Lexus GS 2006-11 :: GS430 - ABS And Brake Warning Lamp Coming On After Brake Pad Replacement
2006 GS430 110K miles. Did Front brake pad change by myself. Now ABS , brake warning lamps come on.
Bring it to Lexus dealer. They found 3 code on it. C1203, C1336, C1345
After performed the Zero Point Calibration, the DTC C1345 remains.
I felt so bad. They want to charged me another $185 in order to find out the problem after I have paid $130. But i am out of pocket. So drive car back to home. I don't think i did anything wrong while changing brake pad. Just remove the caliper and push the piston back.
Detail of the Code:
C1203 engine control system communication fault
C1336 zero point calibration Yaw rate sensor undone
C1345 Linear valve offset not learned.
Lexus GS 2006-11 :: GS430 Winter Driving / Low Speed Brake Squeal
How to fix the low speed brake squeal on my GS. I have an o6 with about 80K on it. Have had it for four years and never winter driven. I am debating trading it off on an AWD GS or putting it into full time service as my year round driver.
I haven't driven a rear wheel drive car in the winter for 20 years. Everything else I have is AWD of 4x4. Here in Alberta we get some serious snow and ice. I have Nokian WR2 tires on it year round because you can get snow in the mountains even in July. I tried mine on the driveway after a good snow fall and even on Winter ESB and with good tires, it does not seem to have great traction.
Have any of you used your GS430s in regular winter driving, heavy snow and ice. How to get it to perform its best in deep snow or very slippery roads?
Accent MC (2006-11) :: Noisy Front Brake Calipers
Since I have this car i noticed that the brake calipers (especially the front) are very noisy. This problem is caused by caliper's floating guides that become loose and the entire brake caliper shakes. I asked at a kia mechanic who answered to me to change the calipers support. For my trusted mechanic is useless because, according to him, this type of support have this problem (he tell me that also others car have this problem like older nissan micra) and sooner or later would return noisy.
Some time ago with greasing the floating guides i temporary solved but drying up over time the problem come back.
Lexus LS 2007+ :: Noise From Front End / Brake Area When In Reverse Like Calipers Are Loose
Heard clunk (technicdal term) noise when you are in reverse and press the brake pedal. It is coming from the front end/brake area. I did not see a service bulletin for this.
View 10 RepliesLexus GS 2006-11 :: GS300 AWD Vibrates A Little Bit When Hold On To Brake And Gear In Drive
I have 06 gs300, it vibrates a little bit when i hold on to brake and gear in drive, I did take it to dealership and they want $1300 for this job to be done. Replacement of Motor Mount on 2006 GS300 AWD
View 13 RepliesLexus GS 2006-11 :: Gas Smell Inside The Car GS430
Guys, i have a 2006 GS430 with around 119k miles...Last night when i started the car and turned on the Fan, Strong Gas smell started to seep in through the Vents, At first i didn't really think much off the smell...Drove home (about 2 miles) and then Opened the hood while car still running.
There is this black round piece that sits on the Fuel pressure line (Or atleast that's what it seems) it's completely soaked in GAS (Petrol), i need to know what this part is called.
Is it Fuel Pressure regulator? if it's fuel pressure regulator is it easy to replace?
Here is the picture that was just taken (Upon starting the car)....
Lexus GS 2006-11 :: GS430 Oil Leak In Driveway
For starters I hardly drive my gs430 and ill put it this way. Its almost been a year and i still haven't put 5k miles on the vehicle. back to the matter at hand. I am starting to see an oil leak in my driveway from this vehicle. I am unsure exactly where its coming from. It could be from the valve cover or the cam seal (assuming that is what it is called). The leak is above the alternator that is why I think its the valve cover and or the cam seal (if that's what it is)...
