Hyundai - Elantra :: 2005 - Squeal When Brake Pedal Was Released
My rear brakes developed a squeal when the brake pedal was released. My dealer replaced the rear brakes & disks at about 57000 miles. I had taken a salesman from the dealer to get an appraisal & he told me that it sounded like a simple adjustment would fix it. 2005 Elantra
View 1 RepliesPrius (Gen 3) :: Loud Creaking Noise When Brake Pedal Is Pushed And Released
I traded my 2007 Prius for the 2010 III Prius on 5/30. I had 5 wonderful days with it and on the 6th day, it started.
There is a loud creaking noise when the brake pedal is pushed and released.
The dealership contacted Toyota and did everything that was suggested to correct the problem and no luck.
Civic - Honda :: Brake Making Squeaking Noise When Pedal Released
A mechanic recently replaced the pads of the front brakes. After the service, the break makes squeaking noise when I release the break pedal. According to the mechanic, it is normal, and I better ignore the noise. Is it true?
View 1 RepliesLexus GX 2010+ :: 2015 - Brake Too Loose / Noise That Sounds Like Air When Pedal Released
My father purchased the 2015 GX460 this past January and the car currently has 4,500 miles. The first complementary oil change was completed in July. I feel that the brake of his GX460 is not sensitive enough, and I have to step on the brake very hard to feel the truck stopping. Does every GX460 owner feel the same way? I told my father about this, and he said I'm just not used to it. I'm thinking about taking his truck back to Lexus to check it out.
The dashboard so far doesn't indicate any ABS problem. By the way, I'm an owner of a 2014 IS350 F-Sports, and my 350's brakes are much better in my opinion. I'm not sure whether my experience of my 350, which has larger brake calipers for its size, has influenced me to draw such conclusion about the GX460 brakes.
Also, I notice that when I step on/release the GX460 pedals, I hear some noise that sounds like air. Did some research about this on the forum, and some of you have that too. I still don't understand this issue.
Accent MC (2006-11) :: Noise When Brake Is Released
My Hyundai Accent 2006 with 98000km has a noise when the brake is released. Braking is ok and seems to work well. This noise comes from the back when the brake is released.
View 4 RepliesToyota - Corolla :: Brake Pedal Squeaks When Released
My brake pedal squeaks when I release it, for the last two weeks. Does this mean I need maintenance, repair, or some oil?
View 6 RepliesSonata I45 (LF 2015+) :: Shakes / Stutters / Hesitates When Brake Pedal Is Released
My aunt recently purchased a new 2016 sonata trim is se, I believe its the base model version, I test drove her car after she bought it home from the dealer and noticed right away that when I release the brake pedal from a dead stop, foot off the brake but not on the gas pedal yet, the engine hesitates / shakes. This happens most of the time but not all of the time. I noticed this when the car had only 100 miles on it...is this a Hyundai feature?
View 49 RepliesSanta Fe (CM - 2007-12) :: Brake Pedal Bounces Back With Sound When Released Too Fast
When I release the brake pedal too fast, the brake pedal bounces back with sound which is a little bit loud to me. I feel the sound is from the spring if there's one. It's annoying so I have to remove my foot from the brake very slowly. Is it normal?
View 20 RepliesPrius (2010-12) :: 2015 - Solid Brief Single Click When Brake Pedal Pressed / Released
We have a new 2015 Prius with 6k on it and we are noticing one solid brief single click when the brake pedal is pressed and/or released. It doesn't happen every time (just some of the time) but it is only noticeable at slow speeds.
View 19 RepliesCorolla / Matrix 2009-13 :: Throw-out Bearing - Noise Comes And Goes As Clutch Pedal Is Released
Title should say Throw-out bearing aka Release bearing.
I have a 2010 5 speed Corolla CE. Having problems with their Throw-out bearings. At around 8000 miles the sqeaking/chirping noise of the bearing was too much so I brought in it to the dealer to fix. They agreed and made the repair.
Now it is only at 10000 miles (22000km) and I can hear it starting again. Just wondering if it is a common problem?
Noise comes and goes as the clutch pedal is released. If you push it in it will go away. It also will happen in all gears but easiest to hear in neutral.
Ford - F150 :: Clunking Noise While Brake Is Released?
My ford F-150 makes a clunking noise when I release the brake at a stop light or stop sign. It sounds like it is in the transmission. It only happens when I come to a complete stop and start moving again.
View 4 RepliesRam / SRT10 :: Ticking Noise Coming From Front Driver Side Wheel When Touch The Brake Pedal
I have a 2001 ram 1500 4x4. For the past 2 weeks, when I touch the brake pedal I can hearing a ticking noise coming from the front driverside wheel. The ticking frequency is speed dependent. I had the brakes replaced, and the shop could not find the ticking noise. The truck performs get and there are no braking problems other than the ticking sound, but now for the strange part...
My abs and brake light are now coming on. However, as soon as my abs and brake light come on, usually on the freeway around 65mph, the ticking noise from braking is gone. So with no abs and brake light, brand new brakes tick at the slightest touch of the brake pedal, with the ticking freq. equal to wheel revs.
With abs and brake light on, no ticking. Plus the shop said that I only have abs in the rear.
Chevrolet - Suburban :: Odd Brake Related Noise Like Spring Tension Being Released
Vehicle is a 94 Suburban. The front brakes were done approximately 14K miles ago. Rear about 10K miles ago. Ever since the front brake job (new rotors, pads) there has been a sound, sort of like spring tension being released whenever I (quickly) release the brake pedal. I think I notice it now more than ever because I don't have working ac and the windows are usually down. The thing is, if I slowly release the pedal I hear nothing. When it does happen it is definitely coming from the front and is more predominant (I think) on the right side. So far I have yet to hear this sound coming from any other vehicle stopped beside me in traffic so something must be out of whack.
