Golf IV R32 :: Ticking Sound At Idle / Rotating Squealing In First Gear
Just seeing if I can get some insight as to whether this is normal or not since my MKV R didn't have anything like this.
1. At Idle Ill have a ticking sound that speeds up and slows down on its own. It seems to be coming form the pulleys side of the engine and it doesn't matter whether the car is warmed up or cold. My engine temps have been pretty steady even with 100+ degree weather and traffic and visually cant see any issues i.e., leaks, cracked lines etc.
2. In first gear Ill get a rotating squealing sound when i let off the gas. The RPM's don't really matter and its definitely is more noticeable before the engine is warming up but it'll still do it at fully warmed up every once in a while. Oh yeah and it ONLY makes this sound in 1st.
As far as I know the pulleys and the majority of the car is stock.
Golf IV / Jetta IV :: 2003 Car Shaking And Had A Ticking Sound At Startup
So I was on my to get some food and when started my car it was shaking really bad and had a ticking sound. I popped the hood and the engine was shaking violently, it drove fine one day to walmart and the next day started doing this. I am thinking it could be the coil pack because it was raining when I went to start it.
View 2 RepliesGolf IV / Jetta IV :: Ticking Sound Coming From Belt Side Of Motor?
Recently my GTI has been ticking, but it is only between 1 and 2 thousand rpm. After 2k it runs fine and doesn't make the sound. Local tuner suggested an oil pressure problem (not using the proper oil) but I am using the proper oil. It has been like this for over a month now and nothing has come of it. It is coming from the belt side of the motor and sounds like plastic ticking. Could it be a belt?
View 7 RepliesGolf IV / Jetta IV :: 2001 - Cracked Oil Pan - Loud Ticking Sound At Idle - Engine Blown?
I own a 2001 Jetta 1.8t with Gti front end. So I was driving downtown the other day and I bottomed out really hard and cracked my oil pan. I didn't realize it was cracked and leaking so I drove it home, drove fine with no issues at all. When I got home I parked it and went inside and in the morning I came out and tuned it on for maybe ten seconds. It made a really loud ticking sound that was constant and oil pressure was almost all the way down. So I shut it off and looked and saw the oil pan. I fixed the oil pan yesterday and started it up and it sounded really good and drives fine. But I've been hearing a pretty decently loud ticking sound when everything's up to temp and warmed up. The ticking is only at an idle and it drives like it use to just sounds bad at an idle. Some people think it's my oil pump and tensioner, some people thing I ruined the turbo and possibly internals.
View 4 RepliesGolf IV / Jetta IV :: Won't Driving Even Though It Is In Gear
My car is a MK4 Golf 2.0L .. Standard I was stopped at a stop light and I started going everything was fine til i got to 3rd gear. I was in gear but nothing was happening I would push the gas and you could hear it turning but I wasn't moving the only thing is i could hear a little grind. Could it be my clutch has gone bad or maybe the cold weather freezing things up....
View 9 RepliesGolf IV / Jetta IV :: 2005 - Clunk Sound When Going Into Gear
So I have a 05 mk4 golf 2.0 automatic. Ive noticed that when i take it from park to drive the car shakes and makes a huge clunk sound like I just got hit by something. Turns out it was a motor mount, I think they call it the dog bone cause its attached to the body & engine of the car. So it was replaced but the car still does it. But not as hard & not as much. Before when I revved the car it would kind of shake and dance. Since the replacement it parks still when I rev it. But that noise is still there. Someone told me it could be another mount or the torque converter.
View 2 RepliesGolf IV / Jetta IV :: Humming Sound When In Gear And Accelerating
. MK IV 1.8T .... Title says it all ....
View 14 RepliesGolf IV / Jetta IV :: Hesitation While Driving At Consistent Speed In One Gear
Recently I switched from Revo software with 440cc injectors to Unitronic with Siemens 630cc injectors. After swapping, the car has developed a hesitation issue. It only happens when driving a consistent speed in one gear, for example going 45 in 5th, the car will feel jumpy and hesitate to accelerate with a seeming loss of power. Replaced spark plugs with new ones and the problem still persists. Problem never happened with old software and injectors.
View 2 RepliesGolf IV / Jetta IV :: Check Engine Light Came On When Driving In 3rd Gear
I recently got a 2001 Mk4 GTI from carter Volkswagen in Seattle with 113k on it last friday (it did come with the car fax). I drove it back home to Wenatchee and it ran fine and is still running fine... I think. Today as i was coming home from school the check engine light came on when i was in 3rd gear and the car just wasn't driving as smooth as it was the first day (it felt as if i was driving over really really small bumps or like something was loose and was moving around a lot).
