Golf V R32 :: How To Mount Front Plate In Holeless Grill In A 2 Plate State
For those people who received a holeless grill in a 2 plate state how did you mount your front plate. I am supposed to have the holeless grill installed this Wednesday. I was thinking about using zip ties and mount it underneath it's original location but I am afraid that I will be blocking the radiator. I could do it by the side grill.
View 24 RepliesGolf/GTI VI :: How To Take Off Front Grill
Just bought a new grill and I was trying to take off the original one but idk where the other bolts are apart from the 4 on top.
View 11 RepliesGolf IV R32 :: How To Keep Bleeping Grill On
I replaced the small little driver's side grill a couple of weeks ago and I thought I had it on tight. It's already gone.
Any tricks for this? Should I try zip-tying it or something? And I wonder why it's a problem now...maybe the bumper is tweaked?
Golf VI R :: Removing Lower Center Grill?
How to remove it? does it just pop out?
View 1 RepliesGolf V R32 :: How Hard Is To Remove The Front Grill
I am talking about the aluminum part....
View 4 RepliesGolf/GTI VI :: Lower Grill Removal For Fogs?
I did a search and I can't seem to find anything on how to remove the 2 side lower grills for fogs. I wanted to know if the whole bumper need to be removed?
View 7 RepliesGolf V R32 :: 2008 - Lights Closer To The Grill Do Not Turn On?
I just picked up an 08 r32 and was wondering why the lights that are closer to the grill do not turn on. When I activate my high beams the hid's just get brighter. Is something maybe the previous owner programmed
Because I have checked out everything
Golf V R32 :: Front Grill Removal Need To Drop Whole Bumper?
So I am in the process of removing my front silver grill to paint it and was wondering do I need to drop the whole bumper to get it off??
View 16 RepliesGolf IV R32 :: Replace / Remove Center Mesh Grill On Front Bumper?
I need to replace the center mesh grill on the front bumper. Is there anything I need to be careful with or watch out for. when I pull on the old grill or when I push the new one back into place? Does it come out easily or is it tricky?
View 4 RepliesGolf IV / Jetta IV :: Turn Signal Wire Repair - Necessary To Remove Grill?
Im switching out the bulbs on the front turn signal light today, I reach my fat little fingers in there and can barely pull off the wire harness that goes into the back of it. When I did this the wire coverings on all three wires just disintegrated I would guess from the heat inside the headlight. Wel there's a short from where they are touching and my signals don't work at all. my question is I can hardly even reach my fingers down in there too remove that wiring harness ( which is the shortest wire ive ever seen) is it necessary for me to remove the grill the front bumper and each headlight in order to access the wires better?
View 5 RepliesGolf V R32 :: VIN Plate Rattle - How To Fix
I don't want to have the dash removed to fix the VIN plate rattle. I feel like this car is slowly falling apart.
View 11 RepliesGolf/GTI VI :: How To Adjust Striker Plate
I am wondering how I can tinker with my strike plate, is there any easy way of doing the adjustment?
View 10 RepliesGolf IV / Jetta IV :: Installing ECS Skid Plate
How to install rivets to the subframe and rails of the car I can't figure it out to save my life and it just says to put the ecs bolt and but rivet installer but it literally does nothing the rivet literally slides in and out am I missing something.
View 16 RepliesGolf/GTI VI :: License Plate Bulbs Don't Work - Fix?
So I took my GTI in for my 10k service and to have them fix the wastegate rattle and the subframe shifting. They fixed the wastegate by installing the clip but didn't have the shims in stock for the subframe so I need to go back anyway, but I'd really like to fix my license plate lights before then.
Is there a possibility the tech could have accidentally unplugged a cable for the lights when he was rotating the tires or messing with the wastegate, etc? Maybe a blown fuse? I'm running LEDs and I already tried putting the incandescent bulbs back in but they don't work either.
Golf/GTI VII :: License Plate Frame And Tow Hook Mount?
Where i can get my hands on a Fukengruven license plate frame?
Any pics of the Platypus tow hook mount on their car?
Golf V R32 :: Annoying VIN Plate Rattle Around Dashboard Area
Noticed this shortly after taking delivery but now it's become worse. When I'm under hard throttle or on really grainy/old paved roads I can hear this rattle like there is no tomorrow. At first, I thought it was something plastic behind the speedo and I tried pressing/tapping and praying for this to go away haha.
I've come to realize it's coming from the dashboard where the VIN plate is attached.
Golf V R32 :: License Plate LEDs Went Haywire - Dim Light
I ordered an LED interior package from Deautokey and they also came with license plate LEDs. The interior looks great, the license plates looked great except for one thing, the right side was slightly yellower than the left. So I contacted Deautokey and they sent me two new ones:
These are identical to the original LEDs except in the old ones the squares are arranged in a diamond pattern but I don't think that matters.
Tonight, I was replacing the right side LED hoping that replacing one is all I had to do to match colors but in order to see better I kept the plate lights on. Well when I went to pull out the housing I forgot that they were still on and pulled it out anyways, there may have been a noise when that happened but I forgot.
I put the new one in, turned the plate lights back on and found that it was dim, I rotated it and same look. I tried the second replacement, equally dim, so I thought "okay, I'll just give up and put the old ones in." Did that and they are now these ones became dim!
What happened!? Did pulling it out while it was still on (only did it that first time BTW) mess something up? Did the new ones being in there mess something up? There is no warning light or message in my instrument cluster.
Golf/GTI VI :: Getting License Plate Lighting Short Error?
I have vagcom and led bulbs in my gti. I turned off the plate light monitoring erased the code and get errors for plate lighting short and the 2 bulb errors. When I put the stock bulbs back I still get plate lighting short error on vagcom but no bulb warnings, why that's happening even though all the lights turn on and function fine?
View 6 RepliesGolf IV / Jetta IV :: 1 License Plate Light Not Working?
So I noticed a few days ago just one of my license plate bulbs blew, so I tried throwing another in and it won't light up. If I check for 12v at the housing and I have 12 where do I go from there? 2005 golf 2.slow
View 1 Replies