Golf IV / Jetta IV :: 2003 - After Changing Head Gasket Still Overheats?
I recently replaced the whole head and head gasket on my 2003 jetta 1.8t and it is still overheating so I have to replace either the thermostat, cooling fans, timing chain, or water pump. I have $700 and they said they can fix it for that. So should I spend my $700 and hopefully the problems go away or should I just try to sell the car as is and try to squeeze as much money out of it as i can?
View 7 RepliesVolvo - 850 :: Stalled And Then Smoke Came Out / Head Gasket Is Blown
I believe my head gasket is blown, but no one really knows what's wrong with it.. Car stalled & then smoke came out the oil tank an coolant tank an muffler? I just got this car used a month ago.. where to start..
View 3 RepliesGolf IV / Jetta IV :: Misfiring After Valve Cover Gasket Replacement
I did a valve cover gasket replacement. Changed all spark plugs and coilpacks. The car is still misfiring. I also just did the timing belt and water pump. Why it's still misfiring?? I'm new to this whole forum thing so bear with me lol. I'm wondering if it would be my cat, fuel pump, fuel filter. Or could it be a sensor?
View 2 RepliesCamry :: Blown Head Gasket - Smoke Coming Out Of Hood
Saturday I was driving to my friend's house. My A/C is broken (just happened 2 weeks ago) so my windows were down. I hear a loud boom. I hear a clicking noise when I accelerate but it stops when I take my foot off the gas.
I am 5 minutes away from his house and he's a mechanic so I just wait until I get there but as I'm turning left, I notice my car is smoking. When I get there, I couldn't even put it in reverse to park and there was smoke coming out of my hood. He and another mechanic friend said it was a blown head gasket.
I had it towed to a mechanic and he said it was a blown head gasket and quoted me $1,800. I know nothing about cars so there's no way I'm fixing it myself.
Is this worth fixing or should I just get a used car and sell it as is or for parts?
It has 230,000 miles on it and I drive 80 miles per day for work. No other problems except the A/C as far as I know.
Pontiac - Montana :: 2002 - Head Gasket Replacement
I have a 2002 pontiac montana that needs the head gasket replace. Mileage is 152,000 miles with a v6 engine. I would like to get at least another 75,000 miles once the repair is done. Is it worth doing as alternative is to scrap the van and buy a new vehicle...
View 3 RepliesSubaru - Forester :: 2007 - Head Gasket Replacement
I have a 2007 Subaru Forester X Sport Model. I just passed 86,000 miles - much of that open road driving. My head gaskets need to be replaced. This seems somewhat early. I recently switched from using regular motor oil to a synthetic blend that the dealership suggested. Is there any history suggesting that switching lubricants might cause the head gaskets to deteriorate?
View 10 RepliesHonda - Accord :: Puffing Out White Smoke - Blown Head Gasket?
So just a few days ago my car started puffing out white smoke, not all the time, but every so often. I noticed last month, that when i am sitting still, my temperature gauge is slowly moving up, but when i would start moving, the gauge would go back down. I know my cooling fan is working, because when i would turn the car off, i can hear it going. My car has been drinking oil and coolant like crazy, it has hard starts sometimes, it never runs boiling hot, but it has gotten right above the middle line. Is this a "bad" head or a "blown" head? Its still driveable, i only need this car to last me through may and i am getting another one in june, so if the engine goes by then, i dont really care, the car has 253k miles on it, its ready to retire anytime now. How to make it last one more month? Does this sound like an engine head problem?
View 4 RepliesGeo - Prizm :: 1995 - Starter Just Clicking After Head Gasket Replacement
I recently replaced the head gasket on a 95 Geo Prizm. Now when I tried to start it, all I get is the starter clicking. I tried tapping the starter solenoid, to no effect. The only electrical that I messed with during the head gasket replacement was to disconnect the battery.
View 4 RepliesCivic - Honda :: 1997 - Cylinder Head And Gasket Replacement
I have a 1997 Honda Civic that I was given by an elderly neighbor's daughter after the elderly lady went to the grocery and ended up 100 miles away when she could not figure out how to get home. The car was smogged at the beginning of the year but when I got it ran very rough and the temp went nearly to overheating on the drive home when I was stuck in stop and go traffic.I found the radiator fluid level low and an oily residue inside the radiator water bottle. I took it to a mechanic to check it out and was told it had a blown head gasket and maybe worse.
I am thinking of buying a rebuilt cylinder head and replacing it myself but I am not sure how to diagnose if any other damage could have been caused to the engine. It's hard to know but I am guessing that the engine was damaged during the 100 mile road trip due to low coolant level. It turns out short term memory loss was the diagnosis for my elderly neighbor. I filled the coolant level and ran the engine for a bit and the temp stayed normal but the rough running remains. The oil dip stick shows no signs of coolant in the oil and the coolant looks bright green when I looked in the radiator after topping it up with some water.