I mentioned this to the mechanic who did the brakes (only shortly thereafter) and he checked it out and said nothing was amiss. Recently I had new tires installed so I asked the (different) mechanic to check the brakes again (front and rear). Apart from cleaning out the drums and a minor adjustment on the rear they said everything was good. Now I've never had any issues with stopping and I've had a few hard braking episodes without incident but this snapping noise for want of a better description is driving me nuts. One final observation: I cannot get the 'sound' to occur when I am sitting in Park and depress and then quickly release the brake pedal.
Accent MC (2006-11) :: Air Noise When Depressing Brake Pedal
Just noticed this the other day, when depressing my GF's 2011 Accent's brake pedal it made a low hissing sound, it would go away when you took your foot off the pedal, you would never hear this with the radio on, but it was enough to make me think it could be a concern.
Drove the car and it didn't affect the brake permormance, but the longer this goes, I can't imagine this being a good thing.
Car is 3 years old, and has 80-20 city/hwy driving under it.
Hyundai - Accent :: Wheel / Gas Pedal Shake At 70 MPH With Pulsating Hum (varies With RPM)
2003 Hyundai Accent. I will try to give a good description of the issue. Wheel was shaking (or was noticeable) at about 60 mph. Lessened after that but still bad. I had my tires changed and balanced as well as an alignment. My rear right toe is still off a bit. Now, the shaking is noticeable at 68-70 mph and higher. Pedal shakes, wheel shakes. I can feel some vibration all over including the seat, gas pedal and wheel the most. Wheel not jerking, just vibrating mildly.
It is not quite as bad as before and does not happen until 68-70, 10 mph higher than before the tire change/balance. I have put my back wheels on the front and it is the exact same condition - this would remove tire and balance as the culprit (?). I also hear an audible hum.. kind of a pulsing sound at 50 mph+. This speeds up and slows down with my speed. For instance if I am going 70.. I hear it every half second, 50 mph I hear it less often. It is pretty faint, not a thump. It seems to be coming from the front but I can't pin-point it. I feel no tire play up/down/side/side.
What is the next step here? I'm going to get the rear toe fixed but this shouldn't be the cause of the pulse/wheel + pedal vibration. Vibration/sound doesn't happen when I am braking. No rubbing shield behind rotor.
Hyundai - Elantra :: 2002 - Brake Pedal Goes To The Floor Without Much Force
Working on a 2002 Hyundai Elantra GT. 4 disc, no ABS. Problem is the brake pedal goes to the floor without much force. I bled all 4 lines, but no improvement. Rigid lines from the brake master cylinder to the rear wheels were very corroded, so I ran new lines. The old ones pretty much fell apart when I took them off the car. I also replaced the brake master cylinder. I tried to bleed the brakes again, but couldn't get much (if any) fluid pressure at any of the wheels. Yes, I found a couple leaks at the junction points for the rigid lines, but I re-flanged those connections and got rid of all the leaks. Still no real pressure when trying to bleed.
So, I tried a second, then a third master cylinder with a new attached resevoir. No improvement. I bench bled the snot out of this third master cylinder because the symptoms clearly suggest air was likely trapped somewhere in the system. I used a wood dowel to fully actuate the cylinder many times after all the air had been released while I had short clear hoses running from the master cylinder outlets into a little plastic cup filled with clean brake fluid. I wanted to make sure there was no way air could be in the MC, and no air drawn back in when I released the wood dowel.
Next, I quickly capped off the MC outlets and connected a hose to each brake line individually where they normally screw into the MC. I then let clear fluid drain through each line until it was spilling out clear of each caliper bleeder with no air bubbles. So, no lines are kinked, clogged, or contain air.
I took every precaution to keep air out of the system, yet when I push the brake pedal, there is still virtually no real pressure generated by the MC. The power booster rod is shoving the master cylinder in as it should. I don't think there's any problem with the power booster.
I've used gravity bleeding, manual "push & hold the brake pedal" bleeding, vacuum bleeding, and I'm certain there is no air in the lines or calipers. Still no significant pressure coming from the MC when I push & hold the brake pedal to the floor. It takes maybe 20-25 pounds of foot pressure, but always goes completely to the floor with all the bleeders closed. If the pedal is held to the floor, fluid slowly seeps from the bleeders. I'm used to it spraying when doing this on a healthy brake system.
Accent MC (2006-11) :: Brake Pedal Making Creaking Noise When Depressed
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
Toyota - Highlanderhybrid :: 2006 - Clunking Noise While Applying Brake Pedal?
I have a 2006 Toyota Highlander Hybrid 4WD. Whenever I apply the brake pedal past a certain point, I hear some sort of clunking type of noise from the front of the car. The noise can be done when braking hard, or even if I am at a stop and just press the pedal down hard. It sounds bad but I have not noticed any issues in braking performance. Everything is stock, brake pads have 60-70% as of my last serving. What this is and if I need to be concerned?
View 4 RepliesHyundai - Santafe :: Brake Pedal Making Audible Click When Press Down On It
I have a 2002 Hyundai Santa Fe with 152,000 miles on it. Last night, when I got in my car after work, I noticed that the brake pedal is now making an audible click when I press down on it. This has never occurred before (including on my way to work yesterday), but is still doing it today.
No lights are present on the dashboard, and I have not noticed any difference in the performance of my brakes. What could cause this, and should I be concerned?