View 4 RepliesLexus GS 2006-11 :: GS430 Won't Start Once New ECU Is Installed
My father has a 2006 GS430 that just started to have an issue when he slows down, it feels as if the car is braking itself. I've read that people have changed their ECU to fix this issue and that it works. I bought a new ECU(same part number) and installed it but the car tries to start but doesn't. I swapped back the old ECU and the car starts. I swap back the new ECU and it doesn't. I'm wondering if the ECU has to be recorded at the dealership.
View 4 Replies5 Series :: 1992 - Front Brake Calipers Locking Up
Fairly recently acquired 1992 525i, 101,000 miles. Love the car and driving feel, don't mind putting the effort in but do not know where to start. She needed some work including both upper and lower control arm bushings. Replaced those over the last couple of weekends. This week the front brake calipers are locking up adding significant drag to the car, overheating the front brakes, smells and feels hot. Rear brakes appear to be fine. Seller had replaced brakes within the last 5,000 miles. I thought maybe he did not 'grease' the caliper guide pins and components, so I tried that and all was well for a few miles then back to the same locking brake calipers.
Is this brake caliper, brake cylinder, master cylinder or ABS related? Do I need to bleed the system? I cannot not imagine how but could replacing any of the front suspension components have had anything to do with this? I read on one thread about an interconnection (power assist) provided by the power steering pump and that 'over filling' the PS reservoir could cause such a problem. I did add fluid to the reservoir recently but the level is between the marks on the cap dip stick.
If caliper, or cylinder related is this DYI? How about the ABS? I have been looking for some good links to address this problem and repair procedures but no luck as yet.
Lexus GS 2006-11 :: GS430 Headlight Come On And Then Usually Left Will Go Out While Driving
I have a 2006 GS 430.
Absolutely love the car, however I do have a new issue with my headlights. Pretty much every time I drive at night, the headlights will both come on and then one will go off at some point. They almost always both come on, and then usually the left will go out while driving.
It doesn't happen necessarily immediately. Sometimes 2-3 minutes later, sometimes 20 min, sometimes they work fine. I took it to a local shop and they said the whole assembly needs to be replaced on each side. (Parts alone $1200/each side) and apparently the bumper needs to come off. Seems a little ridiculous to me.
Lexus GS 2006-11 :: GS430 AFS Blinking And Rear Keeps Bouncing?
I have a 2006 GS430 with electronic suspension. The AFS keep blinking and the rear keeps bouncing? What might be the cause. Do I need need rear shocks??
View 5 RepliesLexus GS 2006-11 :: How To Get Headlights To Adjust Vertically On GS430
I can't seem to get the headlights to adjust vertically on my 2006 GS430... I was able to do the horizontal and high beam adjustments done fine. It's just that when I try to adjust the vertical it does nothing... there's that gauge with the two bubble containers that you look at. When i look through the small window at it and screw the adjustment, all it does is move that little tube with the bubble either forward or backward. The bubble doesn't move. It seems to be stuck on the end where the front of the car is. The whole thing just moves!!! when i screw it clockwise, it will move the tube to the left and when i screw it counterclockwise it will move it to the right. I can move it all the way to the left or all the way to the right but the bubble just will not move.
View 4 RepliesSanta FE SM (2001-06) :: Fast Rusting On Front Brake Calipers?
I've replaced the front brakes twice now on my 2004 2.4L Manual Santa Fe.
Each time the dealership has commented on some excessive rusting of the calipers, and this last time around one had actually seized and they had to cut it off.
When I got brand new ones put on I noticed they were nice an shiny silver. Within 3 weeks there were full rusted...and still are. I don't get it??
2004 Santa Fe .... Is it possible something is dripping from somewhere that is caused this premature rusting?
Ford F-150 - 1997-2003 :: Sticking Front Brake Calipers
I have a 99 150 4 wheel drive..5.4 ..auto...110.000 mile.....notice when driving in town in hot weather....when you are on and off the brake petal a lot....stop and go..etc.....the truck starts to hop or bounce....some....I got out ..and notice the right or passenger side front brake seems a lot hotter than the drivers side......but ...when it does that....the steering wheel doesn't pull to one side...when changing pads before ..notice no one side worse for ware than other...thinking it must be sticking brake calipers....they don't do this say on interstate driving even when on and off the petal some...
