Golf/GTI VI :: Gauge Not Reading Full Boost After VF Intake Install
I installed a VF intake a few weeks back and noticed my car is peaking at around 14-15 PSI max according to my boost gauge, when it used to hit 17 peak. I'm not sure if I may have a leak nor have I checked it via vag-com.
It does feel a bit off, but for as far as I know the gauge could be messed up now.
Just wondering if there would be any immediate signs (sounds etc...) of whether there would be a leak, or what other problems may cause this.
Tiguan :: Fault Codes After Battery Removal To Install Boost Gauge
Removed the battery to install a boost gauge and came back to a christmas tree cluster. Not just the usual steering/EPC either. I can post the expanded scan but you can see a lot of things are affected, still drives fine however. Airbag fault and parking brake fault appear on MFD as well.
Thursday,07,May,2015,15:43:55:18277
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 14.10.2.0 (x64)
Data version: 20150311
[Code] ...
Passat (B5) :: RPM Drop After Boost Meter Install
I just installed a Prosport Boost Meter in my automatic B5. Pics included of the vac line I spliced into and everything. The meter works perfectly fine (though I'm not boosting as much as I'd like ).
I've noticed a decrease in my idling RPM and when I let off the accelerator and come to a stop, my RPMS drop incredibly low, to about 600, and recover to my new normal idle of about 900.
Any explanation for this or things I should be worried about, or is that just the nature of the beast?
Passat (B6) :: Boost Gauge Fluctuating And Does Not Hold
When I give my car some gas my boost gauge fluctuates a lot and doesn't hold, I have an OEM piston style dv revision d I believe, and I have a catch can and also a blow off valve, and I'm stage 2. I was thinking of getting an awe diverter valve?
View 13 RepliesPassat (B5) :: 1999 - Manifold To The DV Is Cut - Boost Gauge?
I just purchased a b5 99 1.8t. The tubing from the intake manifold to the dv was cut by accident (long story, dont ask).I replaced the dv and tubing .I want to check if the psi is correct. I dont have a boost gauge.
What are the ways to check it besides a boost gauge? I think the correct psi is around 6-8 ?
Passat (B5) :: 1997 - Boost Gauge Needle Is Jumping
I have a strange problem, my boost guage needle is jumping like crazy, there is no vacuum leak and the max boost i get is 0.5 bar, when the guage needle is not jumping I get a boost of 1.4 bar. I have mechanical boost control.
97' passat B5 1.8T AEB with FMIC,K04-15,2.75",chip (that was made for the original k03).
Passat (B6) :: Installation Of A Boost Gauge And Steering / Column Pod?
The installation of a boost gauge and steering or column pod? I'm looking at installing the Podi Gauge for the MK5 - but I understand it needs some modifications to make everything fit correctly?
I searched but couldn't find the exact answer I was looking for - besides a retrofit to the pod, is there some drilling / t-fittings required for the actual install of the gauge? As far as I understand, it's a bit more involved than plug and play?
Passat (B5) :: Turbo Surging - Boost Gauge Will Jump From 12 - 17 Just Back And Forth
I just bought a 98 passat 1.8t manual trans, its has 105k on it now, I am having a problem with the turbo surging. I am running about 17 psi however every now and then i can put it to the floor and my boost gauge will jump from 12-17 just back and forth, I also have a prob every now and then where it will only build 4 psi and stay there i can down shift take my foot on and off the gas and still no change then just all of a sudden 17 again both these probs are intermittent looked briefly at vacuum lines.
View 2 RepliesGTI 337/20th Anniversary :: How To Install Oil Pressure Gauge
I need to know how to install an oil pressure gauge...or what is the location on the oil filter flange where this thing gets installed...
View 5 RepliesGTI 337/20th Anniversary :: 2004 - How To Install Oil Pressure Gauge
I am wanting to install a oil pressure gauge to go along side my boost gauge in my double pod on top of my steering column, how to do this?
View 4 RepliesGolf/GTI VI :: Oil On The Hose For Boost Gauge
So popped my plastic shroud off to change my oil and thought it was strange the the hose for the boost gauge was really oily. Is it normal?
