Tiguan :: Got Cornering Lamp Failure Warning - Replacing Bulb?
Got the cornering lamp failure (AFS) warning this morning. How easy this is to replace and what the bulb part number is. Did some searching and found that it might be an H7 bulb. Is that correct? Would like to avoid a trip to the dealer if this is pretty easy to replace.
View 7 RepliesPrius (2010-12) :: Bulb Color In Top Of Headlight Housing?
I have seen many mods to headlights in the 2012 Prius, many of them have upgraded to HIDS and what not. My question is the little bulb in the top of the headlight housing i see is like a blue or LED color, yet i cannot find anything about them anywhere. Love the look and would match my HID kit once i get installed this weekend......
View 19 RepliesFord 6.7L Power Stroke Diesel :: Side Marker Bulb Replacement
2012 King Ranch, Side marker lights on the side view mirrors. How do we remove it or gain access to bulbs!
View 7 RepliesAccent MC (2006-11) :: 2009 - How To Replace Fog Lamp Bulb
One of the fog lamps on my 2009 Hyundai Accent has blown and I want to replace it, but I am not particularly technical. How to do this? Or any website or video tutorial.
View 3 RepliesLexus RX 2004-09 :: Led Bulb Fell Into Housing Of Headlights
I was changing out the little parking light bulbs outside of the housing with led bulb and it fell into the housing of the headlights!! Wow my luck do I have to remove the whole bumper to get this bulb out of the housing?
View 6 RepliesSanta Fe (CM - 2007-12) :: 2009 - Rear High Mount Stop Lamp Bulb Replacement
How to replace the bulbs of the rear high mount stop lamp on a 2009 Santa Fe?
I got the bulbs already, located the 2 nuts on the inside directly behind the brake light, but when I remove them, the assembly won't pop out.
I know the manual says they recommend getting these particular bulbs replaced at an authorized Hyundai dealer, but since I already bought the bulbs, I'd like to try and do it myself if at all possible.
Lexus GX 2004-09 :: Bulb Came Loose And Fell In Running Board Housing
I was trying to replace the bulbs in the running board and the first bulb I tried to replace when reinserting the bulb came loose and fell in the housing.
Is there anyway to remove the running board light assembly or how to get the bulb out of there?
Kia - Sedona :: 2002 - Moisture Inside Head Lamp Casing
My driver side front head light compartment continually has moisture inside of it. My question(s) are how does that happen, and is there a way to stop it without just replacing the entire unit? The head light works okay but figure that this can't be a good thing.
2002 Kia Sedona Mini Van6 cylinder147,000 miles
Azera TG (2006-11) :: Condensation On Inside Of Head Lamp On Driver Side
I don't suppose there is any easy way to clean this. I was going to remove a black cover directly above the bulbs but there is a notice on the black cover right behind it warning of tampering with air bag sensor. I assume its not in the front cover but looking further it doesn't look like I will have any access to the area I want to clean by removing it. 68k on 07 azera. Too soon for this,no?
View 1 RepliesGolf/GTI VI :: Water Inside The Housing Of Fog Lights
So it's been raining here a lot on the East Coast lately, especially in NJ and last night after getting out of work there were some few small floods I had to go through in order for me to get back home. This morning as I walked around my car to check if everything was OK I noticed that my fog's has water inside the housing. How do I go about drying them out or should I take it to the dealer and have them fix it for me.
View 17 RepliesFord Excursion :: Replacing Dome Lights - Separation Of Trim From Housing?
Ok, I'm stumped... I've pulled the housing out for the 2nd row dome/reading light and I'm trying to replace the bulb...
How in the hell do you separate the trim from the housing to replace the freakin' bulb?
I've almost broken the thing in half trying to get access to the bulb... My FSM doesn't give any indication how to separate the housing just that the bulb needs replaced...
Lexus RX 2004-09 :: Water Inside The Fog Light Housing
Just bought a 2009 RX 350 in Bamboo Green.
I have an 09 2nd Gen RX with water in the fog light housing, the bulb has blown as well so there's shattered glass inside.
Phaeton :: Button Crooked Inside The Cup Holder Housing
I went to push that bastard in yesterday (gently) and I felt something pop behind it - the button depressed, went crooked inside the cup holder housing and now won't "un-depress" and the cup holder won't "rise" back up. I've tried messing with it, but to no avail. Car's in for the 30K service, asked VW to take a look at it - I know its "only" a cup holder, so I'm not bent out of shape over this.
View 6 RepliesPassat (B6) :: 2006 - Replacing The Bulb
Based on what I've gathered, this message means that I need to replace a bulb (and not the whole headlight, right?). I haven't looked in my manual yet...but is there a model number for the bulb if I were to purchase it somewhere (i.e., online) if I intend to replace it myself (and/or have someone other than the dealership replace it)?
I have a '06 Passat 2.0.
Toyota - Sienna :: 2005 - Headlamp Lens Housing Has Moisture Inside?
2005 Toyota Sienna minivan. Neighbor brings it by my house for a headlamp bulb.Rt head lamp low beam is out. Access is easy with the hood open.Rt Headlamp lens housing has moisture inside, left does not.Bulb is not broken or shatterd, it is in one piece.Before we spend $76 for an HID bulb, I have questions on the HID system. Is it that simple..just a bulb..or is there electronic controls involved that could be the culprit?Did the moisture take out the bulb in the first place ? ( halogen bulbs explode when wet ) or cause a chort in the electronics ? I already told her we need to take out the lens body and find and seal the leak and dry it out but I'm curious about the HID system.Do I dare just put 12v to the bulb ( #D2R 35w ) to test it or is that a bad idea with HID ?....( my best Ford tech to ask is off today )
View 2 RepliesPassat (B6) :: OEM Projector Fogs Installed But Haze On Inside Of Driver Side Housing?
I had the OEM projector fogs installed today, as well as the rear fog and Euroswitch (will post pics soon!). I love the look of the lights off just as much as on - such a great mod! My only concern is that there is some kind of haze (almost like condensation, but not) on the inside of the driver's side housing. It doesn't appear to obstruct the light, but it is clearly visible when the fogs are on. What this might be?
View 2 RepliesPhaeton :: Replacing 3.0 TDI Driver Side Light Bulb?
Driving to work this morning my 'please check lights' warning came on and sure enough my drivers side side light bulb seems to have failed.
Trying to look via search and many threads to see how much work is involved to replace this tiny bulb. The car is due a service shortly and i could get the VW dealer to sort this out but is this going to be something daft like 3hours labour/bumper removal or is it an easy DIY?
This is the first thing to 'fail' in 2.5 years of owenership and not one that needs immediate remedy but would like to sort it out. Presumably i can buy the bulb cheaply enough from VW or Halfords as its not HID etc.
Elantra MD (2010-15) :: Replacing DRL / High Beams With Led Bulb
I have a 2016. I'm waiting on some aftermarket headlights and they will look great with LED drl/high beam. Have you installed them in this location ? I'm worried about fitment with the led being too big to fit in there.
View 23 RepliesCamry :: 2007 LE - Replacing Indicator Light Bulb In AC Controls?
The little mark on the control knob to select air flow is unlit at night with the headlights on in my 2007 Camry LE. Apparently there is a bulb in there somewhere which needs to be replaced. How to change that bulb and get an indicator at night so that I can position the knob in the correct position?
View 1 Replies