Passat (B5) :: Raising Rear Or Front Wheels - Jack Point?
I have a 05 B5.5 GLS wagon.
I have a floor jack and want to raise both rear or front wheels for a quick snow tire changeover but I have not been able to locate a good jack point.
Ford F-150 (2009-2014) :: 2013 - Front Frame Bent - Replace Whole Frame?
Bought a 2013 FX4 two weeks ago to replace my 94 F150 and got to enjoy it for a whole 10 days before I got rear ended at a stop light. The car hit me doing between 30-40, fast enough to make her airbags go off, and it was hard enought to force the bed to hit the cab. Unfortunately, the damage is more than cosmetic body work. The bottom of the bed is pushed up under the bedliner and the frame is bent in front of where the leaf spring connects. My concern is that the adjuster will want to "fix" the frame and I will be stuck with a lifetime of alignment issues, suspension issues, etc. I know the rear of the frame is not as much an issue as if the front was bent, but I don't know how they could fix it without cutting it and welding in a new piece, and how can I know that the frame is true?
View 14 RepliesCamry 2012+ :: 2013 SE - Headliner Bent Above Rear Window
I recently purchased a certified 2013 Camry SE and just found the headliner bent above the rear window. I'm not sure if my 4 year old decided to take a look up in the headliner and bent it or if I missed it during initial inspection. It looks like it was pulled down with one finger and its kind of folded. Its at about the 1/3 point going across the upper rear window. It is a very small bend, only an inch or so deep. Any way to repair a bent headliner? Or have a link on how to repair it? I was thinking of using hot glue and a metal rod or plate but am concerned it may bleed through. Its very annoying to see it every day when looking in the rear view mirror.
View 1 RepliesPrius (Gen 4) :: 2010 - Rear Camera Suddenly Started To Point Down More?
It seems like the rear camera has suddenly started to point down more that it used to. We have three Prius's and none of the older one are like this. The dealer tells me he hears this problem all day long and there is nothing he can do about it.
View 3 RepliesCorolla / Matrix 2009-13 :: End Link Tab On Front Right Coilover Bent
So last week I bought and installed a set of Megan EZ street coilovers for my 2011 corolla s. Everything was installed correctly and I lowered them as far as they would go without messing with the spring preload. They don't rub and I don't bottom out and everything was going fine until I pulled the wheels off to re plasti-dip them. At this point I noticed that the end link tab on my front right coil-over was bent. After doing some research I have found that this is a common problem when you lower a car and don't adjust the sway bar preload with adjustable end links. However I have looked high and low on the internet and cant find adjustable end links for a 2011 corolla. I can try and bend the tab back before it breaks or if it does break I can re-weld it back on but I don't want the problem to persist.
View 10 RepliesFord 7.3L Power Stroke (1999-2003) :: Way To Jack Front End?
Doing some suspension work this weekend. Wondering where the best place for jacking up my truck (99 f250 SD 4wd). I need to take the U bolts off so I can't put the jack there. I've got a 2 ton, 3 ton, and 25 ton jack. Only one stand. I need the whole rear end jacked up at the same time. Same for the front. I've heard your not supposed to place the jack on the pumpkin. Is it OK to just jack it up by the axle and put the stand as close to the outside as possible?
View 14 RepliesFord Super Duty (1999-2016) :: F250 - Front Bumper Bent?
I bent my front bumper. Every time I look on amazon or ebay , when I put in my year, model, engine, it says their bumper won't fit. Mine has the 3 rectangular openings, 2 have the holes for mounting and tow hooks. It is chrome with the gray plastic or rubber bottom.Xlt. Also what part is the valance?
View 7 RepliesFord 6.0L Power Stroke Diesel :: Straighten Bent Front Frame Horn?
Any DIY way to straighten a bent front frame horn? The wreck pushed the driver's side horn about an inch towards the passenger door. The bend is right at the cross member.
Using a Porta Power hydraulic jack to push one of these? Not sure how I'd keep it from just bending the opposite, but can prolly figure that out. Just don't know if those are strong enough. I see 4ton and 10 ten models.
Otherwise, are there any other hillbilly methods for pushing or pulling?
Ford Super Duty (1999-2016) :: Where To Put Jack Stands When Installing Front Lift Shackles
When installing front lift shackles, do you place jack stands under the axle, or the frame? I can't really find an answer. I assumed the axle, but i saw a thread and from what i could see it looked like it was supported at the frame and the axle was hanging free in the air. Just want to be sure before i start unbolting the stock shackles tomorrow and kill myself.
View 14 RepliesSanta Fe (DM - 2013+) :: Triangle With Exclamation Point Warning Light
2014 Santa Fe Sport 2.0T FWD / 16,000 miles. All fluids full / up-to-date
On two occasions we've had a warning light appear that is not the CEL. It's a triangle with an exclamation point in the middle of it. The first time, my wife called and told me about it and it only appeared for a few minutes and disappeared. I checked the codes and there were none--that was several months ago.