View 2 RepliesFord 6.0L Power Stroke Diesel :: Fuel Pressure Gauge Install
I finally received all the parts needed for installing my fuel pressure gauge, but I am wondering if I am going to need a schrader valve on my fuel pressure line going to the sending unit, or if I am going to be safe with just doing a 6 time cycle of the fuel pump like we do when we change out the fuel filters. Seems like that should work for getting the air out of the fuel lines, same concept I would think.
View 14 RepliesVolvo :: Boost Gauge Is Hitting Almost 1.5 Bar And Dropping To About 0.9 Bar?
I have recently purchased a c70 t5 which supposedly had been remapped. Anyway this weekend I changed the ICarScan unit and pipework, replaced the turbo vacuum lines and it has had a full service oil,plugs,rotor arm and cap etc. Prior to this it would occasionally pull aggressively and other times not. Now it boost all the time and feels good, however I noticed the boost gauge is now hitting almost 1.5 bar and dropping to about 0.9 bar. What could be causing this. In addition to the above work I removed the nasty badly modified inlet pipe and fitted an original between the air box and turbo. Which connection go where so I can ensure I am correct.
View 1 RepliesImpreza :: Stock Boost Gauge On 2002 WRX?
How accurate is the stock boost gauge on 02 wrx? is it a real boost gauge or is it just for show? 3000gt vr4 has one, but it is not a real one and work with maf sensor only. also is stock bov good for 15-16 psi. we have a stock 02 wrx and we are thinking to up the boost to about 1 bar, but not sure i can trust the stock boost gauge. the car also has catback and cold air intake on it.
View 1 RepliesGTI 337/20th Anniversary :: CEL After Installing NS Boost Gauge
I'm not sure what to make of this ... I disconnected the battery before installing . The gauge seems to be reading correct based on what i researched. If there was a slight leak would it throw the CEL ? is it maybe just a one time thing that needs to be cleared afterwards ? Car drives fine and I plan on trying to stop at autozone to get there crapo freebie scan . Kinda annoyed considering everything went smoothly up until I drove the car more then 50 miles .
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Where To Install Oil Pressure Sensor For Gauge
I need to install an oil pressure sensor sending unit. I've already occupied the 1/8"NPT test port on the rear of the oil cooler, where else might I be able to tap into oil pressure? (LPOP)
View 4 RepliesGolf IV / Jetta IV :: Boost Gauge Is Reading Peak Of About 15 - 16 PSI
Okay, here's the car
AWP 1.8t mk4 GTI.
- stock DP
- Forge 007 splitter adjusted 25 clicks
- Swiss cheese stock intake with k&N high flow
- APR stage 1 93 tune.
My boost gauge is currently reading peak of about 15-16 psi. I replaces some vacuum hoses that appeared to be worn, and to no avail. I have no CEL, and no codes thrown at all. This sound like a boost leak.
Golf IV / Jetta IV :: 2004 1.8T GLI - No Vacuum At Boost Gauge
Bought a 1.8t 04 gli. Was boosting 15 pounds so i did a boost leak test. Found pcv up hose from valve to y pipe at valve cover was almost blown in half, so i replace all of that stuff with oem.
Boost leak test again, found where boost gauge is hooked up to, turbo outlet to n75, the hose was leaking, i fixed that.
Boost leak test yet again, n75 was not clamped down, so clamped that.
Boost leak test one last time, held 10 psi before blowing the cap out of the intake. Which is pretty dangerous, my cap is made out of a spray can cut in half. Sounds like a canon. Anyways i heard zero leaks.
So now I am boosting 18psi and holding perfectly fine. Why I am showing ZERO vacuum on my boost gauge??
Golf IV R32 :: 2003 - Fitting Supercharged Boost Gauge
I live in Scotland so have a right hand drive 2003 MKIV R32. I got a VF stage 1 kit fitted last year and now I want to fit a boost gauge. I've bought a NewSouth indigo 0-30 psi gauge and a column pod.
What I need to know is where to take the feed from, where is the best place to fit the vacuum tube to get the best readings? any photos would be good.
I plan on fitting it this weekend along with my oil pressure gauge.