Lexus RX 2010-15 :: Difference Between Hitches And One Hole / Two Hole?
I've looked at [URL] at the three primary hitch receivers for the 2013 RX 350; Curt, Hidden, Draw-tite.
From the side profile picture which etrailer displays for each, the Curt has one hole and the other two have two. Those two appear to be different sizes. The one on the Curt seems to appear smaller than the larger of the other two holes on the other two hitch receivers.
I called etrailer and the person I spoke with could not tell me why they were different, they just read the specs I see on the page, tongue weight, load, blah, blah.
With my hitch, I will need to haul a Yakima trailer, about 450 Ibs total, it is a very lightweight trailer, or a 2" Yakima bike rack. Maybe some day, I'll need to haul something of substance, but I have no plans.
I'm also wondering if a hitch which is recessed back, will it be difficult to work the pin in and out?
Ford 6.7L Power Stroke Diesel :: Fifth Wheel Bed Mount Hole Cover / Pucks
I was looking for something to cover the four holes in the bed that my fifth wheel hitch fits into. The hole size is 2 inches. What is the diameter of the ford OEM pucks that come with the fifth wheel prep package. By the way I really like my new 18K pull-rite super glide hitch worked great my first trip with new fifth wheel. Pulled about 13000 lb trailer on 1200 mile from central California up to Grants Pass, Oregon and back down the coast. I used 93 gallons and got an average of 12.3 mile per gallon. Truck worked like a charm. No issues.
View 14 RepliesFord Super Duty (1999-2016) :: Brake Line Going To Rear Right Wheel Has A Rusted Hole
On my '97 F250 the rear brake line going to the rear right wheel has a rusted hole. It measures 50" total. Instead of bending a new metal line. I see they have a "poly armor" line that can be bent by hand( no tools needed). I see Autozone has them.
View 14 RepliesFord Excursion :: Brake Line From Front To Back Has Hole?
I have a 2000 ex v10 4x4 the brake line that goes from the front to the back has a hole in it and is rusted out. I need the part number?
View 6 RepliesFord F-150 (2009-2014) :: Heat Shield Under Oil Pan / Front Hole Ripped
This fiber material doesn't hold up to mud and sand very well. So much so, that the front hole ripped through. It won't stay fastened. I have all of the twist bolts still. Looking for a way to fix the shield so it will hold. I tried exposing a washer to it, but the epoxy doesn't like the material very well. I know the owners manual says to remove the shield if you are going to be off roading, but I hesitate to leave it off 100% of the time.
View 4 RepliesPassat (B6) :: Hole In Driver Side Glove Box
Before i bought this car i thought a vw nut owned the car but now i'm certain. when i lowered it the other weekend i learned some things.
-k&w shocks in the rear
-frame notch up front with brackets welded inside the wheel arch to hang air lines
-a nice little hole in my driver side glove box where the height controller was probably mounted
Passat (B6) :: Stripped MAF Sensor Hole On Intake?
I stripped the MAF sensor hole on my intake. Any recommendations on how to fix this? Do they make tread inserts that small for that type of thread? I was thinking about jamming some JB weld in there and drilling/tapping that.
I know that unmetered air can get in there if it's not tight so I tried to carefully seal it up with some rtv for now.
Ford Super Duty (1999-2016) :: Knocking Noise On Right Front When Hit A Hole
Have a knocking noise on my right front when I hit a hole or when the wheel comes up like when I turn I to a drive way that has a little hill the right tire hits and I hear a popping Boise sounds like its under the truck but I can't place it? I have a 2003 f250 crewcab 4x4 with 6.0 and 6inch lift with 37 inch tires....
View 3 RepliesFord Transmission :: Front Diff Capacity - Fluid Level Up To Fill Hole?
I have a 2002 F250 SD 4x4 w/5.4. I drained the front differential gear lube and refilled with 2 qts of gear lube as specified in my owners manual. Actually the manual says 1.8l / 3.8 pts. The fluid level is not up to the fill hole and if I stick my little finger in the hole I can barely get any on the tip of my finger. The owners manual says these capacities are for F250/350 w/ Dana 50 axle. It then says F350/450/550 capacity as 2.7l / 5.8 pts with a Dana 60 axle. My question is should the fluid level be up to the fill hole, as with the transfer case and rear end levels? Could I have a Dana 60 with the higher gear oil capacity in my F250? Whats the proper gear oil level?
