Santa Fe (CM - 2007-12) :: 2009 GLS Parking Brakes Not Fully Releasing
We have a 2009 GLS AWD 3.3l and recently discovered that the parking brake was not fully releasing. We watch our mileage quite closely with the obc and it wasn't seeming quite right. A quick check of the rear parking brake drums showed that they were hot..as in not red hot but too hot to touch. The cure seems to be to work the parking brake pedal up and down fast and many times to 'free up' the mechanisms....this we now do after each time we use that brake. Sadly it is necessary to use it from time to time or like all parking brakes, it would become dysfunctional. Just a tip for those who may wonder why their good mileage suddenly went bad.
View 4 RepliesPrius (2010-12) :: Car Wouldn't Go Into Reverse After Releasing Parking Brake
Today I stopped at the post office to check my mail. I put the car in park and didn't shut off the engine - this is what I always do. When I returned a few moments later the car would not go into reverse (this was after releasing the parking brake) and the traction control symbol came on. The car would go into drive but that didn't work much as I was up against a hill (or almost against it). Shutting the car off and turning it on again solved the problem. The parking space was badly potholed; I'm assuming I had less than full contact on one wheel which caused the traction control to kick in which prevented reverse from engaging. And to be clear - it's not that it went into reverse but didn't go anywhere; reverse simply wouldn't engage (I did not try neutral),
View 13 RepliesAccent RB (2012+) :: 2013 - Car Rolls After Parking / Clunking Noise While Releasing Brake From Stop
2013 accent auto My car rolls noticeably after parking unless the ground is completely flat. Parking brakes prevents it from rolling but I don't use parking brakes every time. Another brake problem I have is thump or clunk noise I get whenever I release a brake from stop.
View 12 RepliesPrius (2010-12) :: Parking Brake Sticking - Noticeable Noise When Applying Gas?
I always apply my parking brake whether im parked on an incline or not. Sometimes if I disengage the parking brake, and set my car in Drive on a flat surface, my car does not advance (I'm not pressing the gas). This tells me that my parking brake is sticking! If I apply the gas slowly, I hear the brakes "clunk" off and I finally get going.
View 4 RepliesBrakes - Civic - Honda :: 1999 - Parking Brake Won't Fully Disengage?
The parking brake on my 99 honda civic won't fully disengage. If you use it when you go to put the lever down it pops back up slightly. Just barely one click and sometimes not even that. I just replaced the rear brake drums, shoes, wheel cylinders, and it was badly needed. I thought that this would solve my parking brake problem as well, but after I got everything back together and the car on the road the problem persisted.
I saw in the Hayne's manual for the car the parking brake can be adjusted from underneath the armrest. So would an adjustment fix my problem? If loosened would the brake stay down when not in use and still work when I need it? I also saw as part of the procedure the manual has you put the rear end on jack stands. If you are just tightening or loosening a cable why would the back wheels need to be off the ground? Is this absolutely necessary?
Prius (2004-09) :: 2007 - Park On Flat Surface With Parking Brake Fully Engaged - Car Won't Start?
I have an 07 Prius that's been going great for me. About two weeks ago I get this strange error message about my P Lock mechanism and how I need to be parked on a flat surface with the parking brake fully engaged. The car wouldn't start, just a bunch of warning lights. Finally I replaced the 12v battery at the dealership.
View 8 RepliesFord 6.7L Power Stroke Diesel :: F350 - Rear Parking Brake Sticking / Wheel Started Smoking Severely?
A few weeks back my rear drivers side wheel started smoking severely...when I stopped you could smell the brake material, feel the heat coming from the wheel, and lots of smoke. I speculated it was the parking brake that got hung up. I jiggled that cable around and then went around the block - no issue. Note: I did not leave the parking brake on.
It happened again a week later, but not as bad. I took it into the dealer today. They said heat was evident as it burned off a sticker on the disk or caliper hsg area. They have not determined yet if it is parking brake or caliper?
Phaeton :: Parking / Emergency Brake Warning Light
There are a few threads on a sticking parking brake resulting in the warning light remaining on. Mine has developed to a stage that it requires a toe under the foot pedal every time to silence the alarm.
I finally stuck my head in the footwell this morning to look at the mechanism, expecting to see a strained spring. However there was no spring in evidence and I saw that when the parking break is released, the cable remains with some free play above the contact point with the pedal: i.e. there is no tension on the cable when the pedal is released, there is about 15mm of "free cable", leaving the pedal almost "floppy".
Observations
1) The pedal has no spring to return to it's correct position. Based on self study guide SSP_277 this is not as it should be as on page 37 this discusses a spring mechanism in the pedal
2) I would image there should be tension in the cable even when released; I feel the rear mechanism requires inspection as there are springs there.
