Ford F-150 (2009-2014) :: 2013 - Front Frame Bent - Replace Whole Frame?
Bought a 2013 FX4 two weeks ago to replace my 94 F150 and got to enjoy it for a whole 10 days before I got rear ended at a stop light. The car hit me doing between 30-40, fast enough to make her airbags go off, and it was hard enought to force the bed to hit the cab. Unfortunately, the damage is more than cosmetic body work. The bottom of the bed is pushed up under the bedliner and the frame is bent in front of where the leaf spring connects. My concern is that the adjuster will want to "fix" the frame and I will be stuck with a lifetime of alignment issues, suspension issues, etc. I know the rear of the frame is not as much an issue as if the front was bent, but I don't know how they could fix it without cutting it and welding in a new piece, and how can I know that the frame is true?
View 14 RepliesGolf/GTI VI :: How To Clean Chrome Exhaust Pipes
Is there any good product recommendations to clean the caked on carbon build up on the exhaust pipes? I want these pristine shiny again.
View 14 RepliesGolf IV / Jetta IV :: AC Not Working - Pipes That Go To Evaporator Stay Warm
My AC is not working. I just tried to put in some freon and it did nothing for me. Hopefully this doesn't make matters worse, I'm finding that it may have..
From what I can tell everything is working fine except the pipes at the firewall that go to the evaporator stay warm and don't cool at all after ten minutes.
The clutch is engaging when the AC button is pressed and stays on fine.
I found this thread : [URL] .....
about the blend door, that could be it haven't checked yet but does it suggest that the condenser isn't working since the pipes don't get cold?
Golf IV / Jetta IV :: Radiator Coolant Started Leaking From Pipes?
Recently I started leaking coolant on the driver side area to the right of the engine:
I am assuming I need to replace some part/tubing that has a leak in it, but I am not sure what any of these things are called. How to identify what leaking part here is?
Golf/GTI VII :: Black Soot On Chrome Exhaust Pipes - Is This Normal
Lots of black soot on my chrome exhaust pipes. I imagine this is normal, but I've never noticed it on other cars, because I have never had chrome tips.
View 5 RepliesGolf/GTI VI :: Notching Frame For The Axle?
I am about to install my coils and I just wanted to ask what is the lowest drop you can have without having to notch the frame for the axle? I have read most of you guys bang your axle on your frame and dent it or just mark it up but would 23.5" ftg be a problem for daily driving?
View 1 RepliesGolf IV R32 :: Seat Frame Broke - What To Do
Over the past few months I've been hearing a popping sound from under my seat when I move a certain way and figured it was just the cold or another new sound well today I found out it was the seat frame mount and it finally snapped, pictures to follow.
Went to the dealer they quoted part/labor is gonna be around $1000 so I took it to a friends shop to see if he can weld it or if it's too far gone, should be getting it fixed this week, for now it's zip ties and really cautious driving.
Golf/GTI VII :: License Plate Frame And Tow Hook Mount?
Where i can get my hands on a Fukengruven license plate frame?
Any pics of the Platypus tow hook mount on their car?
Golf V R32 :: Clunking Noise When Going Over Bumps And Humps In The Road - Sub Frame Bolts?
Do we suffer from this clunking noise as well? I know I have rattles and things that make noise over bumps and humps in the road. But is this what I hear?
[URL] .....
Golf/GTI VI :: Frame Notch Went Smooth / Axle Is Dangerously Close To Turbo Outlet
Frame notch went smooth, we pulled the bag and disconnected the axle from the hub and just pulled everything out of the way. When we reassembled everything, the wheel now pokes 3/4-1 inch more than it did before. We pulled the axle back out and realigned it and made sure it seated properly and messed with the strut and its bolt to make sure there was no play or anything (it was reinstalled with the same orientation), but nothing seemed to change it. Could just disconnecting those two things cause the camber to go out of whack that badly? When installing the bags I didn't run into this issue and the camber was barely even off when I got it aligned. Trying to find out what could possibly cause it to get that far off. When I installed the bags the camber and toe barely even changed.
Also, I can't even air out all the way now because the wheels were a perfect fit before, and now they poke too much... but with 17 psi in the right front bag, the axle is dangerously close to the turbo outlet. Seems to feel like barely a business card could fit between the two. The frame notch was done correctly and was the 5th one my buddy has done.
