Lexus LS 2007+ :: 2008 LS460 Navigation Displaying Unable To Read Data Message

My Navigation started to display a message "Unable to Read Data" and would not display the Map on my Certified 2008 LS460. All other displays worked just fine and there were no other problems with my Navi. This had been an intermittent problem for a while so I decided to bring it to Pohanka Lexus in Chantilly, Virginia. I paid them $130 to diagnose the problem for them to tell me that I need a new Navigation ECU - which at first they quote $15,000.00 I FLIPPED! I let them know that I would deal with not having a map and navigation and got my car back!

When they gave me my car I started it up to see the wrong time displaying on the clock and a message that reads "A program cannot be read. Please consult to a dealer" displaying on my screen. I immediately got my SA out there to look at the message. He tried to tinker with all the buttons and couldn't get the message to disappear so he brought his supervisor to look at the message.

They explained to me that when diagnosing the problem they tried to reset the system by removing by battery and it didn't work (Yeah, Actually it made things worse!!!) and now it is evident that my ECU has apparently completely died (and I find it such a coincidence that it happen to die while in their hands diagnosing the issue). They took the car back to see if they could do anything to get it back to the state it was in when I brought for diagnosis.

View 14 Replies

Lexus GX 2004-09 :: Navigation Screen - Unable To Read Data

Yesterday as I took off for work, I noticed no map on my nav screen. Below is the message I am getting. This is a 2004 and my guess is the nav has never been updated. I bought the GX 3.5 years ago as a CPO.

View 9 Replies

Camry :: 2007 Navigation Screen Error / MAP DVD - Unable To Read Data

My new '07 Camry with 5K miles on it, driving along, minding my own business. The navigation was on as it always is, but not in guidance mode. All of a sudden I notice the screen turn dark and I see this error: "MAP DVD - Unable to read data. Check if map DVD is correct." (see image)

I have never removed the DVD from the drive. It is clean as a whistle. I wasn't on a bumpy road. I tried resetting and cleaning it, but no good.

View 9 Replies

Lexus SC430 :: Navigation System - Unable To Read Data / Check If Map DVD Is Correct

Navigation system has been working fine and then today if get a screen that says:

"Unable to read data - Check if map DVD is correct"...

View 5 Replies

Lexus ES 2007-12 :: 2008 ES350 Navigation System Outage / Program Cannot Be Read Message

We bought our ES350 used a number of years ago. When we changed the battery, the Nav system no longer worked and a " A program cannot be read. Please consult to a dealer." message appeared. Am I wrong to assume that the loss of power from the battery swap caused the software to dump from the system and there was no disc installed to "reboot" the system? All I need is a disc and the system will restore? If so will an "update" disc work or do I need an original "program" disc?

View 1 Replies

Prius (Gen 3) :: 2010 IV Navigation Unable To Read Disk

The car has been parked for a few months and i get into it and the navi reads unable to read disk? So I eject it and its perfectly clean. I give it a wipe down just for good measure and slap it back in. after a few minutes and some hesitations it works fine.. Then it happens again like 20 miles away, just goes black and says unable to read disk then comes back on again by itself.. Would a newer updated disk work? I have 90k on it and this is the first time I've ever removed the nav disk, could the lens be dirty..

View 4 Replies

Lexus SC430 :: 2002 - Navigation System Shut Off / Cannot Read Disk

My navigation system just shut off and the screen reads" can not read disk" . Any solution for this problem?

View 3 Replies

Lexus GS 2013+ :: Navigation Screen Totally Blank - Unable To Turn On Audio

Big navigation screen it totally blank. Not able to turn on radio. When you start the car you see Lexus logo, then you get warning text after this text its completely black. Backups camera is working and small screen is working. I looked at Navigation fuse, TV fuse they all look good.

View 2 Replies

Lexus LS 2007+ :: Data System Lowering Module

I have just installed my data system lowering module.

I bought a used one and it appears to be lowering and raising the car.

It does not seem like all 4 corners are even. I don't have the instructions on how to reset or play with the settings.

View 11 Replies

Lexus GX 2004-09 :: How To Disable Navigation System Caution Message

My wife drives a 05 GX470. Is there a way to disable the caution message (i.e. Caution: Drive safely and obey traffic rules...) that appears on the navigation screen every time you start the suv?

View 5 Replies

Lexus LS 2007+ :: PCS Fault On 2008 LS460L - Data Controller?

So I have a PCS fault on my 2008 LS460L and brought it to my local Lexus Dealership....They basically insist that the data controller is/may be causing the PCS fault.

In the meantime, I guess the most probable action is to disconnect the data controller and see if the problem goes away.....

View 1 Replies

Prius (Gen 2) :: 2009 - Clearing Navigation And Mobile Phone Data

I am selling my 2009 Prius. Is there an easy way to remove all personal data (locations, telephone numbers, etc.) from the navigation, blue tooth system? A reset button??

View 1 Replies

Lexus RX 2004-09 :: Navigation System Giving Message - Insert Correct Disk

I was playing around with the navigation system of my 06 RX400H because I read about the motion override online; however I was being stupid and chose the wrong option under the "load" menu, so the navigation system kept telling me "insert correct disk. ". Hoping that I could find a simple "reset" option there, I was playing with the diagnostic mode quite a bit. One setting allow you to select the navigation unit start up logo between Toyota, Lexus, and None. There is another interesting option called "car setting" don't know what it does.

