Dodge - Engines - Timing-belts - Pump - Neon - Belts :: 1995 - Squeaking Noise - Blown Timing Belt?
I've got my sister's 1995 Dodge Neon with the 2.0L SOHC. While driving it recently I heard a horrible squeaking noise then a ZZZZZZzzzzzz sound. I immediately pulled over. The check engine light came on, and I shut the car off. Coolant was all over the place leading me to believe the water pump failed. I had it towed to my house, and now I will have it towed to the shop to get fixed. I would like to have them repair the timing belt and water pump. However, I am afraid that the valves were beaten to a pulp and now I will need a new engine. I was only going 35 mph when it happened. What are the odds that my valves were smashed up, and is there anything I can do to check them before I pay for a timing belt/water pump repair?
View 19 RepliesTiming-belts - Belts - Volkswagen - Touareg :: 2004 - Timing Chain Malfunction At 90,000 Miles Common?
I brought my 2004 VW Touareg V6(83k miles) to the dealer for a recall on the ignition call and much to my surprise, was presented with a diagnosis of a $6,000 problem! The dealer told me that the computer read some codes which say that the timing chain is stretched and needs to be replaced. They said it will take 4-5 days and should be done asap so it doesn't "go out", because if it does, it's an even more expensive problem. I took the car to another VW repair shop and they asked me if I heard any noised when I start it cold (like pebbles in a bucket). I have not had any problems like that at all, so they said I shouldn't worry until I start getting symptoms. They also said there is no recommended point (like 90,000 miles) when VW recommends the change, so it really shouldn't be a common problem. I want to do the right thing, but I don't want to rush into an expensive repair if it isn't necessary.
View 1 RepliesTiming-belts - Belts - Chevrolet - Transmissions - Aveo :: 2004 - Won't Shift From 3rd Gear Into 4th
The timing belt broke on my aveo, destroying the engine. I replaced the engine with a used one. Now I get the car back on the road and the automatic transmission won't shift from 3rd gear into 4th. Is it possible this problem was caused when the new engine was installed, or the transmission was damaged when the timing belt broke?
View 4 RepliesPassat (B5) :: 2004 - Engine Is Backfiring After Changing Timing Belt
Recently I changed the timing belt on a 2004 Passat 1.8T and I realized I put the timing tensioner off by a few millimeters due to misunderstanding. I started the engine and it didn't sound very healthy. So I took off the timing belt and realized the tensioner was off by 8 millimeters. I corrected it and restarted the engine and it began back-firing. I re-checked and replaced the belt 3 more times and it still back-fired. The engine runs perfectly from a few seconds to a few minutes, then begins back firing and it stalls out. I had a recent post and I had suggestions to check all hoses, connections, etc. and to scan the computer for error codes. I did so and got the codes P0300, P0302, P0303, P0304. These codes mean back-fire in cylinders 2-4. I don't see any valve adjustments in the engine so could the valves be bent and do I have to replace them? God forbid D: Or do I have to reset some kind of computer code in the car or any other error that may need adjusting? All connections, hoses, wires, etc. are good. I've been a professional mechanic/technician for 25 years now and fixed cranes, bulldozers, semi-trucks, and anything else you can name that has wheels and is land based, all sorts of engines, gas, diesel, ethanol, you name it... I also worked on several VW's, including my own, and figured this V-Dub would be a walk in the park , but it turns out this Passat is the most complicated thing I've worked on in my life!
View 8 RepliesCamry :: P1351 After Changing Timing Belt?
I recently changed the timing belt on my 2001 Avalon. I am now getting a P1351 code. I removed the timing belt covers and checked the marks, and everything lines up perfectly. I have checked this twice now. To give a little background, before I changed the timing belt, I was getting P0300, P0301, P0303 and P0305 codes along with a P1349. Upon looking up the codes, P0300 indicates a misfire on multiple cylinders, with P0301, P0303 and P0305 indicating misfires on cylinders 1, 3 and 5. The P1349 indicates a variable valve timing issue on bank 1 (cylinders 1, 3 and 5).