When I would get to a red light and be in first gear the light went off but it came back on as i would shift into 3rd and stayed on when i got into 5th. It recently had its oil changed at 112,000 miles. Also when the car is just idling the tachometer is going up and down a little bit, it is idling at about 600-700 rpms. I got this car because i didn't want to have a car with problems any more (I had an 88 Isuzu Trooper before).
Golf IV / Jetta IV :: Automatic Tiptronic Transmission - When Driving Does Not Engage On 4th Gear
I have a problem with automatic tiptronic transmission my golf MK4 TDI 1.9 2001, it dosent engage on 4th gear when i am driving, the codes that I received for this foults:
01316 - ABS CONTROL MODULE
49-10 No communication- Intermittent
00652 - Gear monitoring
27-10 - Implausible Signal - Intermittent
Golf IV / Jetta IV :: 3rd Gear Will Grind When Driving For More Than Half An Hour / Over 2800 RPMs
I noticed through careful investigation that my 03 GTI 1.8T (180,000 KM's or 111,850 miles) will grind 3rd when in these conditions:
1. When the car has been driving for more then half an hour and everything is hot
2. When the car is over 2800 RPM's while hot (ie. getting on a highway)
Now I know lot's of people blame syncro's and yes I could see that my car has had 8 previous owners so I can't say they all shifted perfect. But what I do know is that when I downshift from either 4th or Neutral it will never grind even when I don't Rev Match or "Blip" the throttle. So it can't be syncro's in my opinion.
So what I've done to the car to rule out some problems were:
- Change the gear oil from what ever it was before to Royal Purple 75W-90 (NO luck.)
- Then I added a short shifter and adjusted my cables properly (still No luck)
- Finally I noticed my shifter was sloppy and one of my bushings were torn so I bought 42 DD's metal bushings and the shifter did stiffen up a lot, however!!! (No luck)
I know it's not my driving technique because I watch my foot depress the clutch fully and then I gently push it into third. I also know I'm shifting correctly because I can double clutch and normally shift through every other gear properly without any grinds or clunks. Just the devilish 3rd gear.
I would like to hear the solution. I'm going to change the oil one more time to Redline MT-90 and see how that goes, but if that doesn't work I might just tear apart or get a new tranny.
Golf IV / Jetta IV :: 2004 - Battery Is Not Charging / Clicking Sound / Car Won't Shift To Next Gear
First time owning a VW (Nissan guy but got love for the VW). So I am having 3 issues
1. This is the major issue. My battery is not charging. I have replaced both Alternator and Battery so i know the issue isnt there. I took it to an import shop (I can't diagnose electrical issues to save my life) they told me the positive terminal cable needs to be swapped out. Before I put down money for the part and swap it out I wanted to know if this sounds correct (or at least like a possible solution)
2. While driving the turn signal clicking sound will randomly come on from 5 seconds - 2 mins and then turn off. Some days its worse some days it's not.
3. I think this is a solenoid issue but maybe I am wrong. For about a week the car would not shift to the next gear unless RPM's hit 6k. I mean I would have to floor it to get the thing to shift to the next gear. It shifts down fine. I haven't had the issue in a few weeks but I would rather take care of it if possible.
These are all electrical issues and it would be awesome if they all were related but i'm honestly only concerned about the first one as I can deal with the annoyance of the second 2. This is my first VW and so far me and my family love it.
Golf IV / Jetta IV :: Loud Metal Scrapping Sound While Driving
Driving my golf to take daughter to airport, all or a sudden there is this very loud metal scrapping sound. So I pull over and see this metal bat hanging from under the car and rubbing on the ground. At this point I'm not sure what it is and cant really budge it or dislodge it.
Anyway called for roadside assistance and a towtruck comes. The guy lifts the car a bit and is able to free this metal rod. Its about 1.8m (6ft) long and about 5mm thick (approx). Couple of photos below. Not sure if its part of suspension, steering or something else. Did have a mobile mechanic today doing some work on the cooling system (flange) he had to jack up the car.
[URL] .....
Golf IV / Jetta IV :: 2003 - Jerk Or Clunk Sound When Driving Down The Highway At About 65
Here is my new to me 03 Jetta 1.8T Wagon. This all started yesterday driving down the highway at about 65, I drove over a bump and there was what felt like a jerk. I lost the radio right away and when stepping on the accelerator it didn't seem to go over 3500rpm. I got a few miles into town taking it easy and it died as I pulled up to a stop sign. I was able to get a jump and get it running again.
