Maintenance / Repairs :: Loose Timing Chain Cause Engine Miss?
is it possible for a loose timing chain to cause a engine miss.
View 1 RepliesLexus GS 2013+ :: Steering Loose - Flimsy And Sloppy
For the past month or so my car is very twitchy and wanders a lot. The steering is so loose that it feels flimsy and sloppy. The front wheels grab every little rut and grooves in the road and pull my car left or right. I have to keep my hands on the steering all the time. I switched out my regular Lexus wheels/tires for my winter wheels/tires and the problem is still there so its not anything to do with the tires.
The car does not feel heavy or planted anymore. The steering feel is like an old Lexus ES from 10 years ago to be exact. At this moment I feel nervous driving the car. Never felt this way ever before.
I had my alignment done last year but haven't hit any potholes or anything. But this feeling feels like the steering pump leak, loose tie-rods, etc. I am not sure. Either way its unacceptable for a 2 year and 10 month old car with only 36k miles.
Passat (B7) :: Shuddering Sound Accompanied By Sloppy Feeling In Steering Wheel
Basically when I'm coming into my driveway (I turn to the right into it) I hit with the right front first and get this shuddering sound accompanied by a sloppy feeling in the steering wheel.
Sounds like the old door stop Springs. I sometimes get it as well when hitting bumps with either side at a time but not when hitting speed bumps or bumps where both wheels hit at the same time.
Went to the dealership but they couldn't reproduce it on the newly built read that's as smooth as glass.....
Ford Excursion :: 2001 - Sloppy Steering Wheel At 185k Miles?
I have an 01 Ex, 6"lift, 35" tires, 185,000 miles. I have gradually gotten to this point where the steering is very loose. I can roll the steering wheel back and forth with out "catching" the wheels & with the bigger tires, they catch grooves in the road & pull the vehicle side to side. I took in to a reputable 4x4 shop & he suggested the steering gear box was going bad. So I had them replace that. That did solve about 50% of the problem. So what is the next thing to look at??? Ball joints?
View 12 RepliesMaintenance / Repairs :: Turn Off AC Before Stopping At End Of Day
Missing the point about why to turn off the AC before engine....it is to evaporate the condensate in the interior air handling system so as to dry it out and prevent mold and mildew in the evaporator and duct work area!!!My wife does not like this either, but, it would be very difficult to clean out and kill a moldy mess in the evaporator and duct work. Part of this is also running the fan on a high setting for several minutes or more after killing the A/C compressor to blow things dry!
View 19 RepliesMaintenance / Repairs :: Car Is Chugging When Stopped?
Car is chugging when stopped. Changed the spark plugs and fuel filter. Still does it. Now checking the distributor. I've attached a couple pictures. You can see the brown marks. Is this a problem?
View 10 RepliesFord Super Duty (1999-2016) :: F250 - Steering Wheel Sloppy?
just bought this f250 seems to walk on the road alot, had it looked at has new balljoints, he says everything seems tight except there is lots of play at the gearbox, is it recommended to have it rebuilt or buy a reman, was told that even the reman seems to be the same way
View 14 RepliesMaintenance / Repairs :: Car Won't Start - Clicks With Ignition Off
My son's car wouldn't start after parking at burger king. In off, the car has clicks just behind the floor shifter in a black module and under and foward of engine compartment fuse block. Only way to stop clicking is to move ignition switch to another position or pull IB Battery MaxiFuse in engine compartment fuse block. No activity from car in any other ignition position. no instrument panel lights, radio.
Thought ignition switch changed it, same condition. Battery checks out good. jumpstarting even using a second ground on engine doesn't change symptom. I can't find the modules that are clicking in my Chilton manual. What are the clicking modules and how can I move forward to get the car out of the burger king parking lot?
Maintenance / Repairs :: Car Shaking After Jumping Battery
I accidentally left my car on overnight and my battery was dead in the morning, of course. I got it jumped and I drove all the way to work, but every time I slowed down at a light or for traffic the car started shaking. It has to be fairly slow before it starts happening, say 15-10 mph or lower. It never did this before the battery went dead, and it stops as soon as I gave the car any amount of gas at all. I'm hoping this is just a temporary side-effect of having to jump the battery. What the problem might be?