1912298_10201505446825691_1396899283_n by Chadillac910, on Flickr
Prius (Gen 2) :: Gas Pipes Have Been Falling Fast
Ever since I got my car back from service at a car shop 3 days ago, my gas pipes have been falling fast, getting half the distance I used to. The weather is the same, my commute/miles are the same, my driving habits are the same (hypermiling more or less), and the trip consumption on the MFD is normal. My average is 52.5 MPG. The only thing that's changed was getting my car maintained and they used synthetic motor oil for the first time but that should make no difference.
Dont know why I'm seeing my pips drop at a 2x rate.
Accent MC (2006-11) :: Water Condensation On AC Pipes
I noticed today, when I opened the hood, that there is water condensation on the air conditioning pipes when the A/C is on. When it's fully on there is enough sweat on the pipes, and water starts dripping.
I added two images. In the first one you can see the water condensates on the two ends of the pipe with the white cap. In the second image, while it's not so clear, there is another pipe a bit deeper that also sweats.
Is this normal or not? Never noticed it.
Lexus LS 2007+ :: White Smoke Coming From Pipes
I went to dinner tonight and on the way home I noticed white smoke, coming from pipes. It's 42 degrees outside. I didn't notice any from any cars I saw beside me. I saw it when I got home. It didn't have any smell to it at all. It just felt warm. My girl friends car was not making any smoke either. I have never seen any during the day when it was warmer out.
View 12 RepliesLexus LX 2008+ :: Mid Pipes For LX570 To Fit Directly To LongTube Headers?
I have a lx570 2013. I bought Doug Thotley's Longtube Headers. I haven't install yet, But I am about to.
I need to get my self a set of mid pipes that would hook directly my Doug Thorley's LongTube Headers and into the oem cat back.
I looked around it I found this set. Link Below: [URL]
Also, a friend of mine of mine has a LX570 with JBA long Tube Headers (Titanium), He also wants a set of mid pipes to fit directly to his Jba long tube and into his oem cat-back.
Rodeo :: 1996 Heater Core Plastic Pipes Broken?
The two hoses from the engine to the heater core plumbing at the firewall came off. The plastic piping the hoses attached to became brittle and weak from engine vibration. I tried threading 1/4" pipe threads then installing pipe nipple to which I attached heater hoses from engine-worked for a while then failed. There is very little room to work with between firewall and the engine. I'm curious to see how plastic piping goes to heater core.
View 1 RepliesFord Excursion :: Black Material On Rear A/C Condenser Pipes?
What the black spongy tar like substance on the a/c condenser pipes in the rear of my Ex are? It's is put on at the factory but no one at Ford or anywhere else I've been can tell me what it is. I'm relatively sure it keeps the pipes from sweating.
View 5 RepliesFord 6.7L Power Stroke Diesel :: 2012 - EGR Tubes / Pipes Leaking
Well at 200,008 miles it's time to change my newly leaking EGR pipes. Is there gaskets that goes with these parts? difficult to install? Part numbers? no "installation kit".
View 14 RepliesFord Super Duty (1999-2016) :: 2005 6.0 - Oil In Intercooler Pipes
About a month after replacing the oil cooler and welding the egr cooler, I randomly got a "low oil pressure" message pop up on the dash. I checked my oil level when I got home and it was full so I assumed it was just the oil sending switch went bad. A couple days go by and I noticed a substantial puddle of oil under my truck so I popped the hood and the entire top passenger side of the engine was soaked in oil.
I assumed it was the inlet turbo oil gasket because the turbo pressure wouldn't go above half, but after replacing it the leak was still going strong. It turns out that all of that oil was spraying out of my intercooler boot at the front of the turbo. I ordered a new kit and replaced all the boots and pipes and got her running.
While driving around the block the turbo sounded like it was being smothered and wouldn't engage. 30 seconds later the truck went into limp mode. From what I've read it can be solved with a ccv mod but i don't think that will solve as much oil as I'm experiencing, however I could be wrong. Could this be a blown turbo seal or maybe the head gaskets?
Ford 6.7L Power Stroke Diesel :: Dirty Exhaust Pipes / How To Clean
I haul a 5th wheel camper about every other month. The rest of the time, my truck is a commuter mobile. On one of the camper forums, the guys were talking about how clean their 6.7's run and how their exhaust pipes are clean. Well, the last time I camped, I walked around the campground looking at exhaust pipes on 6.7's. Most have clean exhaust pipes. Mine has dirty exhaust pipes! Does this mean mine is not running properly or is it the way I drive? Anything to be concerned about?
View 14 Replies