Lexus LX 2008+ :: 2010 LX570 - Vibration / Shaking At All Speeds
I'm four weeks into my 2010 LX570. From first day, I've had vibration/shaking at all speeds--the shaking/vibration is not in the steering wheel like a few others have described. The vibration/shaking is similar to what one experiences going over a railroad track in a small/lightweight vehicle, except it happens on all types of roads and at all speeds.
Two trips to two different tire installers and one trip to Toyota (the closest Lexus dealer is a couple hours for me) to speak with their Lexus-certified mechanic and it was chalked up to the Dunlop tires. The Dunlops had excessive road force (three were between 28 and 45). Three separate sessions with Lexus Customer Relations, and nearly two weeks with Lexus of Orlando (they were extraordinary, even though I did not purchase from them), all four tires were replaced with Michelins, road force balanced to less than 8 each, and the vehicle extensively tested. They bent over backwards and were exceptional. While the problem has been minimized, I still feel the vibration/shake.
I'm coming out of years with several Range Rovers, but every other vehicle I have does not vibrate/shake, from my Tundra on up. I just spent two weeks in an ES300 and it was rock solid, at half the weight and half the cost. Additionally, none of my Land Cruisers (previous generation to the current) were anything like this. The LX is a great vehicle, but the vibration/shake is a real issue.
Lexus GX 2004-09 :: Steering Wheel Vibration / Shaking On GX470 At Speeds Over 50mph
My GX470 steering wheel shakes/vibrates when I hit speeds over 50mph. What is causing it?
View 12 RepliesFord F-150 (2009-2014) :: Truck Shaking When Pulling
I have pulled a pop up with my truck before with no problem. I bought a boat on Friday and pulled it too and from the lake ( 2.5 hours each way). The boat is 21 feet and weighs 3000 pounds empty, no gas. The trailer is a bumper pull. I was pulling no more then 4,000. Under 50 mph everything felt fine. At times when going over 50 the truck was shaking. It would happen and then stop. It does not seem to be coming from the engine.
It would happen up hill and down hill. I was thinking it was just the vibration from the boat, can a load that size make the whole truck shake?? Also the truck made a horrible clunk after backing the boat down the ramp and pulling it back up. It happened when I took the truck out of park into drive. This can be something other then the transmission???
Ford - Aviator :: 2003 - Shaking And Vibration At Most Speeds
I have an 03 Aviator with the full-time AWD with about 138,000 miles on the odometer. The truck is reliable and I love it, but I keep noticing a shake and vibration going on, I notice it at almost any speed, I'm pretty sure it gets worse at high speeds and when braking ( especially at high speeds). would this be a transmission problem, a bad cv or u joint? or would it be bad tires or wheel bearings? shocks/struts, rotors?
View 4 RepliesFord F-150 (2009-2014) :: 2010 - Shaking / Vibrating At Highway Speeds
I have a 2010 F150 XLT crew cab, and I'm the second owner. Ever since I have owned the truck, it has had a pretty bad shake/vibration at highway speeds, that gets worse with higher speed. I have checked the alignment multiple times, rotated tires, had them re-balanced, and I still cannot figure out what is causing this. What else should I be checking?
View 14 RepliesLexus ES 2007-12 :: Pulling To The Right And Steering Vibration When Accelerating Hard?
I have a 2010 Lexus Es350, and I am having this issue:
When accelerating hard, the car will aggressively drift to the right. During normal driving it is otherwise fine.
When braking from 60-70mph, I will also get a significant vibration in the steering wheel.
What can be the issue here? I've read possible brake rotor, tire out of balance, alignment?
Are these 2 issues connected?
Lexus GX 2010+ :: 2014 Tick Sound From Rear Wheel During Slow Backing Up
Weird thing yesterday, noticed a rotational tick sound coming from the right rear wheel during slow backing up with the windows down. Sounded like debris stuck between the dust shield and the rotor. Had that tinny sound. Anyway, no dealer around in the town I was at. Closest is over two hours away and not in the direction of home which was four hours away.
I was visiting friends, and decided to jack the truck up and pull the wheel off and clear whatever debris was stuck in there. Pulled the wheel and didn't see anything. Rotated the hub and could still hear the noise. I pulled the caliper next and made sure nothing was in there. There wasn't. Ok, must be in behind the disc in the parking brake shoe area and making contact with the dust shield. I pulled the caliper mount and then the rotor. Still didn't see any debris or anything foreign. What I did see was a bunch of metal filings on the inner side of the brake shoes all around the backing plate. Also a fair amount of metal filings in the drum portion of the rotor.
Rotated the hub again, and noticed the noise coming from the retaining pin cap on the rear most shoe. It was rubbing against the backside of the hub. As the hub rotated the cap spun and made noise as the spring gave way and turned. This made sense for the noise and the metal filings. The cap was still in place and the pin was not being touched yet by the back of the hub. I reassembled it all and decided the further drive home was not going cause more harm than what was already done.
