Lexus LS 2007+ :: 2008 LS460 Navigation Displaying Unable To Read Data Message
My Navigation started to display a message "Unable to Read Data" and would not display the Map on my Certified 2008 LS460. All other displays worked just fine and there were no other problems with my Navi. This had been an intermittent problem for a while so I decided to bring it to Pohanka Lexus in Chantilly, Virginia. I paid them $130 to diagnose the problem for them to tell me that I need a new Navigation ECU - which at first they quote $15,000.00 I FLIPPED! I let them know that I would deal with not having a map and navigation and got my car back!
When they gave me my car I started it up to see the wrong time displaying on the clock and a message that reads "A program cannot be read. Please consult to a dealer" displaying on my screen. I immediately got my SA out there to look at the message. He tried to tinker with all the buttons and couldn't get the message to disappear so he brought his supervisor to look at the message.
They explained to me that when diagnosing the problem they tried to reset the system by removing by battery and it didn't work (Yeah, Actually it made things worse!!!) and now it is evident that my ECU has apparently completely died (and I find it such a coincidence that it happen to die while in their hands diagnosing the issue). They took the car back to see if they could do anything to get it back to the state it was in when I brought for diagnosis.
Lexus LS 2007+ :: Navigation Not Working - Unable To Read Data Message Keeps On Popping Up
I just purchase this 07 LS460 96K miles less then 2 weeks ago, everything was working fine for the first few days then the navi screen keeps on popping up this message "Unable to read data, please consult dealer" I did many research on this forum and it seems like it's a bad HDD and I have also read it cost 15k to have it replace and such. I just bought the car and its out of factory warranty with the year and miles....
I see this unit on eBay from this totaled 2010 LS : [URL] ......
Lexus ES 2007-12 :: Navigation System Stuck On 2011 ES350
My navigation system sucks!!
View 14 RepliesLexus SC430 :: 2002 - Navigation System Shut Off / Cannot Read Disk
My navigation system just shut off and the screen reads" can not read disk" . Any solution for this problem?
View 3 RepliesLexus SC430 :: Navigation System - Unable To Read Data / Check If Map DVD Is Correct
Navigation system has been working fine and then today if get a screen that says:
"Unable to read data - Check if map DVD is correct"...
Lexus ES 2007-12 :: ES350 Parking Assist Sensitivity - No Navigation
My wife has a 2012 ES-350 with the Parking Assist feature but NO NAVIGATION. You have to get within about 2-3 feet of an object before the warning (visual and audible) detects an object in front or the year of the car. Can the "Sensitivity" be adjusted up so it will recognize a danger long before 2-3 feet ? My LS-460 has a Sensitivity Setting in The GPS settings but since her car does not have GPS, I don't know how to adjust the sensitivity to give her more warning of getting too close to another car or object. How to do this ?
View 11 RepliesLexus ES 2007-12 :: How To Erase XM Sat Presets On 2011 ES350 With Navigation
How do you erase the XM Sat Presets on a 2011 ES350 with Navigation Just purchased the car and started the Free 90 Day XM Sat Trial When you hit the Down & Up Station on the steering wheel, you notice that Sat I & Sat II & Sat III already have 6 presets Have no idea how to erase these current Sat I & Sat II & Sat III and / or how to enter 6 new presets.
View 5 RepliesLexus GX 2004-09 :: How To Disable Navigation System Caution Message
My wife drives a 05 GX470. Is there a way to disable the caution message (i.e. Caution: Drive safely and obey traffic rules...) that appears on the navigation screen every time you start the suv?
View 5 RepliesLexus LS 2007+ :: 2008 LS460L Periodically Displaying VSC System Error Message In Dash
My 2008 LS460L has been periodically displaying the following message in the dash display: "VSC System Error" ...
This message displays on and off about every other day. Yesterday, I hooked an OBD2 scanner up and discovered the following error code history:
P0171 : System Too Lean Bank 1
P0174 : System Too Lean Bank 2
P0022 : "A" Camshaft Position - Timing Over-Retarded Bank 2
P0335 : Crankshaft Position Sensor "A" Circuit
P2195 : 02 Sensor Biased/Stuck Lean Bank 1 Sensor 1
Every now and then the engine will run a little rough, but usually at low RPM, and (again) not very often. The car has 166,000 miles of mostly highway driving.
Lexus RX 2004-09 :: Navigation System Giving Message - Insert Correct Disk
I was playing around with the navigation system of my 06 RX400H because I read about the motion override online; however I was being stupid and chose the wrong option under the "load" menu, so the navigation system kept telling me "insert correct disk. ". Hoping that I could find a simple "reset" option there, I was playing with the diagnostic mode quite a bit. One setting allow you to select the navigation unit start up logo between Toyota, Lexus, and None. There is another interesting option called "car setting" don't know what it does.
Seemed like it let you toggle between a numerous of settings, I remember one being 9001X4WD or something. I didn't know what the setting does and accidentally changed the vehicle setting for my navigation unit. After confirming the edit, I realized that the mapping for all the buttons on my panel completed changed! First of all the map button (which wasn't working at the time because I had the wrong load option) became the "Audio" button that is similar to the audio button on my other car, 06 IS350, it showed me all my audio presets and I could choose using the touch the screen (normally this feature is disabled for RX400H).
I realized I might have screwed up the setting and wanted to change back to the original vehicle setting. I couldn't find much information online, so I figure I probably hit that set button by mistake 2 or 3 times, so I reverted the car code back to what it was 3 selections ago, and bam! My panel buttons are messed up even further! Now I don't even have access to the "info" button any more! I can still get access to the first level diagnostic mode using the "display setting" (display key is mapped to the info button now) then left upper corner + left lower corner method, however I can't change the vehicle code in this mode.