3) While the parking brake works fine, It has a lot more travel that it previously had. Thus something is worn, stuck, or the self adjusting mechanism is not working.
4) For the record, car has 110K miles, the temperature is above freezing, the behaviour is not weather dependent and the parking brake has been routinely used (2008 car).
5) My recollection from new is the parking brake was released with a significant spring action: quite abruptly.
Phaeton :: Parking Brake Pedal Stuck / How To Release
This morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesFord 6.0L Power Stroke Diesel :: Driving With A Sticking Turbo / Sluggish And Smokes A Lot
I've come to the conclusion that after 300,000 miles my turbo is sticking. I need to drive the truck up to my mechanic but he's 50 miles away 90% highway (really don't wanna pay the towing bill) would this hurt the truck any more or would it be okay? If it will hurt the truck more I'll get it towed but I'm trying to avoid that at all costs. I have drove it since the turbo began to stick but it is very sluggish and smokes a lot. As soon as I let off the pedal boost immediately drops to 0 psi.
View 3 RepliesTouareg :: When Parking Brake Released In MFI Got Warning Parking Brake Fail To Release
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesPhaeton :: Latch On Hood Not Releasing All The Way
I had problems this morning opening my hood, the latch was real tight so pulled it and it released but not all the way. I tried opening the hood but it's stuck and won't even closed either. It's there a trick or some other lever I'm missing? I never had to do it before.
View 1 RepliesPhaeton :: 2006 - Glides To Right When Releasing Steering Wheel
(2006 Phaeton) When driving down road car glides to right when releasing steering wheel. Dealership performed alignment and all checks out good. Has 2 makes of tires on each axle and they mentioned previous owner had directional tires going in wrong direction. Is it the tires?
View 7 RepliesFord Excursion :: 2001 - Front Brake Sticking - No Power Assist - A/C Stays On Defrost - Brake Booster?
I have a 2001 ex. 4x4 6.8 v10. I have been having vacuum issues and brake issues lately. My front brakes seem to be sticking, some times they drag some times the don't squeeze when I step on the brake causing uneven wear and pulling when I stop. Also feels like I have no power assist. I also have a vacuum issue with the auto setting on the hubs, they don't engage I have to manually lock them and sometimes my a/c stays on defrost. And my cruise control doesn't work, the light comes on and love done the self check but it doesn't show anything is wrong. Could I have a bad brake booster?
View 5 RepliesPhaeton :: Headlight Washer Covers Not Retracting Fully
The bumper cover on my car was replaced due to deer damage. I just noticed the headlight washer covers don't retract themselves all the way unless I give them a little push by hand. Can this issue be fixed?
View 1 RepliesPhaeton :: Wind Noise At Speed When Window Is Fully Up
Problem I've been having with my front passenger side window. When the window is fully up, there is some very noticeable wind noise at speed which then goes when the window is moved down a fraction. Whether this a problem that's easily solved or whether it's going to require lots of fiddly work by the service technicians?
View 8 RepliesPrius C :: Clicking Metallic Noise Up To 1 Second After Releasing The Brake
I should probably arm myself with a sound clip, you can hear it with radio off windows up, but more prevalent outside or windows down. whenever I stop and release the brake, there is a metallic clank noise that is heard outside the car. now I didn't want to bring it up to the dealer, but at my last service interval, I test drove a brand new Prius C and I could not duplicate it. So I don't know if its something that developed after it brakes in and is normal.. The prius C I test drove was utterly quite going from brake to gas until the point the whirling sound starts. mine has a metallic clank and it usually is not immediately as I release but within a second, and I thought maybe it was a change in the regen system, but now I am more curious as a brand new one did not make that sound.
View 4 RepliesNissan - Murano :: Brake Squeal When Releasing Pedal
I have a 2005 Murano, 96K.
In Aug 2011, I had the rear disc brakes/rotors replaced. Front ones were replaced in Feb of this year.
For the past month, whenever I release the brake, I hear squealing (no sound when I press the brake to stop). Last about 5 secs, or until I hit about 15-20 MPH. Seems to happen only after the brakes heat up. I've tried to "Google" the answer, but the answers are mostly for drum brakes.
Accent MC (2006-11) :: Brake Squeak When Releasing Pedal
Started a few months ago didn't really bother me until now. Started when I would forget the parking brake is on and would just put the car in reverse & wouldn't move until I released the parking brake. Did it about 5-7 times and now every time I brake without the parking brake on, it squeaks & is really annoying. Is there any way to fix this or is it just gonna be complicated & expensive?
View 10 Replies