Golf IV / Jetta IV :: Springy Popping While Backing Up
Diagnosing a possible front suspension issue.
While backing up, I felt a springy popping in my car. I ignored it attributing it to just the freezing temps and kept on driving. After a few miles I felt something got loose and started rattling, but it went away after a few seconds. Maybe a nut got loose and dropped from the car? Anyway, the rattling is gone but during slow turns, I still feel popping or pinging. I don't feel this when driving at highway speeds.
Can it be the strut bearing mount broke ( see pics below)? Looks like the driver side collapsed? Would that explain the sound of something getting loose, that the mount actually broke?
Driver side
Passenger side
Lexus SC430 :: Grinding Noise From Steering Column
Grinding noise (light) in the steering column on turning the ignition key on, after few hours of parking in hot sun only, the movement of steering column is to the set memory, after that no noise, cold start in the morning is always noiseless, feels like it needs lubrication?
View 7 RepliesTiguan :: Steering Making Grinding / Rubbing Noise At Low Speeds
The steering on my wife's 2010 Tiguan makes a bit of a grinding/rubbing noise at low speeds? Something isn't right, it sounds the same way my X5 did when the Rack needed to be replaced. It would be strange to have 2 cars needing new racks within the same year....especially since they are both 2010 model.
View 9 RepliesLexus GX 2004-09 :: Power Steering Grinding Noise While In Drive
Experiencing a grinding noise when applying the brakes and the transmission engaged in Drive and applying power left or right on the steering wheel? For example, I am going through drive thru and and wheel are slightly turned to the the left and a grinding/buzzing sound starts..
View 2 RepliesFord Aerostar :: 1997 - Grinding Noise From Steering Wheel?
'97 Ford Aerostar, 155k miles. Airbag model-
The problem: When I turn the wheel, there is some grabbing and tightness, and a strange grinding noise from the top of the steering column, like, right under the steering wheel. What's more, the wheel will actually pivot up and down on the steering shaft. I have tried pulling on it, and it loosen the grabbing, but it won't pull off in my hands or anything....
I suspect a bearing in the upper steering column has failed or has come loose. I guess I need to pull the bag and look around- Are there any tricks to pulling the airbag?
Camry :: 2007 - Steering Wheel Grinding Noise On Left Turn
Lately my 2007 Camry (2.4 L, Auto) has developed a bit strange problem. When I'm driving on highway, even slight left turn results in a grinding noise and sort of resistant steering wheel. It happens only when I turn left. As soon as steering wheel gets back to straight, the noise and steering wheel resistance/hardness goes away. I don't really feel much when I'm driving slow on the city streets. Although some time when I am little bit fast, I feel slight grinding noise and steering hardness. No problem in turning right at all.
View 5 RepliesFord - Focus :: 2012 - Grinding Noise When Turning Steering Wheel?
Ford Focus 2012 - 25,000 miles
There's a loud grinding noise from the front end of car when I turn the steering wheel... even when the car is off and in park.I can post videos of the noise if needed.
Ford Super Duty (1999-2016) :: Grinding Noise In Steering And Hub
I noticed the front diff of my truck was whining, so it decided to take a look. I noticed that the passenger side hub would not unlock when it was in the lock position. My truck has the manual floor shifted 4x4 and the manual hubs, not the ESOF. I removed the locking hub from the hub bearing assy and I noticed that the axle shaft still moved when i spun the wheel. I know the manual locking hub is trashed (pieces fell out when i removed it from the truck) but does the fact that the axle shaft still spins in the assy with no hub installed also mean that my hub bearing assembly is trashed and warrants replacement?
Finally, the number one most annoying thing with this "new to me" truck, is this noise in the steering column. It is very hard to describe, but when slowly turning the wheel, either left or right, it will produce a groaning/grinding sound that CAN be felt in the steering wheel. There is a roughness/vibrating/binding type feeling in the wheel when this noise is made. I lubricated the boot that goes through the firewall, and the spring around the shaft behind the turn signal switch with silicone spray and the noise goes on. It really feels like it is somewhere in the column, but as I said before I do not know anything about these superdutys. I work for chrysler and I have never experienced anything like this on a dodge truck.
Its not the best but here is a video, little grinding noise that I am speaking of is most noticeable when camera angle changes to the side of the column, just before door buzzer makes noise : Grind steering - YouTube .....
Camry :: 2003 XLE L4 - Grinding Type Noise When Turn Steering At Low To Intermediate Speeds
I have a 2003 Camry XLE L4, and there is a grinding type noise when I turn the steering wheel at low to intermediate speeds, and when I go over a bump. I can also produce the noise when the car is parked and I bounce the driver's side up and down by placing my hands on the left fender. The struts, steering rack, and CV axels are all new. Also when the car is cold, turning the steering wheel produces a squeak (a different noise) from just behind the steering wheel.
View 11 RepliesLexus GX 2004-09 :: 2008 - Grinding Noise When Steering Wheel Turned Completely Right
My 08 gx just started making this weird noise when I have I'm leaving from a stop and have the wheel towards the right. It sounds like a rubbing noise. This doesn't happen when I have the wheel turned to the left. Only the right.