View 4 RepliesPassat (B7) :: 2012 - Water Leakage But No Hole Found
We have water leak issues for close to a year now, very frustrating. Not heard much of B7s leaking so I thought I'd stop in here and check it out. Great car to drive, only other issue we've had was the cold weather inactive drivers door lock as seen by many others.
View 3 RepliesPassat (B5) :: 2003 - Sound From Right Front Wheel
2003 GLS 1.8 wagon, 70k miles
I am getting a sound from the right front wheel that is related to the rotation. I know it is not tires because I just got new tires and it was there before and after. It kind of sounds like a very faint ...vump vump vump vump and speeds up as I go faster. Maybe a wheel bearing?
Passat (B5) :: Sound Like Missing A Muffler - Hole In Catalytic Converter
I have a big hole in my catalytic converter and the car sounds like it is missing a muffler. Where I should go to have that hole welded as i do not see myself spending ~700 to get a new one for Passat 2003.
View 24 RepliesPassat (B6) :: Excessive Heat Under Dash - Large Hole In A Grommet?
Getting stupid amount of engine heat on legs? I feel like I'm straddling the manifold sometimes.
Only thing I can think of is that I've got a large hole in a grommet or something?
Passat (B5) :: Knocking In Front When Wheel Was Turning Either Left Or Right
In July I noticed there was knocking in the front left wheel when that wheel was turning either left or right AND went over slight/heavy bumps..it sounded like some metal knocking....i had my mechanic put the car on the lift to check for any VISUAL problems, and he didnt find anything wrong...said it was probably the bushings inside...so yesterday the knocking got much worse and the ride sucked...so i put the car up again and found out that the left axle needed replacing, which i did..so the harsh ride went away but the left wheel knocking is still there...WHAT COULD THIS BE?? Im thinking that maybe it was this problem that caused my axle to break... [IMG] [URL].....
View 5 RepliesPassat (B5) :: Clicking Noise From Front Driver Wheel
Over the last few days I've noticed a clicking noise coming from the front driver wheel. This clicking has been getting louder, everything seems in check, no crazy vibrations, or vering side to side and all lugs are tight. The clicking stops when the break is applied, could this be break pad warning chippers? I have yet had time to take wheel off and look.
View 6 RepliesPassat (B5) :: Clunk / Rattle In Front Right Wheel Area
2000 Passat Wagon, 4-motion, 116,000 miles. I have a clunk/rattle in the front right wheel, and the clunk manifests itself when I roll over a bump. I don't get the same noise from the left side.
For example, turning right into a parking lot and rolling over the curb creates a clunk that I do not hear from the left side. Rolling over a manhole cover - clunk.
I've had it in for several other non-related service visits, and have asked the tech's to diagnose. Most recently, I got sold a new steering rack to resolve the issue, but it did not.
Again - I just replaced the steering rack. The techs have eliminated ball-joints and control arms as the source.
Passat (B5) :: How To Remove Front Wheel Bearing Clip
I am in middle of "trying to" change the wheel bearing and I have the hub out but I can't figure out how this bearing needs to come out.
I have done it on MKIV Golf and like most other cars there is a C clip, but i can't see a clip in this knuckle.
Is this thing press fit in there without a clip? I have seen a guide for MKIV Jetta and people say Passat is almost the same, but not until I find this C clip.
Passat (B5) :: 2000 - Front Wheel Bearing Replacement
I m about to replace the front wheel bearing of my 2000 1.8 t I already rent the tool (hub and bearing puller and installer) from german auto parts.com but looking for pics of step by step of the process before starting the job.
View 4 RepliesPassat (B5) :: Front Left Wheel Bearing Replacement?
I have a 2000 Passat and brought it to a local shop to have the left front wheel bearing changed. He took the car apart and said he couldnt do it because the anti lock brake wire ran threw the control arm and had no plug on it and was wired right to the dash board. Should i find a different place to take it to or is it a dealer required fix. Can i buy the bearing myself and change it?
View 1 Replies