Seemed like it let you toggle between a numerous of settings, I remember one being 9001X4WD or something. I didn't know what the setting does and accidentally changed the vehicle setting for my navigation unit. After confirming the edit, I realized that the mapping for all the buttons on my panel completed changed! First of all the map button (which wasn't working at the time because I had the wrong load option) became the "Audio" button that is similar to the audio button on my other car, 06 IS350, it showed me all my audio presets and I could choose using the touch the screen (normally this feature is disabled for RX400H).

I realized I might have screwed up the setting and wanted to change back to the original vehicle setting. I couldn't find much information online, so I figure I probably hit that set button by mistake 2 or 3 times, so I reverted the car code back to what it was 3 selections ago, and bam! My panel buttons are messed up even further! Now I don't even have access to the "info" button any more! I can still get access to the first level diagnostic mode using the "display setting" (display key is mapped to the info button now) then left upper corner + left lower corner method, however I can't change the vehicle code in this mode.

I took the car to a local dealer, and the service tech was like "what the heck did you do" and he said he don't know how to fix this except to replace the whole navigation ECU which would cost thousands of bucks. I asked him it would be as simple as getting access to the onboard ECU memory and rewrite it and he said the data format is Toyota proprietary and the dealer doesn't know how to fix it.

Of course I wasn't satisfied with the answer I got, I took the car home. Following some good information on forums and navigation ECU replace instructions on AllData, I was able to remove the navigation ECU from the car, then took it apart, disconnected the power daughter board, pushed the black reset button(?), and then put everything back together. I have seem people saying this method working and not working, but for me it did work. When I restarted the vehicle, the "loading data do not turn off" screen came on, and after the system booted, GPS navigation is working as usual now. On e interesting observation, before the GPS unit has established a connection with the satellites (took about 2-3 minutes to do so), the default location for the vehicle in the system is somewhere in Washington D.C.

Now I have undone my "load version" mistake. However, without the "info" button being mapped to the dashboard, I don't even have access to the menu where you can change the "car code", so even if I know the correct code now, I wouldn't be able to enter it. also it seems that I was able to reset the ECU when I took it apart, I am suspecting that the setting for "car code" isn't store in the ECU but it is stored somewhere instead.

View 14 Replies

Lexus LS 2007+ :: How To Reset Stock Ride Height After Removing Data Controller

I have an 07 LS 460 L with R-Spec data controller installed. I want to remove the data controller and go back to stock. I removed the data controller and the rear stays super low and tucked and the front stays raised like 3 fingers above the tire. So i reinstalled the data controller for now.

View 4 Replies

Ford Audio/Video System :: 2007 F150 - Nav Not Working - Cannot Read The DVD

The navigation in my 2007 F-150 is acting up, saying it cannot read the DVD, and that it might be dirty, remove and clean, etc. etc.

Also, and perhaps an equally concerning problem is that it won't spit the DVD out. It will get so I can barely see the disc through the mouth of the system, but not enough to grab it. I'm going to try and grab the disc as delicately as I can with a small set of grooveless needle nose pliers, but haven't had a chance to try that yet.

It was doing this a while ago, but seemed to fix itself and hasn't acted up for I'd say 2 months now.

For those that have had this happen before, is it as simple as cleaning the disc, or is this a sign of a larger (possible system failure) problem?? Also I should mention that I still have the original map DVD in the truck, and I think I've taken it out once in the year and a half I've had the truck, and that was just in learning how it came out.

View 1 Replies

Lexus LS 2007+ :: Can't Read Characters As LCD Has Dead Pixels?

I noticed today that the LCD has some dead pixels, thus making it difficult to read the characters. Having issue with these data system air controllers?

View 4 Replies

Lexus ES 2007-12 :: Audio System Won't Read Some Flash Drive MP3 Files?

I downloaded several mp3 files from Amazon and loaded them on a flash drive to use in my 2011 ES350 audio system. The flash drive is plugged into the USB port in the center console, and CD/Aux is selected to play the files. The weird thing is that although most files play, there is a few don't. There are folders for the non-playing music files, and a file is indicated in each, but after a short display of the folder/file number, the player skips on to the next folder without playing anything. Is there something I can do to get the "silent" files to play?

View 1 Replies

Camry 2012+ :: Text Message Read Out Over Car Speaker System?

My wife have a 14 Corolla LE Plus, no NAV and every time I get a text message it pop up on the screen and I can play the read out message over the car speaker system.

On my Camry it does not do this. I have NAV with the 7" screen. I try matching the setting of my Camry to the Corolla and it seen to be the same but still it does not ready out the message or even pop up when I get a text message.

My IPhone 5 is paired with the car that I know that for sure, all my phone book contacts and phone work just fine even play music from my phone. I can't find anything in the manual.

View 1 Replies

Lexus ES 2007-12 :: ES350 - Check VSC Light Flashing And Car Unable To Accelerate

I bought a used 2007 ES 350 on July 2012. This morning going to work, about 2 miles from my house my CHECK VSC light and TRACTION light turned ON, just get on freeway and the CHECK VSC light started FLASHING and when this occurred, the car was unable to accelerate, the car could only go about 40 mph and then slowly going up to about 60mph. I was scared and took the next exit turn around and going home. I'm at 41000 miles and out of warranty.

View 9 Replies