I had already changed all 6 coil packs and fuel injectors and spark plugs within the last year (iridium plugs), so I pretty much ruled out any of those. And since the valve timing code was on the same bank as the misfires, I figured that was the cause of the misfires. The oil level was fine, and it hadn't been all that long since I had changed oil. So the next possibility was the solenoid. I changed both of them. Since it was due for the timing belt, I decided to go ahead and change that too. Now, the P0300, P0301, P0303, 0305 and P1349 codes are gone. But after a day or two, the P1351 shows up. As I mentioned earlier, I took the timing belt covers off and checked the belt and alignment marks. All was perfect. I cleared the code. Within a few minutes of driving the code comes back. I checked the belt alignment again. Not loose, and marks line up perfectly. The car runs smooth as can be. I do notice that there is valve clatter on Bank 2. It sounds kind of like a diesel. But it is running smooth. It is also interesting that the original valve timing problem was on Bank 1, but the valve timing problem now is Bank 2. I have only driven it a few miles since the belt change. That's all it took for the code to come up.
Passat (B5) :: Car Died After Changing The Timing Belt
OK, so yesterday I changed my timing belt and all new components. I started the car before completely reassembling everything (bumpers, etc.) and it ran a little rough at first, then smoothed out. But this only lasted a few seconds and then it died out. I thought not much about it and finished my reassembly. Afterwards, the car would crank and crank and finally start. However, it would never idle smooth and it stalled out only after 1-2 seconds.
I did some investigation, and found the plugs all had wet oil on them. Changed them out and tried to start car with same results. Looked again at the plugs and they weren't as oily, but on their way. I looked all over for a source of this problem and found a broken "pipe" on the passenger side of the engine. It is black and sits behind a heat shield, directly under a larger black pipe. They both run from front to back. I think the broken one might be a vacuum line of some type, although when I plug it, nothing happens.
My fear is that I botched the timing belt job and subsequently, bent a mess of valves. But, I'm holding out hope for another cause of this dilemma. What is the smaller black tube/pipe on the side of the intake? The broken piece comes off a 90 degree elbow pointing to the ground. I'm guessing it was broken before the timing belt job, but who knows? Perhaps I broke it when I moved the radiator into service mode. Could it be part of the turbo? I thought that might cause the rough idle and stalling.
Oh, one other thing. When I last tried to start the car, I got a flashing "STOP" on the instrument panel, followed by something about the oil. The oil words only appeared for a split second before going away. Not even long enough for me to read the whole sentence.
Passat (B5) :: 2000 - Changing Timing Belt?
I got 102k on my 2000 1.8T Passat, ATW engine code. I'm thinking about changing the timing belt. Is there any way to check if it was done before. How to recognize factory timing belt?
View 9 RepliesVolvo :: 1991 Turbo 740 - Changing Timing Belt?
I am acquiring a 1991 Volvo 740 Turbo and am concerned about the need to change the timing belt. The seller does not have record of it being changed since he had the car for two years. He had only put about 10,000 miles on it since he had acquired it. It now has 186,000 miles and runs perfect and basically in good shape for its age. If the belt breaks does it ruin the engine?
View 2 RepliesJetta - Volkswagen :: 2002 - Changing The Timing Belt?
I drive a car I am extremely reliant on. I don't have money to buy a new one and I may be a bit over protective of this car. It is in excellent shape, I bought it with 96K and whoever owned it took good care of it. I changed the battery pretty much right away, and the auto parts store guy said it looked like it was the original battery. So I suspect the timing belt is original too, (along with the clutch, which works great BTW). I don't know anything about cars short of what I have heard on CT, but it seems there is a trend towards having to change the timing belt at 80-90K And I know that a worn out timing belt can have no symptoms and essentially ruin your car if it breaks.
I took my car for the blue plate special, and it has been to the dealer a couple of times for some repairs where they also do the general service and see if they can find something to charge me for and in all cases, my car had nothing they would identify and repair. Fluids are good air filters are good etc. When I took it to the little shop on the corner I got the same report, and when I picked it up I asked, well how does the timing belt look? And he said. I can't tell you, you would have to take it apart to find out. So my questions are, as I do not know if the timing belt has been changed by previous owners. should I just go for it and have someone change the timing belt as part of my regular maintenance plan now, or is there some nifty way to find out if it needs changing without having to spend an arm and a leg?
Golf V R32 :: Timing Belt And Chain Changing Kilometers?
Looking for info if the R32 has a timing belt or is it a chain and at how many kilometers shows it be changed.
