Santa Fe (CM - 2007-12) :: Front End Knocking Noise
I have a 2009 AWD Santa Fe with a little over 43K miles. Over the past few months it's developed a knocking noise that is most audible from the front drivers side area. The knocking speeds up or slows according to the car's speed, and appears somewhat louder when the steering wheel is turned. My initial suspicion from my surfing here is either a CV joint or wheel bearing.
I took it to the dealer that sold it to me and am getting increasingly frustrated with their work. The first irritation was yesterday when the service advisor called to say the problem was corroded rear rotors and brake pads; both wear items not covered under warranty. Though skeptical (since I was hearing the noise coming from up front, not from the back) I authorized the $300+ for turning the rotors, replacing brake pads and flushing the brake system.
When I showed up to retrieve the car I was told it'd been test driven and the problem was fixed. I asked the tech specifically whether he'd checked the CV joints and he assured me he had and they were fine. Upon driving away it was immediately obvious the knock was still there. Back to the dealer. I had the tech drive it with me in the passenger seat. He acknowledged he could now heard the knocking, but claimed he previously couldn't hear it over the horrible loud squealing from my rusted rotors; nor had he heard it on his alleged post-fix test drive. The problem with that is I've never heard this claimed horrible loud squealing, nor has my girlfriend, nor have any other regular passengers.
Back at the dealership the situation escalated when the service advisor, in defense of his tech, also claimed the horrible squealing rotors had drowned out any other noises. The problem with that is he admitted he'd not come along on any of the previous claimed test rides, and claimed to have heard the horrible squealing rotors only while the car was in the shop and/or up on the lift while the tech was turning a rear wheel by hand. Err, if the car was not driven any for distance or speed, of course you wouldn't have heard any knocking up front.
Yesterday evening I got a call from the shop advising the problem had now been diagnosed as a bad wheel bearing, front driver's side. I was assured it'd be fixed and ready this afternoon. All well and good. I showed up this afternoon and the service advisor stated the car was just getting buttoned up and we're going to test drive it. Fine, I'd like to come along on the test drive I said. He agreed, asked me to sit in the waiting room. In a few short minutes though - not long enough IMO - he came back out to advise the tech had just test driven the car (without me?!) and the knock is still there.
As of this writing I have no info from them as to what it might be. I left the car with them and asked the service advisor to have the tech(s) double check the CV joints. He got huffy with me and declared that if if the tech said he'd check them, there's no need to do so again. At this point I'm not sure whether I can trust this dealers' service department. I don't think the service advisor is being honest with me - I think he's been caught in a minor fib re: test riding and is compounding the situation by sticking with it.
Santa Fe (CM - 2007-12) :: Knocking Noise From Top Of Front Windshield
My new SANTA FE has merely covered 10000 km. The vehicle is running fine except a very irritating loud knocking noise from top of front windshield area. The noise is generated as soon as vehicle goes over a minor irregularity on road or even if you make a sharp right or left turn.
View 24 RepliesSanta FE SM (2001-06) :: Knocking Noise In The Engine After Oil Change
2004 Santa Fe, 2.7 L V6. The oil was changed approx 5-7k miles ago (not really sure as I bought it from someone else) and I just changed it today. There's a new knocking noise in the engine. I used normal castrol GTX oil, 5w-30.
I drove it about 20 miles and the noise is still being made, so it's not a circulation problem.
Santa Fe (CM - 2007-12) :: Strut / Shock Failure - Knocking Sound From Front
My 2008 Santa Fe (3.3 2WD) produces a knocking sound from the front every time I go on a bump while the wheel is turned. I can pretty much reproduce it at will. Occasionally, I hear the same sort knock from the rear as well, but I cannot confirm that it is consistent.
I do suspect that something is wrong with the struts. The only issue is that the car has 67k KM (41k miles), and to me, that seems a little early for that sort of thing to happen. My driving is pretty standard on standard roads, although winters up here tend to produce potholes that I sometimes cannot avoid.
I've had my struts fail on my last car (2000 Mazda Protege), but that was 9+ years old and with almost 3 times as much mileage on it.
Santa Fe (CM - 2007-12) :: Knocking Sound Happening In Front Passenger Side
I have a 2012 Santa FE 2.4L, I have a knocking sound happening in my front passenger side once I go over bumps. Would like some info on the different parts that can cause this.
View 10 RepliesSanta FE SM (2001-06) :: 2002 V6 Developed Loud Knocking From The Bottom End
I have a 2002 v6 petrol Santa Fe which developed a rather loud knocking from the bottom end over the weekend.
