Prius (2001-03) :: 2002 Check Engine Light Codes For EVAP System And Misfire
My check engine light came on the other day, with no symptoms or problems. Today I stopped at the Auto Parts store and had the codes read. They were P0440, P0441, P0446, and P0301. They are for the EVAP system and misfire.
I had read here that one of the codes could be for the gas cap so I tightened it and then, also as read on here, disconnected the negative 12 V battery cable to perhaps clear the check engine light. I was curious.
When I started the car again, I now have not only the check engine light, but the red triangle exclamation point. How would you proceed? The 12 volt battery is around 5 years old. The entire exhaust system was replaced last year.(not O2 sensors though)
The hybrid battery was replaced at 70,000 miles and I now have 110,000 miles on it. I really wonder why disconnecting the battery and reconnecting it caused more error lights to appear? Also, the Auto parts guy said his code reader was fine for my car but I seem to remember here that there may be a special Prius one.
Camry 2012+ :: Check Engine Light On - Codes For EVAP Emission Control System
So mad today. Check engine light came on, plugged in my scanner, got P0441 EVAP Emission Control system Purge Flow Fault and P0455 EVAP Emission Control System Leak (Large).
8-month old '13 TCH XLE is getting a check engine light already.
Passat (B5) :: Check Engine Stays On Majority Of The Time - Evap System?
i have a b.5.5 V6 4motion and My check engine stays on the majority of the time. I've had a tech check the code and he tells me its my Evap system. The same tech told me that it was actually pretty useless to repair the problem unless the check engine light bothers me..
View 5 RepliesLexus IS 2014+ :: Check Engine Light Came On - EVAP Error
After only 1k miles after purchase my Check Engine light as come on. P0440 and one other (left the paper at work)
I haven't overfilled on Gas, the Gas Cap is completely on (2 clicks), and I haven't OVERLY pushed the car either haha.
The only update was replacing the STOCK filter with K&N Drop In Filter.
Passat (B7) :: Check Engine Light Came On - Bad EVAP Purge Valve
I only have 2200 miles on my new 2012 Passat SE V6 and the check engine light came on the other morning. I took it in to the dealer and they found codes P0442 (EVAP Emission Control System Small Leak Detected) and P0456 (EVAP Emission Control System Very Small Leak Detected). The tech says on the work order that he removed and tested the EVAP Purge Valve with a vacuum pump and the valve would not hold a vacuum. The dealer replaced the EVAP Purge Valve under warranty. They say this is the first 2012 passat V6 they've seen with this issue. I've only had the car for 4 weeks.
View 5 RepliesPontiac :: Check Engine Light On / Evap Leak Code?
I've had a check engine light on in my 3.5 Pontiac G6 for awhile now. It's an emission code (can't remember what code but evap leak). The solenoid by canister was also tripping a code that disappeared after I changed it. However, the evap code still persists. Last night while changing my oil I noticed the intake air hose to the crankcase had broke at the case and wasn't connected. It's the hose that runs from the engine intake to the crankcase for the PCV system.
I am replacing the hose regardless, but my question is; would the intake hose for the PCV system being loose cause an evap leak code? I am thinking no but it'd be nice if it was that simple.
Toyota - Corolla :: Check Engine Light On / Small Evap Leak
I have a 2004 Toyota Corolla- the CEL has been on for months- the code is for small evap leakI have tried cleaning rust from filler neck at gas cap- no change. I have had a smoke test done with no leak found.
View 5 RepliesSanta FE SM (2001-06) :: 2004 - Check Engine Light Is On / EVAP Canister Solenoid
I have a 2004 Santa Fe 2.4L the check engine light is on and says about the evap canister solenoid. I am trying to located it but I can't find it. So, where would it be located at so I can take it apart and where is the Canister located as well...
View 1 RepliesGolf IV / Jetta IV :: Check Engine Light Comes On - Code P0456 For Evap Leak
I have a 2005 1.8 TJetta GLI owned for about 2 months now. Gas cap warning pops up then goes away when I turn off the car then check engine light comes on. I've change the gas cap to new oem one changed the purge valve [URL] .... After a couple of weeks same issues again brought it to my mechanic he ran a leak detector and told me that there are Evap leaks. I read somewhere that I might need a need charcoal canister and a fuel tank.
View 12 RepliesPrius Plug-in 2012-15 :: Engine Check Light Is On - Hybrid System?
The engine check light is ON this morning. It said that there are problems for the hybrid system on the display. I sent it to dealer immediately.
View 7 RepliesToyota - T100 :: Check Engine Light On Due To Faulty Emission Evap Control Pressure Sensor
Engine runs perfectly but "check engine" light" stays on due to faulty Emission Evap control pressure sensor (P/N; 89460-0w020). Problem is Toyota no longer makes this part and there is no after market for it. It appears I may have to "junk" a perfectly good truck.