Dropped off at my local dealer this morning and explained the above. The technician confirmed it as well, and ordered the a new retaining pin. Some how it got out of tolerance and caused itself to be longer than it should have. The tolerance appeared close from the front side shoe that was not rubbing.
Passat (B6) :: Loud Pop When Backing Out And Pulling Into Spots While Cutting The Wheel Hard
So I had my car at the dealer today. still is at the dealer. They say that they cant hear a loud pop when backing out and pulling into spots while cutting the wheel hard. I need to go back and show them tomorrow.
The noise occurs when stopping very hard it will pop about 3 times then if you pick up hard or step on it it also pops. then it pops when pulling in and out of parking spots and you cut the wheel hard.
Suspension popping in the front. I told them strut bearings but they said they were fine.....
Ford F-150 (2009-2014) :: Noticeable Vibration At Low RPMs Both In Park And While Driving
I just purchased my brand new 2014 F150 4x4 STX 5.0L single cab short box about a month ago. I noticed when I drove it off the lot that it had a slight vibration at low RPMs. I boiled it down to brand new stuff working out all the kinks and running around for the first time, bought a brand new jeep in 2005 and it made interesting noises and had funny vibrations for a while, but this is starting to get annoying. I have a very noticeable vibration at low RPMs both in park and while driving, more noticeable at speeds between 35-45 with RPMs anywhere from idle to 1500 or so.
I have not had it at the dealer yet, I want to be armed with a little bit of knowledge when I go in an talk to them if possible. I know how stealerships work and since it seems similar problems are somewhat common in these newer F150s, I don't want to get the "oh it's common in these trucks and perfectly normal". In my opinion a brand new truck should run smoother than melted butter on hot flapjacks, especially one that only has 1400 miles on it.
Lexus RX 2004-09 :: Shaking And Vibration Between 40 - 60 MPH
I have a 2006 rx330 which vibrates bad between 40-60. I had a my drive shaft balanced and new joints installed but still shakes. I have bridgestone dueler alenza tires with 5k on them, had them all rebalanced. Still shakes. I have 205k on her.
View 12 RepliesLexus ES 2007-12 :: Vibration / Shaking At 40 - 45 And 70 - 80 Mph
So, I started my journey in getting vibrations out of my car at the dealer (I know, I know, but it's CPO) - had rotors resurfaced, brake job, fluid flushed etc. That worked with pedal pulsing etc.
Now, fast forward 6 months - still have a notable shake at times 40-45, 70-80mph indicated. Took it back to dealer; tires are shot - I figured just a rotate, balance and align would be the cure. I bit the bullet, put on some MXVs and got the car aligned - again, at the dealer. Old tires had the edges fully worn (outside).
Today, after a 200 mile drive, the vibrations are back, and I REALLY don't want to go back to my dealer a third time to resolve this - in addition to not wanting to destroy a brand new set of tires. Who can I turn to to get this under control?
Lexus ES 2007-12 :: Shaking And Pulls To The Left On Highway Speeds At 120km/h
I just bought the car a less then a month highway speeds car shakes at 120km/h. I just complained to Toyota dealer ship and they put on brand new front rotors and did alignment at highway speeds the car still is shaking and it pulls to the left can it just be tires alone or back rotors because they didn't replace those.
View 6 RepliesLexus GX 2004-09 :: Shaking Steering Wheel And Pulsing Brake Pedal At Speeds Above 55mph
I bought 09 GX-470 4K miles ago..has 50K on it. Ran perfect when we bought it. wife said it started doing it 1 week later. I drove it and felt like warped rotors to me. replaced front rotors and pads with cheap wearever brand...I Know...I was sort of trouble shooting..did nothing ...did the back rotors and pads and seemed to fix it..did proper bed-in of new parts but, never checked at speeds above 55mph. recent trip got us up to speeds above 55... at these faster speeds when brakes are applied we get a nasty wheel wobble and a pulsing pedal...braking below 55 it feels fine.. thought's ?? last car was a 4runner which has the the same rotors and pads and never had a problem...could it be ABS ?? should I go with new oem rotors and pads ?
View 10 RepliesLexus ES 2007-12 :: Vibration While In Park And Without AC Power On
I have a 2008 es350 with 106k miles and I've been trying to fix vibration issue for a few months now. The car vibrates while in park with and without the AC power on, but its worse with the AC on. The vibration was felt in the sterring wheel and wasnt that bad just enough to be annoying. So I researched and did a few thing such as spark plugs change, mass air flow cleaning, new air filter, a few bottles of fuel injection cleaner but nothing improved the vibrations. In fact I think it got worse. So after looking online I ran across a post about vibrations and motor mounts. This is the post I found. [URL] ....
"Most likely, one of the engine mounts are 'torqued'. You can try and neutralize the mounts. Loosen the through bolts of all mounts several (4-5) turns. Then start the car, and drive back and forth several feet (using quick taps on the gas and not just idling) over and over, and let it rest at idle a few seconds before turning off the engine. Now tighten all mounts being careful not to rock the motor, and don't pry or push anything to reach the bolts! (This is where swivels co*me in handy)"
I went ahead and did it on my es and wife's 2010 rx350. It took about 30-40 minutes but I took several breaks. Here are a few pic these are from the RX but the process is almost the same ones.