To cut a long storey short I have had the best use from this car for a long time and she has served me well so rather than patching her up I have decided to replace her with something new and less guzzley :-)
The reason I have got in touch is because I'm not sure whether to break her or sell as is. I have the space and room to break the car up but understand it will take an age to sell the parts and don't know if this is more likely to raise more cash than just selling the car as is with the fault.
Santa FE SM (2001-06) :: Knocking Noise When Turning The Wheel Sharp
Ok I changed the 2 front struts on my Santa Fe. And the strut mounts. Rides alot better and no shimmy in the wheel but I noticed a knocking noise when turning the wheel sharp. What I have come to find out the top of the spring it turning the whole cup or top hat it sits in. I put the cup in the right spot because there is a flat spot on the thread of the the strut.
View 13 RepliesSanta FE SM (2001-06) :: 2002 - Continuous Knocking Noise When Accelerate
I have a 2002 Santa Fe, 2.4, 2WD, stick shift with 125,000 miles on it. The problem started 9 months ago, when I was driving up-hill above 45 or 50 mph that continuous knocking noise came up from the rear-underneath the car, in order to stop it I had to reduce the speed, the problem has been there since then, but now is getting worse due to the noise comes up even driving on the street, when I'm gunning the car and shift to the next gear the noise comes up for 1 second, meanwhile I'm pressing the clutch pedal and then disappears, It's really weird because looks like it is related to the engine but the noise is in the rear.
I forgot to tell that the noise is not metallic, sounds like plastic or rubber, besides I already replaced the rear shock absorbers, inspected the exhaust to see any sign like touching the body of the car and checked all around the tires to see any sign of wear out and nothing, everything looks good.
Santa FE SM (2001-06) :: 2004 - Loud Knocking Sound Coming From The Top Of Engine
My 2004 Santy 3.5L (I am the original owner) just turned 91.4K miles and all of a sudden a VERY LOUD Engine Knocking sound came from the top of the engine. I have been changing my own oil since new with synthetic Mobil 1 and a new filter every time, and I never had any issues. I changed it last week at 90K prior a Spring Break trip (1350 miles).
Then yesterday after I let her rest for 1 day, I took the kids to school and within 10 miles of my house the ticking HARD loud noise started happening. I pulled over near a shop (within 1 block of where the noise started) and they said...don't drive it it sounds like a lifter collapsed, or a rod bearing or something big...
I had her towed to the dealer and the first thing they told me is to gather all the oil change receipts and a "manifesto" and they asked me how often I change the oil... I said every 5K miles. I change my own oil and have done since day 1.
BTW, Timing Belt, Water Pump, tensioners, belts, coolant, spark plugs and coils were changed last year at 77K miles.
The car should still be covered under the 10year/100K Powertrain and I believe they are trying to build a case so Hyundai can cover this or not...
They still need to tell me what's wrong... I change my own oil so I don't have receipts for "oil changes" and I have a log of when oil was changed...
Santa Fe (CM - 2007-12) :: Knocking And Grinding Noises Happening From Time To Time In Front End
Last oil change at the dealer (they're free) I informed the service desk of some knocking and grinding noises that are happening from time to time in the front end.. and fluid in the driveway.. they did the oil and said they saw nothing... so I have to go back next week for my last free oil change and before I made the appointment, I dropped in to see my regular mechanic.. steering rack is leaking on the passenger side and has been for a while as the fluid is down to the minimum line in the reservoir.
Made the appointment with the dealer, informed them about the noise again and fluid on the driveway.. again. Let's see what they say this time.
Santa FE SM (2001-06) :: 2002 - Front End Shake At 30 To 40 Mph?
The best that I can describe what it feels like is at around 30 to 40 mph it shakes like your going over the side shoulder little pumps with both wheels. Only at those speeds... I all ready changed struts, tires, rack in pinion, upper and lower ball joints and tie rods. I have not change the tie rods that go up and down from struts to spindle its like 6" long or so can that be it? Or CV shaft?...
View 1 RepliesSanta FE SM (2001-06) :: Front End Shimmy At About 70 Mph - Bad CV Joint
'05 Santa Fe 2WD 3.5. Front end shimmy at about 70 mph. bad CV joint. I am replacing both left and right. Got everything out of the way to remove both CV's. Problem: The retaining ring at the end of the axle shaft will NOT release the axle. Pry bar not having any affect.
View 1 RepliesSanta FE SM (2001-06) :: Rust On The Front Subframe
I have a 2001 hyundai santa fe v6 all wheel drive the car is actually my wifes car and she likes it however I have recently noticed some significant rust on the front subframe where the the lower control arm attaches my question is is there or is there not a recall for this again 2001 v6 awd salt belt car ohio to be exact again.