This was the first jump of the day...When we popped the hood to jump it I noticed that the red wire coming off the positive battery terminal to the power block was frayed and corroded, so I cut the bad end off and stripped the wire to get a good connection. Left the car on a battery tender just to make sure the battery was charged and came back after a few hours and it started right up. Problem solved right?! Wrong...
Probably 10 miles down the road the same thing happens, a jerk or clunk sound, lost power and the call stalled out. Called family that was close by and tried to jump it again 'cause that worked the first time... Got a few miles down the road and it happened again!
Here's a picture of the gauge cluster and all the lights that lit up.
Long story short the car had basically no lights, power, for the windows/radio/turn signals/headlights etc... but was putting along at about 5 mph. I was out in the country and about 5 miles from home so I was just focused on getting it in my garage. It died again and a jump wouldn't even get it going the next time. I did some reading on my phone and it seems like the power block can be problematic, I took a picture of that because there is some obvious melted plastic on the large black wire.
I have a friend with a vag com, and he was able to come out and read the faults and then clear them and the car started right up just fine off a jump pack. We did get it home, but today I'm getting the same issues. I am trying to trace that black wire to its origin to see if there is corrosion or a loose connection there but I have no clue where else to start....
I start a new job on the 21st of July and this was meant to be my commuter as my truck gets terrible mileage...
Dodge - Ram2500 :: Ticking Sound Only In Gear With Gas Pedal Being Pressed
My 2004 Ram 2500 recently starting making this ticking sound. It only happens when it is in gear and gas pedal is being pressed. Sound like it's coming from the gas pedal area on the other side of the firewall.
While driving, if step on the gas hard, the ticking sound would also trigger a metal vibrating sound. It sounds like a very stiff piece of metal is vibrating, not a loose heat shield sound.
I can't step on the gas in gear and look in the engine or under the truck at the same time. And I also don't think it would be wise to do that. The thought of being under my truck while it is in gear and gas is being applied is not a safe or smart thought.
Ford F-150 (2004-2008) :: Clicking Or Ticking Sound As Driving
I am 98% sure my 17" chrome clad wheels are making a clicking or ticking sound as I drive. I took off the plastic center cap and the noise changed.. it's less than constant now.
View 3 RepliesCorolla / Matrix 2009-13 :: 2010 Toyota CE - Ticking Sound While Driving
I recently took my 2010 Corolla CE to my dealership and had some minor work done on the brakes (rust cap cleaned, calipers machined as well)
The new problem now is that I hear a ticking sound while driving as if something is touching.. The Technician at Toyota said there was still 70% on the pads and 80% left on the rear shoes.. Encountered a ticking sound while driving along?
Golf IV R32 :: Ticking Noise While In 1st And 2nd Gear At Low RPMs
Weird noise - searched .. couldnt find anything mainly because its kinda hard to describe it .. While in 1st and 2nd gear at low rpms while barely giving it any gas there is this "ticking" noise coming from under the hood .. it almost sounds like .. lets put it this way .. it sounds like a wire coat hanger .. tapping an aluminum can .. how about that .. I was told it is my flywheel bolts backing out and was a problem around 65-75k .. and I am at 70k at the moment... Should I just bite the bullet and get a new flywheel and if so ..[IMG] [URL] ....
View 6 RepliesFord 6.0L Power Stroke Diesel :: 2005 - Faint Ticking Sound / No Compression / Timing Gear Failure
2005 6.0 SuperDuty ... I was driving my truck on the freeway, no issues. Started hearing a very faint ticking sound, then the engine died. Pulled off to the side. tried to start it, and it turned over very rapidly, with no compression. I'm thinking "Timing Gear".
Had it towed to a Ford dealership near the incident. I told them what i thought it may be, and the mechanic thought it "May be possible". not very confidently....
I authorized them to remove the engine, and look. Sure enough, the gears were toast. This is the difficult part.
The service manager is a young kid, (I can tell from talking to him a hundred times on the phone), and is telling me "My Cam(s) are ruined, and the valves are bent, because the metal from the gears went through the motor. I told him to stop. put the truck outside, and wait. So, I have a couple of questions. other than i don't have Cam(s).
1. Is the 6.0 a clearance type motor? (will the valves impact the pistons, if the timing gears fail).
2. Will the metal from the timing gears get into the motor, or fall into the oil pan?
There were no loud noises, when the engine died. I had the engine bullet proofed at 101,000 miles, it now has 250,000. The truck is still solid, so worth fixing?