Prius (2010-12) :: Change Reverse Beeping From Continuous To One Beep?
A couple months ago I bought a 2010 with the basic trim package. How to change the Beeping in reverse from continuous to "one beep". The owner's manual says that you have to take it to the dealer.
View 5 RepliesPrius (2010-12) :: Continuous Beep And Check Hybrid System Message Appeared
Went to start the car up this morning - foot on brake and pressed the Power button. The car went through its checks but when it finished the 'Welcome to Prius' graphic it did a continuous beeep and displayed 'Check Hybrid System' and didn't start.
I turned it off and tried again and on the third or fourth attempt the car eventually fired up, the error message was gone and there were no warning lights on the dash. The car did smell like it was running rich though.
I turned it off and called the dealers. They said if no warning lights are now on it should be ok to drive the 6 miles to see them and they'll check it on their computer. As I drove to see them the car was running OK but the fuel economy was shocking. I was getting about 40 mpg UK (30 US mpg) as a trip average.
Prius (2010-12) :: Continuous Beeping In Reverse?
Why the continuous beeping in reverse? Wouldn't one beep suffice? My suggestion to the engineers would be...If you must have the car do something extra electronically while backing-up, have it mute the radio speakers. My guess is that more accidents would be prevented by the forced silence, than by the distracting beeping.
View 19 RepliesPrius V :: Continuous Beep And No Door Lock
Normally when I lock my '14 'v' I touch the sensor on the drivers door handle and I hear the beep and the doors lock. Today I had one instance when I touched the sensor (bare handed) and the doors didn't lock and I got a continuous beep until I opened the door.
Checked and everything looked OK. All the doors were closed, etc. Tried it 2 or 3 times and the same thing happened. I finally gave up and locked it with the fob, which worked fine. The next time I went to lock it, several hours later, it worked fine.
I couldn't find anything in the manual that would indicate why I got this continuous beep and no door lock. Why it did this?
Prius (2010-12) :: Cannot Turn Off Reverse Beep?
The technician at Toyota showed me the options. You could either have a continuous beep or the intermittent beep, but you do not have the option of turning it off. I told him it was possible, but how?
View 19 RepliesPrius (2010-12) :: How To Disable Reverse Beep
Looking for the instructions for disabling the reverse beeping on a '11 prius?
View 2 RepliesPrius (2010-12) :: Scan Gauge II - How To Change Reverse Beep
I could have sworn that I read somewhere on here how you can use the Scan Gauge II to change the reverse beep, but like they always say I cant find it now.
View 12 RepliesPrius (2010-12) :: Does Reverse Beep Go Back To Default Setting After Disconnecting Battery
I had the reverse and seat belt beeps changed by the dealer before I took delivery. Now I want to install some mods which would entail disconnecting the 12-volt battery. With pre-2010 Prii the beeps would go back to the default settings. Will this happen on the 2010+? I don't want to make another trip to the dealer.
View 10 RepliesCamry 2012+ :: 2015 XSE / Continuous Beep Noise When Switch On Or Turn Off Engine?
i have 2015 xse, every time i turn off my car or switch on my car, i hear a continuous Beep sound. i think that sound comes from engine bay area but i was not able to find the actual source.
View 6 RepliesSanta Fe (CM - 2007-12) :: Thump Noise When Start To Move / Continuous Beep Sound
I'm using the 2011 Santa Fe.Got few question to ask.
1.When start to move there is a thump noise and sometimes it feel like going over something from the rear area.Happen only when start to move.
2.Using the keyless remote. Sometimes push the rear trunk button to lock and arm the car there but will be a beep sound continuously. Sometimes the rear trunk button are unable to open or arm the alarm system.
Ford Super Duty (1999-2016) :: Continuous Beep In Back Up Camera
I have a 2014 F-250 6.7 crew cab. Noticed today when I put the truck in reverse there's a continuous steady beep where as before the beep was intermittent, as I got closer to the object it would become faster until it would eventually become a steady beep. Which I'm sure was working correctly. Tried cleaning the Camera lens but it didn't work, it continued the steady beep now I'm worried.
View 14 RepliesPrius (2010-12) :: Continuous Alarm When Trying To Select D / R / B?
I have the 2010 Prius with 23K on the dial and over the past few days when going to use the vehicle, at the time of applying the brake pedal and pressing start, all fine, then when we attempt to move the shift leaver to D or R we are greeted with a continuous audible alarm and the display, is telling us to shift to Park with a few other words for Parking the vehicle. No other warning lights occur but we found out the car will drive or reverse with the continuous alarm and message displayed for selecting P.
Okay, put techstream on and I have no trouble codes, at all in fact which is a good thing and I can also hear the car working as normal with P engagement, neutral etc. So the only way to correct the alarm is to turn it off and try again. Any try many times indeed! So its happened to the wife and now myself. Eventually for some reason all back to normal. I've also tried variations of brake pedal application and trying to move vehicle thinking P pin locking problem but it appears to be a signal malfunction or something simple.
Prius (Gen 2) :: Turning Off Beep While In Reverse
Cannot any instructions of how to do it. there are a few links that are supposed to tell you, but those links did not lead me to any instructions.
View 8 RepliesPrius C :: Beep In Cabin When In Reverse?
New noise maker means they turned off that "cabin" beep nonsense when in "R"? With our ZVW30, the ONLY indication that the last of the gas is gone is the 'power flow' arrows disappear. I'm wondering if Toyota might have brought back something to let the driver know the last of the gas is gone.
View 10 RepliesPrius V :: Turn Off Beep When Reverse Selected?
Is there a way to disable the beep when reverse is selected?
View 19 RepliesPrius (Gen 3) :: Unable To Disable Reverse Beep Using Bluetooth OBDII?
I picked up a bluetooth OBDII scanner and plugged it up, and tried following the instructions found on this forum. Only problem is, every time I run 3b ac 40, I just get a return of NO DATA.
View 2 RepliesPrius (2001-03) :: Deactivate The Valet Key?
Long story short, I believe someone stole my valet key and I want to deactivate it. I've read the instructions
You can erase all the keys and start over by turning a working master key 6 times and then opening and closing the door 7 times. Then remove the key and reprogram again.Click to expand...
from Programming New Keys, but I'm afraid if I erase all my keys how will I reprogram it? Will it accept the first master key inserted to the program, since there will be none stored in the memory? Will I need to do the initial procedure to marry a master key to the ECU and let it set for 30 minutes?
This is a gen1 Prius, but I believe it uses the same interlock system.
Prius (Gen 2) :: Deactivate Start Button - Car Symbol Still Blinks?
I'm parking the car (gen. 2) a long while, so I checked the manual which shows the deactivation button on/off positions. It show the button sticking out more = the off position. However, the car symbol still blinks on the dashboard.
View 2 RepliesFord Super Duty (1999-2016) :: Continuous Popping Noise When Put It In Reverse And Hit The Brakes
I have a 2015 F250 6.7L and I am having problems with the brakes. When you first start the truck and put it in reverse and hit the brakes there is a continuous popping noise coming from the floor board and it can be felt in the brake pedal. It feels like the brake pedal is kicking back, once you drive the truck a little ways down the road the brakes work fine but if you hit the brakes a few times in a row like coming to a red light the noise is there again and it can be felt in the pedal.
View 3 Replies