Prius (2004-09) :: Clucking Noise From Near Front Driver Side Wheel - Replace Wheel Bearings?
My 2005 Prius has 95k miles on it. I've been hearing a cluck-cluck-cluck noise from near the front driver side wheel. I had an independent mechanic test drive it, who said the wheel bearing needs replacement. Should I have it checked out by a Toyota dealer? They're so much more expensive, but are is it worth taking it to them?
View 15 RepliesAvalon 2005-12 :: Noise Coming From Front Left Tire - Front Wheel Bearings Replacement?
I've been having a lot of noise coming from the front left tire, and I finally had it diagnosed as a bad wheel bearing today.
I noticed that the front wheel bearings are sold individually while the rear wheel bearings are sold as hub assemblies. Is there a certain way that the front wheel bearings have to be removed and pressed on? I'm trying to see if this is a DIY repair.
Ford F-150 (2004-2008) :: Roaring Noise Coming From Right Front While Turning - Front Wheel Bearings?
I gotta a roaring noise coming from my right front while turning. Planning on replacing just the wheel bearings tomorrow & not the whole hub assembly(2008 2wd). Is there a thread that lays out the steps and other parts I may need? I've seen alot different stories on the net on how to do it. Everthing from I can press new bearings to I have to do 4x4 hub conversion. Seems to be some confusion.
View 2 RepliesSonata I45 (YF - 2011+) :: 2013 - Front End Clunking Noise Over Bumps
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
Sonata I45 (YF - 2011+) :: 2013 - Vibration From Front Of Car - Interior Fan Noise?
Heard wicked vibration from front of car (almost like I hit something and it jammed under car) pulled over to realize sound was still there when stopped. after a few seconds realized it was the fan running (on setting 4) now a couple days later sound isn't as bad but still vibrating, doesn't matter where it's blowing (feet, chest, windshield). I bought sonata 20 months ago and has just under 23000 miles...
View 8 RepliesPrius (2010-12) :: Variable Front End Noise / Bad Wheel Bearings
Our 2011 w/140,000 miles has a variable front end noise that I suspect from past experience with other vehicles is a bad wheel bearing. I've seen posts of the procedure for replacing the Gen 2 bearings that requires the hub and bearing be pressed out and new bearing back in which would limit the DIY'er, but looking at the replacement parts diagram for the Gen 3, it appears that the hub and bearing unit is bolted in with 4 bolts and may not need a hydraulic press to install.
View 4 RepliesFord F-150 (2009-2014) :: 2012 XLT 2WD - Front Wheel Bearings Making Noise
Front wheel bearings making noise. Can I buy replacement bearings/races/seals, or must i buy a whole new hub front assembly?
View 3 RepliesSonata I45 (YF - 2011+) :: Getting Increasingly Louder Noise Originating In Left Front Wheel
So I've been getting on increasingly louder noise that's originating in the left front wheel. It sounds like you're driving over road patches (rough spots). It does it worse when shifting the weight to that wheel by taking a right curve. I rotated wheel front to back no change. Brakes look ok. I was thinking wheel bearing but I have no play when I check it. Also it sounds like a general bearing rotation whine that matches road speed.
View 2 RepliesSonata I45 (YF - 2011+) :: 2013 - Knocking Out Sound When Turning Steering Wheel
Vehicle: 2013 Hyundai GLS @ 36k miles.
When my vehicle is stopped or in motion at low speed, if I turn the steering wheel, I hear a knocking out at the sound towards the front of the vehicle. How concern should I be?
Sonata I45 (YF - 2011+) :: 2013 - Rubber Gasket / Band Popped Out Of Steering Wheel
My wife and I were on a road trip today about 120 miles from home. During some city driving I noticed a rubber band popped out from just above and behind the steering wheel airbag cover. I had no choice but to continue driving and as I steered through some turns I noticed it not only came out more and more but then started to get twisted up around the steering column. We were able to make it all the way home without an issue but the steering wheel is making a noise due to the rubber band/gasket whatever the heck it is which is now all twisted up behind the wheel, however I am unable to see it anymore.
I am not going to drive the car until I am able to get it in next week to the dealer and my car only has 7000 miles on it, it's a 2013 Sonata GLS.
