Lexus IS 2014+ :: Front Brake Pads Touching The Rotors / E-Brake Engaged And In Park
I noticed the front brake pads were touching the rotors when I was painting the brake calipers. I had my e-brake engaged and in park. I'm assuming the e-brake only brakes the rear wheels because the front rotors were still movable. Although the car still rides fine but I'm not sure if this is normal.
View 1 RepliesLexus IS 2014+ :: How To Remove Brake Caliper
I've searched, but nothing came up. I want to remove the brake calipers (unbolt from the rotors) for cleaning and painting. I need confirmation that the fronts are just two 17mm bolts on the back of the caliper that is holding it? I tried earlier but it was right after a drive so car was hot and the bolts seemed like they were secured on tightly. I will try again this weekend. Btw. I have a 350 f sport
View 9 RepliesLexus IS 2014+ :: Brake Pads - Brakes Have Been Squeaking
So my brakes have been squeaking for the past week. Brought it in to the dealership. They said i need new front brake pads. I only have 22k miles on my 3is and that seems like a really look mileage for the breaks to be worn off. I dont track ny car and i pretty much drive slow. How long are your brake pads lasting? Is this normal for the 3is pads to wear off this fast?
View 14 RepliesFord Super Duty (1999-2016) :: Getting Front Brake Pads Into Caliper - Springs Kept Popping Out
03 f350 4x4. New front calipers and pads.
Wondering if there's a 'trick' to getting the front brake pads into the caliper . Those damn springs kept popping out. I'd get three of the four ends into place in the pad holes then one would pop out while I'm trying to get the fourth in.
After about a hour of trying every different way that I could think of, another set of hands came by and with four hands holding things in place, it finally did the trick.
Prius (2001-03) :: Changing Brake Pads - Should Change Fluid As Well?
I am going to have to change my brake pads (I am probably going to do the rear shoes as well). I was wondering if I should get my Toyota dealer to change the fluid as well. I have 116,000 miles on her. Lots of highway driving, and this is only the first replacement set, these pads last forever. The fluid has never been changed before.
View 6 RepliesGolf VI R :: Changing Front Brake Replace Rotor And Pads?
Just got out of the dealer they said they recommend front brake change. They quoted me for ~730 just for Rotors/Pads/labor on the front (I am going to shop around).
I tried search Golf R Brakes info prior to posting but alot of the searches are for people buying Golf R brakes for Gti's.
1) Do I need to Replace Both Rotors and Pad at the Same time?
2) Currently Car is still stock and see's no tracks, the most car would see in the next 2 yrs would probably be stg 2+ if that. Would OEM Rotors + OEM pads be sufficient? or should i upgrade pads? Below is listing i found with some different pads options.
[URL]
3) Car is currently a 47.5k miles with oem brakes, should i just replace rears as well? even though dealer did not recommend?
4) SS Brake Lines, should i get them?
Camry :: 2007 SE - Knocking Sound After Changing Front Brake Pads
Scion TC for Camry SE 2007.
I changed the front brake pads and resurfaced the rotors. After putting everything back together, I took the car to test drive it. The stopping power is fine and there is no squeaking or robbing sounds. However, when I apply the brakes at lower speeds moving forward there is knocking sounds the comes with the tire rotations. What is the reason for this sound?
This is my second time changing the pads and rotors, with the first with no issues. I put grease between the shams and the pads, and I sprayed the rotors with brake cleaner before the installation.
Prius (Gen 3) :: 2010 - VSC / TRAC Warning Comes On After Changing Front Brake Pads
I changed the front brake pads, took all the precautions during the change, did not disconnect the 12 v battery, pumped the brake pedal 12 times, started the car and no warnings. Now the brake pedal is a little spongy, if I press the pedal to the floor the VSC/TRAC light comes on, to reset it I have to press on the pedal again and the brakes do work.
View 11 RepliesPrius (2004-09) :: Brake System Failure After Changing Front Pads
2004 prius. I change the brakes on various cars all the time, and never had this problem. After I changed both sides, I started the car, and saw 4 lights:
- Red brake light
- The yellow exclamation light
- ABS light
- VSC light
The car now stops funny, and reading the service manual, it says that if there's a failure detected, that it will revert back to very basic braking (no abs, only fronts, etc..)... As I was exiting off the fwy, I realized this when one of my front wheels locked up, even and I was not stopping very well. Scared the crap out of me.
In any case, I can't see what I may have done which would cause a failure. The only thing I could think of is to bleed the brakes again, but I did this and think it's ok. Is there anything else I can check or is this something I have to get serviced? I saw another thread where they suspected the actuator, but it is somewhat a coincidence that it would go bad after I replace the pads? I'm not sure how the regenerative brakes works on a prius, and whether there's anything I could visually inspect to see if I bumped something???
Prius (Gen 2) :: 2007 All Lights Continue To Stay On While Driving After Changing Brake Pads
So, I changed the front brake pads on my 2007 Prius blindly, and in doing so I bled the lines (I also had the key in my pocket!). Now, the ABS light, VSC light and (!) light all are on and continue to stay on while driving. Is this something as simple as resetting the codes? Is the vehicle safe to drive to a repair shop to set strait?
View 2 RepliesLexus LS 2007+ :: Brakes Shudder After Changing Pads And Machining Rotors
2008 LS600hl with 31K miles, been having low speed brakes shudder for quite sometime even after changing pads and machining rotors. This weekend thought about putting grease on the pins holding the pads, this did the trick, shudder is gone!