View 9 RepliesFord Ranger / B-Series :: Check Engine Light Came On - Code P0457 EVAP Small Leak Detected?
I had a check engine light cane on. I took it for it to get checked and they gave me this code- P0457 EVAP small leak detected. ECM has detected a large leak in the EVAP System during a system monitor test.
The paper said I had a leak in the Evap canister or hose. I took the truck to a mechanic and was told I had Bad oxygen sensors. Can Bad/Dirty oxygen sensors make this error code come up?
Exactly where the oxygen sensors are? I was told they were behind the mufflers but I didn't see any and the diagram I found was not accurate.
2002 Ford Ranger XLT v6 extra cab.
Grand Prix :: SES Light Comes On Intermittently - Evap System?
Just found out I have a problem with my evap system (97 Grand Prix GTP). My SES light comes on intermittently. Not sure what the number of the code is, but my mechanic said it was because the vacuum was too strong (not a leak). He said could be from a kink or clogged hose. What this could be? Are the hoses and canister easily accessible for me to check?
View 10 RepliesPrius (Gen 3) :: Check Hybrid System Light Came On
So a little over a month ago, I was driving my 2010 Prius (about 42k miles) when the Check Hybrid System light came on. I lost power and my car was stuck on the road, as I was unable to get it into neutral. So I called a tow truck and was towed to my local dealership. The dealership ran some tests, thought it might have been the throttle body. They switched my throttle body with a loaner prius to see if this fixed the problem. The new throttle body worked in my car and my throttle body was put into the loaner and functioned fine. Then they ended up fixing a TSB for the electronics in the car. I was told the problem was resolved and I could pick up the car about a week later.
After picking up the car a week later, before I could even drive away from the dealership, the Check Hybrid System warning came on again. I talked with the service manager and left my car to be fixed again. They checked all the systems and were still unsure what the problem was. Eventually they made sure all the connectors were properly seated and test drove the car and ensured the problem was gone. About two weeks later, I was told the car was fixed and I could pick it up.
After picking up the car, I was still unsure the problem was fixed, but I was told that was all I could do. After having the car, for about a 1.5 weeks I was on the highway. Once again, the check hybrid system light came on and I lost engine power. Luckily, I was able to pull over from the left lane without causing an accident. Once again, I had the car towed to the dealer and now I am waiting to hear back from them.
Prius (2010-12) :: Check Hybrid System Then Check PCS System Warning
I just bought a used 2012 Toyota Prius iTech from a country town 3 hours away. About an hour into the drive home, the display informed me to "Check Hybrid System" and then "Check PCS System". The car continued to function for a little while, then eventually lost acceleration, so I pulled over. I turned it off and on again; the warning light remained but the car started and continued to work, but soon after I lost acceleration again. This happened one more time.
Then I Googled the problem and discovered that you could "turn it off and on again three times to reset the computer". I did this and the problem disappeared and did not resurface for the remainder of the trip, and has not happened again since.
Prius (Gen 3) :: 2011 Ran Out Of Gas And Check Hybrid System Light Came On
I ran out of gas in my 2011 Prius and immediately all warning lights came on as well as the "check hybrid system" light. After filling the gas I read similar threads on here and trouble shooted the battery. 12v Battery tested good, so now what is the next step? I also did a reset on the 12v battery and that didn't work.
View 19 RepliesPrius (2010-12) :: Check Hybrid System Light On
I have a 2013 Prius Persona with about 5,300 miles on the vehicle. Just recently had the 5,000 mile service taken care of at a local toyota dealership. The very next day I tried to start my vehicle with no prevail. My instrument panel indicates "check hybrid system" (!) the car will not start, nor will it shift into drive or reverse, only into the neutral position. Made several attempts to turn vehicle on and off and tried to jump start. Still no luck. Had the car towed back to the dealership. Mechanics are still trying to identify the problem. What may be the cause?
View 5 RepliesLexus LS 2007+ :: Check Engine / PCV And VSC System Light Came Up Suddenly
2007 LS460L ... Check Engine, PCV, and VSC system light came up all of sudden. Traction control, cruise control and "Hold" system doesn't not work. I recently replaced Air filter, A/C filter and Oil change.
View 4 RepliesPassat (B5) :: Check Engine Light Coming On - System Too Lean?
I recently had some work done on my 2001 1.8t Passat. All new vacuum hoses & camshaft tensioner replaced by VW dealer. Check engine light is coming on and an independent shop near read out a code: Bank 1 mixture adaptation(multi): System too lean.
What does this mean??? And could this relate to these parts being replaced??? Work was done approx 2000 miles ago.