View 1 RepliesLexus GS 2006-11 :: GS430 Right Headlight Doesn't Work (not A Bulb)
About 3 weeks ago i have noticed that the right headlight doesn't work. I assumed its the bulb and bought a set from kbcarstuff. Installed them today and it still doesn't work. I tried to swap the bulbs and non of them worked in the right headlight and all of them worked fine in the left one. I assumed it is a fuse and went to check it out(number 80 and 81 fuses, 15A are all sweet). Is it the ballast or something also?
View 6 RepliesFord - Mustang :: 2001 - Brake Malfunction - Front Calipers Won't Release
I have a 2001 mustang GT. I have 2 front calipers that are sticking. I changed both calipers twice, new brake hoses, bled all the wheels and the master cylinder. Why the calipers won't release?
View 19 RepliesLexus GS 2006-11 :: VSC Error On 2007 GS430 After Changing Headlight Bulbs
I have a 2007 GS 430, 126,000 miles. Initially I had one faulty headlight that would not work but after turning the switch off/on, it would work again. Eventually both headlights started malfunctioning. After reading other forums, we elected to change the headlight bulbs. So far that has worked. However, after changing the bulbs, the VSC (Vehicle Stability Control) and check engine lights came on. After running the headlights and using the car to go to/from work with about 4 stops and restarts, the car reset itself and the warning lights turned off. Scared me at first because I had also just had suspension work done. However, the Headlamp Level Control System is part of the VSC system, which makes sense, just wasn't prepared for the warning lights.
View 1 RepliesLexus GS 2006-11 :: How To Sync Contacts From IPhone 4 To 2006 GS300 Car
I'm a long time Lexus owner but new to 3GS, I've searched around but couldn't find an answer. Is it possible to sync my phone book to the car?
View 9 RepliesLexus GS 2006-11 :: GS430 - Coolant From Radiator Blowing Back And Causing Reservoir To Be Overfilled
I have a 2006 Lexus GS430 w/ 100k miles. I've been trying to solve my coolant issue for the longest and I've been doing research like crazy!!! The issue that I'm having is that coolant from the radiator is blowing back into the reservoir causing the reservoir to be overfilled and splattering all over the engine bay. Also, when this happens the fluid in the radiator drops significantly ( I have to keep dumping the lost coolant from the reservoir back into the radiator). Under normal driving the fluid wont blow over to the reservoir that much (just a little) but, when I drive long distances or if I floor it that is when the coolant from the radiator really pushes over into the reservoir. When the car cools, I find out that the coolant from the reservoir does not draw back into the radiator. (I'm guessing due to the air in the cooling system?)
Checklist on what has been done to the car:
- NEW Water Pump (Installed by Lexus)
- NEW Timing Belt (Installed by Lexus)
- NEW Thermostat (Installed by Lexus) (I also tested the thermostat in boiling water and it opened and closed)
- NEW Radiator (Installed by Lexus also was pressure tested and passed)
- NEW Radiator Cap (Genuine Toyota 1.1 bar)
- Coolant Flush (flushed radiator and engine block with water hose)
-Bled System with my Lisle Spill Free Funnel and Heater on MAX HOT Full blast! Heater is working good!
(Did this 3 times for 30 min+ to get rid off all the air bubbles)
- Performed a Block Test to see if any combustion gasses were in the cooling system, to determine if it was a blown/failing head gasket (passed)
I dont know what else to do at this point other then do a compression test and a leak down test. There is no coolant in the oil and no coolant leaks. Car drives solid and strong! Is there a bleeder valve on the GS430 somewhere or does it have a bleeder valve? Is it something I'm doing wrong?