I know it will all be covered under warranty but my biggest concern now is making sure the dealer is able to hear what I am able to hear since the rubber thing is no longer visible.
Sierra :: 1984 K2500 4WD - Front Wheel Bearings Loose
1984 K2500 4WD 8-lug
Front DS wheel hub. The front wheel bearing nuts come loose all the time. I have to check it every weekend, usually starts to get loose after a week and I have to pull apart the hub and re-tighten the nuts. Bearings are all okay, but tires wobble when they get loose...
Reverse order of install: nut -> keyed washer -> nut -> washer -> snap ring -> 4wd auto engaging assembly -> spring seat -> cap seal -> spring -> cap
My understanding is the deepest nut gets adjusted so that the bearing is tight enough that nothing wobbles but not so tight the wheel can't freely spin. Then the keyed spacer goes in and the second nut is tightened down hard to lock the first nut in position.
I've had on-and-off issues with the front DS in general as well. That side the brake caliper always start to suck in air after a few months, on #4 now. Brake system has been replaced with rebuilt MC & calipers, all new lines and warning switch. Also the 4WD doesn't seem to lock in on that hub every time. It will engage, but doesn't hold if it gets too much torque. Then other times it engages and locks and won't have any problems until next time I want to use it. It works about 70% of the time. I've taken it apart and checked everything, no burrs or wear that I've noticed to cause it.
Passat (B5) :: Grumble At Speeds Over 40 MPH - Front Wheel Bearings Replacement
Replacing front wheel bearings on my 99 Passat? There is a gentle 'wahwahwah' grumble at speeds over 40mph. The car has done 130,000 miles and is otherwise in nice condition.
View 3 RepliesFord F-150 - 1997-2003 :: Sloppy Front Wheel Bearings
In 30 years of wrenching on cars, I've never encountered this problem. Replaced the pads and left rotor. Rotor is typical Chinese rotor. While there, replaced the wheel bearings. Also knocked out the races (with a brass drift) and replaced the races with the ones that came with the new wheel bearings. The bearings are NAPA bearings. Packed the wheel bearings just like always.
Applied some grease just like always on the spindle. Put it all back together. Tightened the wheel bearing nut while rotating the rotor in the opposite direction. Went to maybe 10 ft lbs. Backed the nut off, set it firm finger tight. Installed the cotter pin. Got a whole bunch of sloppiness in the wheel bearings. I can feel a LOT of it when rotating from the 6 o clock and 12 o clock position. What did I miss? NEVER had this happen before. 2002 f 150 2wd
Ford - Mountaineer :: 2006 - Replacing Front Wheel Bearings?
looking to replace the front wheel bearings on my 06 Mountaineer. Detroit Axle? I found them on both ebay and amazon and prices almost seem too good to be true (under $100, 12 month warranty).
View 6 RepliesFord Ranger / B-Series :: 1999 - Squeaking Front Wheel Bearings
4x4 1999 Ranger ... They are a squeaking and driving me crazy. How hard are they to do, do they need a press or can they be done at home?
View 7 RepliesFord Super Duty (1999-2016) :: Greasing Front Wheel Bearings?
If front wheel bearings can be greased through the abs wire hole on a f250 4X4, will that work on a sealed bearing on a gm product? I have done my f250 but I also have a 2004 suburban.
View 2 RepliesFord Super Duty (1999-2016) :: Vibration In Front End - Wheel Bearings
I have a 2000 F350 4X4 crew cab and have a vibration in the front end. I have done sone investigating and have come to the conclusion that is the front wheel bearings. The dealers says I have to buy the entire hub assemble but I seem to think different. But if I can replace the bearings any special tools that might make it easier ..
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Whine Coming From Front Wheel Bearings?
I have some whine coming from my front wheel bearings so I'm going to replace them both. I'm not sure if this had been done on my truck before, but I'm thinking so since I have Moog greaseable ball joints.
Truck has 250k miles on it. I'm going to check the pads, rotors and slide pins. Anything else that might need work? I'm sure the half shaft could use a once over, but I don't keep my hubs locked so they don't turn much in regular driving.
Ford Super Duty (1999-2016) :: 2012 4x4 - Front Wheel Bearings Replacement
Are just the bearings serviceable/replaceable or is the only option to get entire wheel hub assembly?
View 14 Replies