View 8 RepliesMaintenance / Repairs :: Oil Light Comes On After Sudden Braking
oil level checked by dipstick, a little low
View 7 RepliesMaintenance / Repairs :: Broken Wire In Door Jam?
I've got broken wires in the driver door. Do I have to solder them?
View 11 RepliesMaintenance / Repairs :: When Turn The Key No Sound Aside From Fan Turning Every Few Seconds
My car won't start! When I turn the key, the car doesn't make any sounds aside from the fan turning every few seconds. The car seems to think the engine is going. All the lights and everything turn on (they're hardly turning on now after trying to get the car running for a couple of days). All the wires on the battery and to the starter are in really good shape, no corrosion or damage or anything.
I've tried starting the car while in neutral as well, still nothing. Does this sound more indicative of an issue with the starter or with the battery? My friend and I were trying to get the starter out so I could have it tested but the bolt is on very very tight (broke a wrench trying to undo it). I want to figure out what the most likely culprit is before I go too much further. Unfortunately I'm out of work right now so taking it to a mechanic isn't really an option, but I really really need to get my car fixed.
Maintenance / Repairs :: Aluminum Alloy Corrosion Rim Leaks
Just how common is this? How much can be done about it? Is it sometimes hopeless? Surely no one ever actually welds them up and then machines them back off?
View 19 RepliesMaintenance / Repairs :: Reduced Engine Power When Driving At 70 MPH
I was driving my truck back home (70mph) and dashboard said reduced engine power so it slowed me down to 50 then 40 pulled to the side turn it off disconnect battery connected everything again turned work fine for at least 300 ft and turned off completely now it wont start... What could be ? I switch the throttle body and is not it....
View 11 RepliesMaintenance / Repairs :: Transmission Malfunction - Won't Shift Lever?
Transmission problem, will not shift lever. If car moves while on P, then the interlock will not disengage. I car doesnt roll at all it will allow me to shift gears but if the cars rolls just one inch then i cant shift gears. Already replace brake sensor.
View 6 RepliesMaintenance / Repairs :: Electrical System Failure After A Jump Start?
So a co-worker needed a jump after leaving her lights on. Her car was parked on a busy road and I had to pull up next to her in the opposing traffic lane to be able to reach her battery. In my haste I put the clamps on the wrong battery terminals on MY car (hers were correctly attached). When I got in my car to start it I could see the wires were smoking and immediately got out and disconnected the cables. We ultimately needed to purchase new cables and were able to start the car. The problem is now her radio doesn't work and when she brought it to the dealer they said there is some kind of electrical system failure?!?! Is that possible? Her car works perfectly fine, except for the radio now so not sure what happened.
View 14 RepliesMaintenance - Repairs :: Grinding Noise In Front Passenger Side?
I had my first car 3 months and every thing was going fine, this afternoon I was leaving the motorway and heard a grinding noise in the front passenger side. There are marks in the disc but the pad looks like it has enough meat on it. What is the problem? The driver's side is fine no noise. There is a bit of a lip on the disc so I think it would need changing soon but it's not that bad.
View 19 RepliesMaintenance / Repairs :: Code PO430 / Catalyst Efficiency Below Threshold
I was app. 10 miles from home & engine started missing & went into limp mode & yes the light flashed . I limped it home anyway & now have a PO430 code . # 2 spark plug died & caused this , danged plug didn't have a hundred miles on it since new . Replaced that plug & everything's fine except that code . Vehicle runs great . I've also read an 02 sensor could cause this code .
View 4 RepliesMaintenance / Repairs :: Check Engine Light On / Misfire On Bank 1 And 2
Change out the penlum gasket and now the check engine light came back on and the codes are 301 and 302 miss fire on the bank 1 and 2. not sure what it is now. mechanic is lost...
View 14 Replies