I took the car to a local dealer, and the service tech was like "what the heck did you do" and he said he don't know how to fix this except to replace the whole navigation ECU which would cost thousands of bucks. I asked him it would be as simple as getting access to the onboard ECU memory and rewrite it and he said the data format is Toyota proprietary and the dealer doesn't know how to fix it.
Of course I wasn't satisfied with the answer I got, I took the car home. Following some good information on forums and navigation ECU replace instructions on AllData, I was able to remove the navigation ECU from the car, then took it apart, disconnected the power daughter board, pushed the black reset button(?), and then put everything back together. I have seem people saying this method working and not working, but for me it did work. When I restarted the vehicle, the "loading data do not turn off" screen came on, and after the system booted, GPS navigation is working as usual now. On e interesting observation, before the GPS unit has established a connection with the satellites (took about 2-3 minutes to do so), the default location for the vehicle in the system is somewhere in Washington D.C.
Now I have undone my "load version" mistake. However, without the "info" button being mapped to the dashboard, I don't even have access to the menu where you can change the "car code", so even if I know the correct code now, I wouldn't be able to enter it. also it seems that I was able to reset the ECU when I took it apart, I am suspecting that the setting for "car code" isn't store in the ECU but it is stored somewhere instead.
Lexus ES 2007-12 :: Audio System Won't Read Some Flash Drive MP3 Files?
I downloaded several mp3 files from Amazon and loaded them on a flash drive to use in my 2011 ES350 audio system. The flash drive is plugged into the USB port in the center console, and CD/Aux is selected to play the files. The weird thing is that although most files play, there is a few don't. There are folders for the non-playing music files, and a file is indicated in each, but after a short display of the folder/file number, the player skips on to the next folder without playing anything. Is there something I can do to get the "silent" files to play?
View 1 RepliesCamry 2012+ :: Text Message Read Out Over Car Speaker System?
My wife have a 14 Corolla LE Plus, no NAV and every time I get a text message it pop up on the screen and I can play the read out message over the car speaker system.
On my Camry it does not do this. I have NAV with the 7" screen. I try matching the setting of my Camry to the Corolla and it seen to be the same but still it does not ready out the message or even pop up when I get a text message.
My IPhone 5 is paired with the car that I know that for sure, all my phone book contacts and phone work just fine even play music from my phone. I can't find anything in the manual.
Lexus LS 2007+ :: Brake System Is Malfunctioning And Check ABS System Message
I have Lexus 460 LS L 2007. Few months back changed the battery and every thing was ok. 2 months after I had problem in the sound system ( radio and dvd ) which was on and off. One month back suddenly I had all the warning lights in the dashboard on with massage saying that that the brake system is malfunctioning and check the ABS system.
I took the car to LEXUS dealer and they reprogrammed the computer abd then every thing went back to normal and the problem fixed. Two days after I had these warning lights again with the same massege. I do not know what to do ??
Phaeton :: 2004 - Digital Sound System Failed / Navigation System Unavailable Error Message
I have a 2004 VW Phaeton.
Today, the sound system failed, then shortly after, the navigation system failed.
On the console, if I press any map/navigation buttons, the error message "Navigation System Unavailable" is displayed.
If I press an audio related button, the error message "DSP system is unavailable". I took it to a private vw repair shop and a vw dealer. What was causing the issue.
I am now headed to a vw dealer with certified phaeton tech. I looked towards fuse issue, but they appear to be ok..
Lexus ES 2007-12 :: 2008 ES350 - Where Is AFS Off Switch
In the 2008 ES350 owner manual, there is a picture of an AFS OFF switch (to turn off the Adaptive Front Lighting system) which is located at the knee dash area above your right knee (on the right side of the steering column). However, the switch is not there when I look for it in my car which has the AFS w/ HID lamp option.
View 14 RepliesLexus LX 2008+ :: Turning Up Volume On Navigation System?
How you turn up the volume on the navigation system? Unlike my wife the ladies voice telling me where to turn is hard to hear.
View 3 RepliesLexus ES 2007-12 :: 2008 ES350 - AC Sometimes Not Always Blow Normal Air
My friend has 2008 ES350. His car has problem in Air Conditioning System. Only sometimes not always it pushes normal air, not cooled enough as it should be. He took it to an AC service shop they checked the AC gas it is normal no leaking. They told him there is a faulty sensor connected to the compressor.
View 8 RepliesCamry :: 2007 Navigation Screen Error / MAP DVD - Unable To Read Data
My new '07 Camry with 5K miles on it, driving along, minding my own business. The navigation was on as it always is, but not in guidance mode. All of a sudden I notice the screen turn dark and I see this error: "MAP DVD - Unable to read data. Check if map DVD is correct." (see image)
I have never removed the DVD from the drive. It is clean as a whistle. I wasn't on a bumpy road. I tried resetting and cleaning it, but no good.
Lexus ES 2007-12 :: LH Headlight Aiming High On 2008 ES350
I have an unusual issue with the drivers side headlight. I recently got a used 2008 ES350 and the drivers side headlight aims high and dazzles oncoming traffic. I have adjusted the two screw adjusters their full range but cannot get the light to aim horizontally. The lights are HID AFS. The car was in a previous accident and the front drivers side wing was repaired.
I have a feeling the body shop did not do a great job (the paintwork is not great) and the light may not be mounted at the correct angle. The AFS works fine for the LH headlight but I don't see much movement of the RH light? Perhaps they installed a non AFS unit during the repair. How to check the alignment of the headlight assembly and body work, and how to correct the headlight problem if the screw adjusters don't move the beam.