View 5 RepliesToyota - Camrysolara :: 2005 - Changing Out The Timing Belt At 66,000 Miles?
I have a 2005 Toyota camry solara with 66,000. Does the timing belt need to be done now due to age of the car?? Or wait alittle longer?
View 4 RepliesPassat (B5) :: 2001 - Changing Timing Belt / Testing Damaged Valves
So, I got a 01 b5 1.8 5spd given to me was broken timing belt. The car is super clean with 226k on it and had been well-taken care of..oil changes Mobil 1 and such. the owner just got his $$ worth and drove it till the belt went, slapping then towed it to my shop. It did not overheat and he was not driving it hard. Now here is my real question...apars lapping on a new belt and crossing my fingers, what testing can I do to check and see if there are any valves damaged? Can't I do a compression test w/out the valve train in time right? Also, if there does happen to be head damage. I would be in the market for an AUG head, unless it's just a valve that can be replaced....
View 6 RepliesHonda - Accord :: 1997 - After Changing Timing Belt CEL Flashes / Won't Shifting Properly?
I took my 1997 Honda Accord with 97,000 miles to the Honda dealer for a 90,000 mile service and changing of the timing belt. I also had them replace some gaskets, some other belts and the axles as they were not holding fluid. When I got the car back the second time I drove it the check engine light came on and the car will not shift gears properly. When I start the car cold, put it in drive and accelerate the engine revs for a few seconds before the gears will engage.
This continues whenever I stop and accelerate. It also happens whenever the car is ready to switch to a higher gear. The engine revs past 3000 rpm and then will shift a second or two later. The dealer says I need to change a rebuilt transmission. The Bluebook on the car is only about $3000. I'm having difficulty evaluating the best course of action. What is the reliability of a rebuilt transmission?
Silverado :: 2004 - Low Frequency Grinding Noise When Changing AC Settings
My '04 Silverado makes a weird noise when switching it on or off. It also makes the noise when switching between floor and dash vents. Best way to describe it is a low frequency grinding sound. I'm not talking about the clicking sound that seems so popular with this model truck. It has that too, but this is something different. It does it every time I change a setting on the AC. It does not occur when changing from cold to hot.
My truck also has the issue where it will blow cold at first then blow hot air just on Driver side. Turning the truck off then on seems to fix that.
I've googled around but don't know enough about HVAC systems to know exactly what to search forand how to fix it?
Ford - F250 :: 1976 - Replaced Hoses / Belts / Water Pump / Fan Clutch - Flowed The Radiator Still Overheating?
I have a 76 f250/460 engine. I have replaced the hoses, belts, water pump, fan clutch, flowed the radiator and it still overheats.
View 4 RepliesHonda - Element - Belts :: 2004 - High Pitched Noise Similar To Drive Belt Slipping When AC Compressor Cycles On
I have a 2004 Honda Element and when the AC compressor cycles on it makes a high pitched noise similar to a drive belt slipping. The AC is still cold and the noise is not overwhelming (yet). I know this vehicle has a serpentine belt and that doesn't appear to be making any noise. The only noise is when the compressor is running.
Is there a belt that drives the compressor (other than the serpentine)? And, is this something that I should get fixed ASAP or can it wait until my next oil change? Meaning, if I wait until the oil change (under 1,800 miles) will hurt anything?
Subaru - Forester :: 2010 2.5X Automatic With Timing Belt Or A Timing Chain?
I was thinking about checking out the above vehicle at my local dealer (Chevrolet). They're asking 15.9k and it has 57k miles. I need to know if it has a timing belt or a timing chain and how reliable is the engine/transmission.
View 1 RepliesPhaeton :: 2004 V8 Timing Belt Loose
I was told by VW service that my timing belt is loose and needs to be changed. Is it possible to know that without taking things apart? The belt was changed at 80k miles. The vehicle is at 132k miles now. Its a 2004 v8. the quote is $1400 which I suppose is in line with what these cost but I'm wondering if I can wait until 160K before changing it.
View 9 RepliesVolvo - C70 :: 2004 - Need To Replace Timing Belt
I purchased a 2004 volvo c-70 with 35K miles.The manual says to replace the timing belt at 100k or 10 years.With such low miles do I need to replace it in 2014?
View 6 Replies