Any way to detect if I could be facing bigger issues like failed bearings? I am OK to do the head replacement but an engine replacement starts to get into the realm of what it would cost to get another car of the same age.
Ford - Explorer :: No Response From Starter After Head Gasket Replacement
Vehicle 2007 Ford Explorer Sport Trac with 4.6L
Ok, just did a head gasket replacement. Everything is now hooked back up. Now when we try to restart the car, we get lights, but nothing from the starter. Also the OBDII code puller can't communicate with the car. Also the security light flashes very fast when you try to start.
Ford 6.0L Power Stroke Diesel :: Head Gasket Replacement?
So, I blew my head gasket and have been looking for what to replace it with. From what I've seen, just an OEM gasket would be best.? I'm also putting ARP studs in it, unless there's another brand I should put in it.
View 3 RepliesFord - Mountaineer :: 2005 - Blown Head Gasket - Replacement?
I need walked through the take down to replace the head gasket on an 05 mountaineer with a 4.0. I've never worked on one of these so I don't even know. I havent even seen the engine to know where to start.
View 3 RepliesStratus - Engines - Overheating :: 2005 - White Smoke - Possible Head Gasket Damage?
I have a problem with my Stratus, its the 2005 V6 MotoR 2.7L 24 valves Chrysler LH (USA imported model)
The problem started months ago when a piece that connect several hoses and it have the temperature sensor (coolant air bleeder?) broke, we replaced it for a new one and also changed the thermostat, however the car still overheated (the heat level didnt ascend from half so the fans didn't went on) and the cooling water from the deposit was bubbling, behind the spot where the deposit is, white smoke/steam (?) was coming out and it was making a weird noise also.I changed the water deposit pressure cap, but it keeps doing the same.This happens just 15 min after I turn on the car so the mechanic disconected a piece from the fans, so the fans are always on. Still, after 45 minutes it start again.
The mechanic did a test in the deposit they said that the pressure was very high and it was probably a problem with the head gaskets, it can be that?
Researching for my own, I found that it can also can be a problem with the water pump, and maybe it needs to be replaced
What should I do?Is there any test that I can do to know if the head gasket is the problem or if the water pump isn't working?I don't want to buy the head gasket and realize that the problem was the water pump, or the other way round
Camry :: 2007 Toyota 2.4 Simply Not Starting After Head Gasket Replacement
A 2007 Toyota Camry 2.4 was brought into the shop I work at smoking badly and running terrible. The car had been run hot because the radiator was busted and it blew the head gasket. So I pulled the head and sent if off to the machine shop to have it checked. They said it was badly warped across three cylinder and they resurfaced it.
Now I have everything re assembled, but it simply will not start. All the timing marks on the timing chain line up where they should be. All four coils are firing. Injectors wires pulse noid lights. A few times it has hit and sputtered like it was trying to start but never successfully does.
Civic - Honda :: 1999 - Leaking Oil / Head Cover Gasket Replacement
How much should it cost to have it replaced? car seems to be running just fine but leaking oil.
View 6 RepliesCamry :: Overflow For The Radiator Started Gurgling / Head Gasket Replacement
On my car which never overheated but one day the overflow for the radiator started gurgling and I turned off the car fast and brought to our mechanic and he advised that it was head gasket after changing hoses and water pump. when I first realized the gurgling and shut off the car and never ran it again did i save the engine and replacing the head gasket is a good thing. also did I save the head from warping by my actions?
View 13 RepliesCivic - Honda :: 1996 - Piston Ring And Head Gasket Replacement
Ive had both the piston rings and head gasket replaced on my 96 civic. This isn't for high end upgrades or anything just because i need to pass smog and both needed replaced. I am being told that once i get my car i should drive slow for 100 miles before i take it to smog. Ive read many different opinions on seating the rings but all are for people upgrading their car. I am sure I just got normal replacements.
View 19 RepliesFord - Explorer :: 2007 - Head Gasket Replacement - Remove Motor?
2007 Sports Trac .. Does the motor need to be removed to replace head gaskets? 4.0 sohc
View 1 RepliesFord 6.0L Power Stroke Diesel :: 2006 F350 - Head Gasket Replacement
I'm going to be doing head gaskets on my 2006 F350 6.0. I know I need the head bolt tool and head lifting fixture. I have the tool to release the injector wiring plug from the head. Are there any other specialty tools I need? I saw in Hot Rod magazine a few months ago there was a new head gasket for the 6.0. Unfortunately I don't have the magazine anymore. I can't remember the brand of gasket. I know everyone in the past has said use OEM Ford head gaskets. Lastly, can I do the head gasket job and put studs in without pulling the cab or HVAC box?
View 7 Replies