Golf V R32 :: After Installing Lights Getting Bulb Out Error Message?
I installed the lights and they work fine but everytime I turn them on they throw a bulb out error message. I have the cold diagnosis turned off for the fogs and I still have it. Whats next?
Here is my coding. F78F8F2700041500470F0000000000000018110B5C00010000 0000000000
Golf V R32 :: Installing H&R Rear Sway?
So tonight I got the chance to install my H&R Rear sway bar on my car...let me start off by saying I was lucky enough to have a lift, air tools, all the correct tools, etc...now the frustrating part...i opened the box saw the bar and new bushings, figured this should be 100% straight forward 10 min job... the old bar came out in about 3 minutes...then I got the new bushings on the H&R Bar and went to put the factory brackets on...they wouldn't fit even close. Luckily I had a press so I pressed them on. Once I got the bar in the car I got the two top bolts started and could not for the life of me get the bottom two...its like they were 1/4in to low... Was I missing parts from H&R? also the factory caps/brackets seemed to sit off to the side of the new H&R bushings and there was no way to line them up straight, but I finally got everything on there..
View 18 RepliesGolf V R32 :: Rear Fog Icon Popped Up After Installing LED
I installed my LEDs put in the fog trigger wire, did the vag com, and on my dash the rear fog icon pops up. BUT no rear fog, I still have a bulb out message as-well. I've triple checked all of my wiring today, and did not see anything wrong. I've tried replacing the bulb.
View 17 RepliesGolf IV R32 :: Can Move Front Brakes To Rear After Installing BBK?
I am going to install a BBK on the front of my car and I was wondering if I can take the larger front brakes and move them to the back of the car.
If not, any good set of drilled or slotted rotors for the rear brakes?
Golf VI R :: Installing VWR Springs - Rear Suspension Unknown Part
I am installing VWR Springs to replace worn stock components on my mk6 R. It appears that the previous owner slammed the car, and removed the "nipple" that holds the rear spring in place from the top. Both upper and lower spring isolators were present.
I am trying to find a name or part number for this unknown "nipple". I tried some combinations, such as "rear spring cap" and "rear spring centering guide". It looks like it would screw into the body, right above the springs themselves.
Golf V R32 :: Installing OSIR Rear Spoiler And Color Matched Sidemarker
I just received both items today.. The CF spoiler seems a little bit twisted...but no big deal, I can bend it a little bit to fit...
How to install that spoiler? using 3M tape only? and also I cannot push the original side marker out...I pushed so hard and it didn't pop out...
Passat (B6) :: 2006 - Airbag Fault Error After Installing New Head Unit
After installing the new head unit in my 06 Passat 2.0T, the "Airbag Fault" error appears on the MFD upon startup and the airbag light on the gauge stays on.
View 5 RepliesTouareg :: Installing Reflector On Right Rear Side Of Lower Rear Bumper?
How to remove/install a reflector on the right rear side of the 'lower' rear bumper? I don't see any screws. So, can I pop it out with a screwdriver? Or, is it attached from the inside?
View 2 RepliesTouareg :: Installing DVD In Rear Console
While I'm waiting for my new Touareg (a few weeks...), I'm asking if it's possible to install a DVD reader in the rear console (between the two front seats, useful for rear "children" passengers). I'm talking about this kind of DVD reader "all-in-one", with the 7" screen included (it folds inside when not in use). The size of the equipment is the standard A1 for Europe: 70 inch wide, 19.6 inch height and 73 inch deepth. Obviously, I'm thinking to install inserted in the rear console, below the air vents, in place of the controls for the 4 zone air conditioner that I didn't ordered.
View 5 RepliesPrius (Gen 3) :: Installing Rear Anti-Sway Bar?
I installed the 2008 Scion xB rear anti-sway bar (part number PTR11-52091) on my Prius Saturday morning. For those interested in this mod, here are install instructions with photos of the process.
The 2008 Scion xB TRD rear anti-sway bar will fit a Gen III Prius.
Ford Excursion :: Installing A Rear Door Glass?
I just had a heck of a day. I was using my weed whacker to clean up my front yard before the city got on my case- we got a bunch of rain so the desert is oddly very green. Anyway, I was working on the other side of my yard when I hear a sickening, loud pop sound. I turn off the trimmer and go to look at the Ex, thinking a rock somehow hit the door panel pretty hard. No damage. Weird, I think.
As I'm turning around, my eyes glance up to see... my driver's side rear door window in a million pieces being held together by the tint. Holy. Dang. My trimmer kicked up a rock which flew a good 25-30 feet and shattered my door glass.
So, I am planning on ordering a replacement glass online. I's it a very difficult job? I have done window glass before, but just in old trucks and cars- 1960 Falcon, 1969 F100, 1970 F500, 1976 Jaguar XJ-12. Never did a new truck.
Ford Excursion :: Installing Speaker - Remove Rear Trim?
I'm trying to upgrade my speakers. I got the ones in the front and rear doors installed. I hoping there is a way I can access the speakers without having to completely remove all of the rear panels.
View 8 RepliesTouareg :: Rear Fog Bulb Melted Into Red Lens And Exploded
About a month ago i installed the rear fog in my 06 TDI. I used all the proper stuff ( VW wire, 1156 bulb)
Well yesterday i finally got to use it while driving on the interstate during the reminisce of tropical storm Barry. well all remain good until i stopped off at the mall with my wife, got back in the truck and proceed back home when MFI prompts me to check lights and little icon lights up... well today i check it and its the rear fog. The bulb had melted into the red lens and exploded.
Lexus RX 2010-15 :: Rear Doors Will Not Unlock After Installing Vibration Control
I just finished installing sound deadners and vibration control in my rear doors and when I finished the doors would not unlock...at all. Manually nor automatically. I'm sure the linkage cable was green on top, grey on the bottom. The real problem here is that I can't even get the doors open to look for a fix. This may be a dealer appointment. On the bright side, with just the rear doors complete the sound is already vastly improved over stock.
View 3 RepliesFord Ranger / B-Series :: 2011 - Installing Sliding Rear Window?
Installing sliding rear window in a 2011 ranger sport? Is this a DIY project or should it be left to the pros?
View 2 RepliesPassat (B5) :: 1999 - How To Replace Rear Brake Light Bulb
I found out today that my left rear brake light bulb is out. How do I replace it? And where do I buy the light bulb? The manual doesn't say the model # and instructions.
I drive a VW Passat 1999 1.8 T
Passat (B5) :: 1998 - Rear Brake Light Bulb Not Working?
Looking for a diagram of how the rear bulb set should be filled on a 98 Passat Estate. ie: with what bulb types go where. etc.
I have big problems with my brake lights not working when the lights are turned on, then when I change bulbs about, they work but the rear lights do not come on etc, or one side does. All bulbs work, but not as they should together. I know I have a right mess of bulbs in the wrong place. The car is just new to me so trying to sort. I also have one empty bulb set on the outer side of each bulb holder unit and so wonder what this is for and if it is used.
Left side rear bulb unit on 98 passat estate...
Passat (B7) :: Power Window Switch Broken While Installing Speakers In Rear Doors
I recently installed replacement speakers in the two rear passenger doors in my 2014 Passat. During the installation the power window switches broke. How difficult is the replacement. I have been looking for a video or tutorial on how to potentially fix this myself. The dealership wants 165.00 a door to fix.
View 1 RepliesPrius (2010-12) :: Installing Center Brake Light Flasher In Rear Hatch
I am going to install a center brake light flasher in the rear hatch. I see the panel that appears to cover the area I need on the inside of the hatch between the 2 windows. What is the best way to remove it? Am I on the right track?
View 3 Replies