View 10 RepliesSanta FE SM (2001-06) :: Front Right Caliper Does Not Work
My front right caliper does not work. was changed ( both sides) also hose from right side because it still did not work. Found that fluid gets from reservoir to abs but does not come out to front right wheel. Place air pressure from hose to abs, and runs fine, from reservoir to abs and runs fine from abs to out from abs to front right and air does not go in.
But when pressure goes from out of abs to in abs from reservoir air flows fine also. What is going on...
Santa FE SM (2001-06) :: Front End Shimmy At About 70 Mph - Bad CV Joint?
'05 Santa Fe 2WD 3.5. Front end shimmy at about 70 mph. bad CV joint. I am replacing both left and right. Got everything out of the way to remove both CV's. Problem: The retaining ring at the end of the axle shaft will NOT release the axle. Pry bar not having any affect.
View 1 RepliesSanta FE SM (2001-06) :: Leakage In Front Of Radiator
My 2005 Santa Fe, 2.7 liter, automatic, FWD. with 180K miles had a cracked radiator. The leak is in the front of the radiator about 6 inches right of the filler neck (as you stand looking at the front of the car).
I've found an OEM replacement radiator and looking to replace this weekend.
I can see I need to remove most of the front grill and support, drain the radiator, move some parts out of the way and disconnect to hoses and fan electrical leads. Is there anything else I'm missing? Is there a good write-up on a radiator change that I'm missing?
Santa FE SM (2001-06) :: Vibration In The Front End When Reaching 60 - 70 Mph Range
Last couple months, I've started to have some major vibration in the front end when reaching the 60-70 mph range. Some minor vibration in the 55-60 and 70-75 ranges, but primarily (and worse) in the 60-70 range. It only happens when I'm pressing the gas for more acceleration (particularly when I gun it), not when I'm coasting in that range. I had the tires balanced a month or so ago, so I know it's not that.
View 1 RepliesSanta FE SM (2001-06) :: Front Door Actuators Not Communicating?
I just picked up a 2006 GLS with 66,600 miles. Everything works great aside from the front door actuators. Outside at the drivers door I can lock and unlock the doors (except for the passenger front door). From the passenger side I can lock and unlock the doors (except for the drivers door). The Central door lock switch will not lock or unlock the front passenger door.
I am hoping that the fact that either side functions with the other doors indicates that the actuators are still working. My guess is that the front actuators just aren't communicating with each other. Is this just a programming problem that the Hyundai Hi Scan Pro computer can resolve? It doesn't appear that the vehicle has been programmed for the xx MPH automatic door lock. We had to have the dealer program this "option" on our 2007.
Santa FE SM (2001-06) :: 2003 V6 Front Brakes Dragging
2003 Santa Fe 3.6 V6 with ABS
The car sat virtually driven for a year before it was given to me. After 2 weeks of normal driving this past December, the power brakes completely went out. Had to drive the pedal to the floor to stop at even slow speeds. Took the mechanic and they replaced the Master Cylinder and both brake lines.
Shortly thereafter had an unrelated issue with a coilpack gone bad. Replaced coilpack and at that time replaced both sets of brake pads on the rear.
In January, started noticing grinding metal on metal from both front brakes. Took the mechanic and they replaced both calipers, rotors, and pads.
2 weeks or so later, after 10 minutes of driving the front brakes started dragging. The pedal would become extremely hard, and I could notice thew smell of the pads burning. Would have to pull over, put the car in park and pump the brakes to get the calipers to release. This would occur intermittently every few days. Pumping the brakes would always solve the problem.
Over time, the issue became worse, ocurring far more frequently. Around this time I noticed leaving the engine on in park while pumping the brakes would no longer solve the issue. I would have to completely turn the car off and pump the brakes to get them to release.
Started noticing around this same time that the left rear started grinding. The brake pads completely wore down in 3 months time. Too to the mechanic. Replaced caliper, rotor and pads.
Still having the same issue with the brakes dragging. One mechanic thought it could be ABS related and advised me to pull the fuse and the two breakers to diagnose. Still had the same issue, so put the fuse and breakers back in.
No mechanic seems to know what is going on with it, and I'd hate to have to replace all the brakes again as the problem goes untreated. Is it possible that the master cylinder or brake booster could be the issue? It's a brand new master but that doesn't necessarily mean anything, I'm told. Again, I can only get the brakes to release the pressure by pumping the pedal with the engine off.