Passat (B6) :: High Beams Are Not Working
I have a b6 Passat and the high beams are not working. I am going to be installing HIDS in the next week or so so I located a vag com disabled the drls and enabled Xenon without the shutter. now no high beams. they will only work with the car off and pull back the switch instead of pushing it forward.. I'm sure there are ppl on here with HIDs and there high beams working on a b6.
View 9 RepliesPassat (B6) :: High Beams Don't Stay On
My regular beam light stopped working today. If i pull back on the high beams, both come on and work, however, if i push the lever forward to leave them on permanently, they don't come on at all. Is this because the regular bulb is out, or is something else wrong?
View 6 RepliesPassat (B6) :: High Beams / No Light On The Road
The adjuster is located for the high beams, on the B6. Dealer adjusted the low beams, on the wagon yesterday, on third visit, and now the high beams are looking the space station. No light on the road. So, I thought I would lower them instead of going back to the dealer.
View 3 RepliesFord Super Duty (1999-2016) :: Truck Only Has Low Beams / No High Beams
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: High Beams Only And No Low Beams After Installing New Headlight Bulbs
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
Ford F-150 - 1997-2003 :: Low Beams Don't Work But High Beams Do
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesPassat (B6) :: High Beams At Lower Percentage For DRLs?
Can I change the coding to run the High Beams at a lower percentage for DRLs? Is this possible? I have a feeling its not but just wanted to ask around.
View 7 RepliesPrius (Gen 3) :: 2010 - Only High Beams Works / Low Beams Out
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
Golf IV / Jetta IV :: Low Beams Went Out / High Beams Functional
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
Accent RB (2012+) :: Low Beams Stay On With High Beams
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
Ford Wiring/Electrical :: HID Low Beams But No High Beams
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 RepliesPassat (B6) :: 2007 - Bi-xenon High Beams Aren't Working On One Side?
I have an 07 with the AFS lighting. bulb error on dash- as I understand it, this has to do with a faulty shield for the high beam on the passenger side. Can this be repaired? Or should I just shell out the 300 for a used one on ebay.
View 3 RepliesPassat (B6) :: Ignition KEY Fob Coding?
I bought a fob from eBay.. but I couldn't find anywhere the coding procedure.
View 4 RepliesPassat (B6) :: Instrument Cluster Coding Causing ABS Module To Throw Codes
I'm set on having the European parking light feature (when the car is parked and you walk away from it). For those of you not familiar with it, by changing the Instrument Cluster coding from a 2 (USA) to either a 1 or 4 (UK or Great Britain), you can turn the car off, hit the left turn signal assuming you are parked on the right side of the street, and after getting out and locking it the 194 amber front bulb and the LED red rear ring stays on. This aids in traffic seeing your car parked on the side of the road.
Problem is that once you change the country, you get this in the ABS Module:
Address 03: ABS Brakes Labels: 3C0-614-095-C2.clb
Control Module Part Number: 3C0 614 095 S HW: 3C0 614 095 S
Component and/or Version: ESP 440 C2 H015 0004
Software Coding: 0013752
[Code] ....
What changes need to be made in this module to avoid this? The pop-up window in the coding section doesn't say anything about different countries so I'm not sure which numbers need changed.
Golf/GTI VII :: Fog Lights On With High Beams?
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 RepliesGolf/GTI VI :: Fogs Don't Go Off When High Beams On
I did some VAG COM work today. (Comfort Blinker, fogs as DRL, Needle Sweep, Auto Lock/Unlock, Remote Windows, Fogs as Corner lights, Fogs don't go off when high beams on). I am using a Hex- Can cable that is approx. 1 year old. These are the malfunctions I am getting with the VAG Com
01-Engine -- Status: Malfunction 0010
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
[Code] ....
Prius (Gen 3) :: Name And Purpose Of Bulbs Right Above High Beams?
I don't know the official name, but it's right above the high beams, it stays lit if you just have your side lights on too. BTW, what's the purpose of it since we really don't have DRL's?
Modifying it with a different bulb, if so what's the size? Same ones as the interior map lights?
Camry :: 2010 - How To Keep Fogs On When High Beams Are On
I know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 RepliesCelica :: Headlights Adjustment - High And Low Beams
I just bought our 1st. Toyota 03 celica GT 5speed.113000 well cared for miles. My biggest concern is the headlight adjustment. The high beams are similar to aircraft landing lights but the low beams seem to cross with the left side too far to the center. I found the up-down adjuster (wish it had the cab operated feature) but can't find the left-right adjustment.
View 3 Replies