View 10 RepliesFord Super Duty (1999-2016) :: 2006 - Power Steering Grinding Noise?
i have a 2006 F250 XLT 5.4L 4x4 Crew Cab. after months of dealing with an ongoing power steering issue and replacing pumps left and right, i decided to replace the entire power steering system. Ordered Gearbox, Pump and Cooler from dealership. The install went fairly easy, and finished in 2 days.
The truck used to whine and grind as i would turn wheel any direction, driving or in park and the wheel used to pull , like jerk a bit when i would go like in a u-turn.
Not anymore, all those issues are gone. Steers straight , no whining , wheel doesn't pull anymore and all seems fine, EXCEPT when i take a turn , for example onto a driveway where its a bit of an incline. Then, i hear some grinding noise and a bit of vibration in my wheel. I think it comes from gearbox or pump.
Im scared not to drive it too much as all is new components and don't want to ruin all over again.
Ford Brakes/Suspension :: Faint Grinding Noise When Turning The Steering Wheel At Low Speeds
One my F350 with 175,000 miles on it, at low speeds when turning the steering wheel it seems as if it has two places during use that it rubs or has an oblong spot in it. I have 285 tires on it and have for years.
Kind of like if you were turning a shaft in a seal and it rubbed or was rough. It makes a faint, muffled, barely audible grinding noise or feel. I have a lift and level of about 4" and 285s for years. This just started in the last 5 months or so.
Steering - Pontiac - G6 :: 2006 - Rhythmic Metallic Grinding Noise Coming From Driver Side Front End
I've been hearing a rhythmic, metallic ringy grinding noise coming from the driver side front end of the car that seems to be in time with wheel rotation. It happens between 5 and 40mph, worsens while the steering wheel is turned even the slightest to the right, goes away completely during left turns, reduces and becomes intermittent above 45mph, and between 0 and 5mph, as I turn the wheel to the right from any position, I hear squeaking. I recently had the front control arm, ball joints and struts replaced. It has 140k miles. What could it be?
View 4 RepliesChevrolet - Silverado :: 1994 - Loose Steering Wheel And Grinding Noise Feel When Driving Straight Above 20 Mph
1994 Chevrolet silverado 2WD 350/V8 ... I've been too focused on the loose steering and now there is a grinding noise feel on the steering wheel when I'm driving straight and above 20 mph. I jacked up the front end of the truck and after wiggling the front tires at 12:00 and 6:00, I can feel a slight movement at both front wheels. Is it a telltale sign the wheel bearings has failed. Note that I am deaf and can't hear any growling/grinding but I certainly can feel the grinding feel on my steering wheel. Wheel bearings it is?
View 19 RepliesFord Super Duty (1999-2016) :: Grinding Noise While Braking From Engine Bay / Power Steering?
Truck seems to run ok, but when I push the brake pedal down a bit, a strange grinding/howling noise comes from the engine bay and same thing with the power steering. When I put the brake pedal down to the floor, it stops?
View 12 RepliesGolf IV R32 :: Grinding Noise Under Acceleration
"Workshop?" Will there by cuties there? Will I have to participate in small group discussions? What exactly happens at these workshops?
I've had this happen to me at least twice now since I've had the starter replaced @ Stohlman VW in N.VA. I've had some good experience with them thus far considering I've drop quite a bit of money into their service: complete hvac rebuild, starter, replaced a couple of pistons, etc...
Before I dive head first into replacing the alternator, is there a slight chance that the 2 are related? I figure I could try & fix it myself b/4 my car turns into a money pit.
There's no real rhyme or reason when the warning light comes on, I do notice that I hear some sort of grinding noise under acceleration. If I'm in neutral & coast, the warning light cuts off. It's not throwing any codes that I know of. I've got around 77K on the car now.
Other things I've read I could do too. Check:
1) battery terminals
2) slip clutch pulley
3) belt & tensioner
Golf IV / Jetta IV :: Transmission - Grinding Noise When Try To Take Off
OK so my 02m goes into to all gears but when I try to take off it makes a grinding noise and kinda feels like it wants to start hoping. The car set for about 2 weeks and didn't have a problem with this at all. I can also shift the car into gear when started and not push the clutch in.
Car has a fx400 clutch with billet flywheelsl
Golf IV R32 :: Glove Box Drops Down With A Grinding Noise
The glove box normally opens in a slow and gradual, pneumatic kind of way. I opened it on Friday and it made a grinding noise then just dropped down. The left side hinge has ridges, like cog teeth and I'm guessing whatever gear fits those teeth has fallen out of alignment. The latch still works fine.
View 2 RepliesGolf IV / Jetta IV :: Starter Grinding Noise
So I have the well known starter grinding noise since I bought the car six months ago. Is there really any danger to the flywheel or the starter itself not fixing this? I don't mean from a purist point of view, of course it's not good. I don't really care about the noise. Does it maybe 1 out of 3 starts in the cold. Are things really getting chewed up, or it's really no big deal.
View 13 Replies