View 9 RepliesFord F-150 (2009-2014) :: New Brake Pads Not Lining Up Right
I put on new Power Stop drilled and slotted rotors with Hawk ceramic pads. I did the brake in runs and could feel the stopping power improving. When I got back to the house I looked at the rotors and I noticed that on the driver's side the pads are not parallel to the rotor. They are hitting on the outer edge of the outboard side and the inner edge (closest to the hub) on the inboard side. Took it all back apart and I can't see and reason for this. Double checked all the mating surfaces and didn't see any problems. I torqued the caliper brackets to 150 ftlbs and the lug nuts also to 150 ftlbs. Is it a problem the caliper sliders?
View 9 RepliesCamry :: 2014 SE - Rear Passenger Side Brake Caliper Frozen Open
So, my right, rear, brake caliper froze in the open position a little while back; I hit the brake hard, it held, heard a clack, then it let go and stayed in the open (uncompressed) position. I lost some braking power but at least have been able to drive. No visible brake fluid leak, other three brakes working fine.
At 125K, I've decided to do a full brake job, and am about to search for some of the parts on the awesome stickied parts reference list up above. I'll hopefully find some parts are available at NAPA, where I'm also ordering the right side cv axle.
So, I'm only finding remanufactured brake calipers at NAPA. Are they decent or should I look for something new elsewhere?
Ford F-150 (2009-2014) :: MPG Dragging - Caliper Locking Up - Replace Whole Brake System?
I was uber excited to buy my first brand new truck in 09..... Amount numerous issues, defective rear window (fought with ford for 3 years never replaced under warranty), sync issues draining my battery, multiple O2 sensors replaced, multiple lights replaced and a blown drive shaft all under warranty. Now my warranty literally just ended, years not miles, just rolled 36k yesterday, ran out 3 years in November 12, now I'm having break issues.
A few weeks ago while driving, I released the gas and truck seem to slow faster than normal. Seemed kind of unusual but also began to noticed a drag on my mpg, about 2-4 mpg difference, depending on highway or in town. Now 3 weeks later, I feel grinding under breaking. Now it's beginning to make sense. I figure probably a stuck caliper. While driving with head out the window , freezing in IL, by the way, seems to be the drivers front. Checked rotors, outsides only as there are the guards preventing me from checking the back side. No visual or touch grooves ground into the rotors from the pads being worn out. Best bet is its the back side of the caliper that is locked.
Question 1, does this make sense, only one side of the caliper locking up? I had a caliper lock on my old GTP but the whole thing locked up.
Question 2, do I just suck it up and replace the breaks my self, gf's dad is a manager at O'rylies so I can get anything I want at cost, or do I go back to the dealer and bitch about mechanical problems being constant with my new now only weeks out of warranty truck? I read some horror stories about clogged lines and numerous other issues causing calipers to lock. I don't feel like replacing my whole break system, lines, calipers and all just to make sure the problem is fixed. At 3 years this seems ludicrous.
Elantra XD (2001-06) :: Caliper Pistons Would Not Retract To Fit Over The Pads
I changed the rear brake pads on my 2002 Elantra and the caliper pistons would not retract to fit over the pads. After 11 years of weather exposure the pistons were frozen. I removed the calipers, soaked the pistons with WD-40 and penetrating oil and heated the housing with a hair dryer. Doing this periodically for a day I got the pistons to break free. I removed the pistons for inspection and they were severely corroded. I ordered two rebuilding kits on line which included all seals and pistons.
The pistons are threaded and screw into a threaded rod inside the housing. Should I thread the pistons in until they bottom out, or should I turn them out until they touch the inner brake pad?
Sonata I45 (YF - 2011+) :: Lubricating Metal Slides On Caliper Pads
I read here somewhere you should NOT use caliper pin grease or any other grease for that matter on the pad sliders; either on the bad or the cup itself. I think it was Smoke. I have been doing this for quite a while and need to know why it should not be done?
View 3 RepliesAccent LC (2000-05) :: How To Remove Caliper To Replace Pads And Rotors
I need to replace the rotors and calipers on my 04 accent gl. I noticed there are 5 bolts on the back of the caliper. I know one is for the flex hose connection. Then there are 2 big hex bolts closest to the dust plate. Are those for the caliper mounting bracket? and if so will they need to be removed? Then the final two are on the outer edge, however the top one is rounded and rusted, is this normal? The one on the bottom is a hex. So what needs to be removed to change the rotors and pads? I also notice that there are two screw holes in the rotor, that I guess snug it in place against the hub, however the screws are missing. Is this bad? are they needed? and if so can I get new ones?
View 10 RepliesFord 6.7L Power Stroke Diesel :: 2014 - Brakes Squeaking - Replaced Brake Pads And Calipers?
We had approximately 7000 miles on our 2014 250 when we first heard our squeaking when we applied the brakes. This happened after we had been driving a while. Took it to the dealer to see what was causing the noise. They found out it was the front brakes. They removed both front wheels to find the inner pads wearing at an angle and the caliper piston boots partly melted in middle. They ended up replacing the brake pads and calipers with new and machined rotors.
View 14 RepliesLexus GX 2004-09 :: Front Brake Caliper Bolts Frozen
Started to change front pads and rotors on my GX470, but couldn't get the caliper bolts loose. Is it safe to use a torch to heat up the area around the bolts so I can loosen the bolts? Any other way to break these bolts free?
View 12 Replies