, then give it gas again, the rpms rev but the car acts as if it's in neutral for a couple of seconds...It doesn't speed up. This is intermittent but becoming more frequent. What's up with that?
View 2 Replies