Top of engine bay on the passanger side this mount is easy youll need a 14 mm wrench. I noticed the bolts here where very tight when i loosened them but when re tightened the bolts it when in very easily.
This the drivers side you'll need a 19 mm wrench. Just turn the wheel all the way to the right to get access.
This one is right behind the radiator in the front middle of the engine. Its a17 mm
This is on the passenger side behind the wheel. It just like the one on the drivers side. Its a 19mm
This one I believe is only on the rx but I didn't look on the es. I could not get to the through bolt so i just loosen the two 17mm bolts.
Once all of the bolts were lose I turned on the car and moved/drove it 2-4 feet in drive several time in the drive way. Then I stepped on the brake pedal hard while in drive and gave some gas nothing crazy maybe up to 3k rpm and for second or 2. I did the same in reverse. After that I put it in drive and felt for vibrations if I still felt something i would repeat until the vibrations stopped. Once they stopped I didn't put the car in park, I turn off the car while in drive and engaged the emergency brake. At this point i re-torqued all the bolts without move anything. Now both the RX and ES and very smooth while stopped while in drive. This a free fix and it worked great.
Touareg :: Shaking Back And Forth - While Backing Up Sound Like Bat Hitting Metal Pole?
I have been having two issues.
1.) Everytime I go to back up in my car the whole car starts shaking back in forth like someone is at the front and back rocking it.
2.) After my car has been driven around for a bit and I return to campus to look for parking spaces sometimes I have to back up because there aren't any. Whenever I go to back up, it makes this loud sound like a bat hitting a metal pole and it can be felt throughout the car. It does it all the time now.
I am beginnning to get scared to take this thing offroading. Also whenever I shift from P to R it makes this loud THUNK sound. I am going to let the dealer look at it when I take it in for the 10K service.
Lexus LS 2007+ :: Rear End Vibration At Speeds Of 60 Mph+
My car is a 2008 LS460 SWB. I bought it with 69,000 miles on it, has about 75,000 miles now. Car has had a rear end vibration at speeds of 60 mph+ since I bought it. The vibration seems to lessen when I have a full tank of gas. So...I took it to my Lexus dealer. They put it on the lift and showed me how the two rear tires appeared to be slightly out of round and said that was probably the culprit.
I then bought winter tires and put them on. Still had a vibration. Was told to wait until I put all season tires on, then they'd start to pursue.
I put Pirelli P7s on yesterday. Seem like a great tire, but I'm still feeling a rear end vibration. All 4 wheels were road force balanced. I will be taking my car back to my Lexus dealer to see if they can diagnose. What are causes of rear end vibration. Wheels are not bent, BTW.
Lexus LS 2007+ :: Vibration Only At Freeway Speeds
I have a weird vibration only at freeway speeds. It's a vibration that lasts 3 seconds but are consistently 2-3 seconds apart. It's a very suttle vibration and can be felt at my feet and slightly on the wheel. My passengers can feel it if I mention it. The key thing about the vibration it's starts and goes away the starts and goes away?
View 14 RepliesLexus GX 2004-09 :: Steering Wheel Shaking / Vibration On Comfort Mode At About 55 To 60mph
I'm getting some vibration and steering wheel shake with my '04 GX... I have a 2004 GX with the differential dynamic damper installed. About 55-60mph it starts, and shakes the steering wheel back and forth. Sometimes it's completely smooth, but on other road surfaces it shakes. On full "comfort mode," the shake is much worse, but on Sport mode it dampens the shake to about 10% intensity, but it's sometimes still there. This is not bump steer, by the way.
So far, I've done:
-Brakes
-Alignment
-Front hubs
-2x wheel balancing with 2 different sets of wheels/tires
-lubed the drive shaft and prop shaft to fix the clunk (Clunk TSB has not been done)
-changed the power steering fluid
-checked all control arm bushings, ball joints, tie rod ends, and sway bar bushings. All are solid.
I recently jacked up the front end and moved the wheels back and forth by hand. It seems like there is some looseness coming front the inner tie rods. However, I pushed and pulled and can't get a clunk or anything. I think it's coming from inside the steering gearbox. My VIN says it's before ST002-05, so that TSB aka "Steering Flutter" would apply, if it is that.
After 104k, are the front shocks due for a change? It does seem to nose-dive a bit on braking, but the shocks aren't leaking or anything. Would worn shocks cause steering wheel flutter on these trucks?
Lexus GS 2013+ :: Wheel Vibration At Highway Speeds And While Braking
I recently purchased the rims from another member here on Club Lexus.
Ever since installation, I have been experiencing a vibration at highway speeds and while braking. The wheels are correctly balanced.
My technician has told me that I need to buy a hub ring/spacer (not too sure what that is) but nonetheless, a grommet of such that fits between the backside of the rim and the frontside of the hub. I'm not too sure where to begin from there or what to even look for.