The second time it happened (a few weeks ago), I was driving on an interstate at 70 mph with the cruise control on. The aforementioned indicator light appeared for about two minutes and disappeared. I immediately called Hyundai Bluelink (within a minute) and asked them to look at the code history and they advised they couldn't see any indication of malfunctions. They further advised that indicator meant that maintenance was needed and that I should make an appointment with the dealer. I pushed them for more info, but the operator remained vague about what maintenance my Santa Fe required.
Why does it only illuminate for a few minutes?
Lexus ES 2013+ :: Cannot Keep The Car Tracking Straight / Steering Has No Defined Center Point
I purchased a CPO 2013 Lexus ES 300H with 31K about 3 months ago. While I really like the car and appreciate all the thought and innovation Lexus has put into the design, the electric power steering system has been casing me concern.
I can't seem to keep the car tracking straight. Since the steering has no defined center point, I find that I constantly have to keep adjusting the steering 1 degree left and 1 degree right to keep the car tracking straight. These 1 degree corrections tend to stick in place and have no motivation to return to center. This becomes quite exhausting on any drive over 30 minutes.
I've had the car into Lexus twice and they found that the alignment was slightly out of spec and performed a 4-wheel alignment and told me what I was experiencing was a characteristic of electric power steering. I continued to experience the same issue. Next the steering torque sensor was reset. Still, same result.
Gen 2 Prius (Audio/Electronics) :: USB To Radio Via IPod Jack?
I use an USB drive with my other radios. Is there a way to get an adapter to allow a USB drive to talk to the Prius radio, without going the IPOD route? Don't have an IPOD but plenty of USB's with music...
View 1 RepliesPrius (2004-09) :: 2008 - No Auxiliary Input Jack
I have a 2008. My car has a 12V socket in the centre console, but no auxiliary jack.
View 6 RepliesPrius (2004-09) :: Faint Jack Hammer Sound From Center Of Car
I first noted a very faint jack hammer type sound from center of bottom of car last week-noticed it once or twice while driving, but then it continued, a little louder, and even continued when I turned the car off for about 5 minutes. Same thing happened when I drove to work the next day, and when I went to get in my car after work, it was still doing it-I think the noise must have lasted all day. Took it to the dealer and he heard it the night I dropped it off but nothing the next day when warranty inspector came out. The service guy did tell me he captured it on the computer read out and it had something to do with the brakes or ?ABS system. Service said they would drive car home and check it out-he got nothing on his long ride home but the next morning when the car was cold, it reproduced the problem. Inspector was due to come back out next day when car was cold, but came later when it had warmed up and did not reproduce, so will not fix it. They tell me is is safe to drive...is it?? And what the heck could this be?
View 6 RepliesGen 2 Prius (Audio/Electronics) :: No Sound From IPod Attached To AUX Jack
2007 Prius with Nav System. Do I need a special cable to use the AUX jack in the arm rest? I have cable I tried to use and I show an AUX connection, but I get no sound out of the system.
View 1 RepliesElantra MD (2010-15) :: 2013 - Front Bumper Paint Peeling
Wondered if others have had a problem with spots of paint peeling off front bumper? Bought car new and have 42,000 miles, rest of paint is in great shape. It is not terrible, but like keeping car nice, would be nice if covered under warranty. Been this way for awhile, maybe should have taken it in, haven't even mentioned it to Hyundai.
View 5 RepliesElantra MD (2010-15) :: 2013 Suspension - Flat Noise Coming From Front Like If Strut Was Out Of Air
Every time I am on the road I get this flat noise coming from the front like if the strut was out of air or something like that. It is a very annoying sound and only on certain bumps of the road.
View 6 RepliesElantra MD (2010-15) :: 2013 - Rattle In The Front Driver Side Door Area Near The Dash
I have a 2013 Hyundai Elantra Limited and have noticed a rattle in the front driver's door area near the Dash. It's hard to pinpoint where exactly it is coming from. The rattle can be heard even on smoothish roads and sounds like a little screw or something else is loose or rubbing against something. I checked that sunglasses holder and made sure nothing was in there but the rattle is still there.
View 55 RepliesElantra MD (2010-15) :: 2013 - Rubbing Type Noise In Driver Side Front When Braking And Turning Right
I have a 2013 Elantra. There is a rubbing type noise in the driver front when braking and turning right. It only rubs(catches) in one spot. Almost like a pulsation, however doesn't pulsate. Hard to describe. Has a new wheel bearing. There are new pads and rotors (two sets of rotors). Took to my Hyundai dealer today. They can't find anything visible. They said only option is to start adjusting/replacing parts as trial and error.
View 3 Replies