Golf/GTI VI :: 2010 - Airbag Control Module Coding

Need coding info for 2010 Jetta sedan 2.5 Air bag control module. The part # is 1K0 909 605 AD/004, Component # Airbag VW8R 036 8900. I am using a Vag-Com version 10.6 ....

View 1 Replies

Passat (B6) :: Instrument Cluster Coding Causing ABS Module To Throw Codes

I'm set on having the European parking light feature (when the car is parked and you walk away from it). For those of you not familiar with it, by changing the Instrument Cluster coding from a 2 (USA) to either a 1 or 4 (UK or Great Britain), you can turn the car off, hit the left turn signal assuming you are parked on the right side of the street, and after getting out and locking it the 194 amber front bulb and the LED red rear ring stays on. This aids in traffic seeing your car parked on the side of the road.

Problem is that once you change the country, you get this in the ABS Module:

Address 03: ABS Brakes Labels: 3C0-614-095-C2.clb

Control Module Part Number: 3C0 614 095 S HW: 3C0 614 095 S

Component and/or Version: ESP 440 C2 H015 0004

Software Coding: 0013752

[Code] ....

What changes need to be made in this module to avoid this? The pop-up window in the coding section doesn't say anything about different countries so I'm not sure which numbers need changed.

View 7 Replies

Golf VI R :: LED Tail Coding - Got Check Right Rear Light Warning?

Installed last week, LED no fog. Everything worked great but I had the bulb out error. Yesterday, I had the coding done and I now have an issue. Worked fine when I left the dealer and this morning I have a "Check Right Rear Light" warning. The right rear is no longer lit. Back up light works, tail light does not. I think the dealer changed byte 18 to 21 but also changed the setting from NA to something else... maybe ROW.

View 9 Replies

Passat (B5) :: ABS Module Replacement?

Looking for info on replacing ABS module themselves? I was wondering how difficult this job can be.

View 4 Replies

Accent LC (2000-05) :: Immobilizer Control Module Replacement?

2004 Hyundai Accent

- Car won't start ...
- Remote key unlocks the car fine
- When put the key in the ignition and turn 'on' the little key indicator on the cluster doesn't come on.
- Left overnight and tried again in the morning, key indicator come on and then disappeared and wasn't able to start car.
- Key indicator now won't come on.

I spoke to mechanic and he said replace the immobilizer control module and reprogram key..

View 5 Replies

Prius C :: 2012 - A/C And Fan Won't Turn On After Replacement Of Body Control Module?

I have a 2012 prius c and just replaced the body control module - no problem there, but now the ac and fan will not turn on. Fuses visually look ok (I don't have a tester) and they had been working previously. I live on Molokai - no prius mechanic on the island so I do my own repair when I can - how to diagnose the problem?

View 4 Replies

Ford Brakes/Suspension :: ABS System Failed - Module Replacement?

I took my 2009 F150 XLT 4.6 into the dealership to have front and rear brakes replaced at 77,000 miles. Brakes were down to 3mm. They also did a complete brake flush. They called after the brake job was done and said the ABS system failed and needed to replace ABS module. Given I didn't have any problems with ABS before bringing it into the dealership, what is the chance the brake repair screwed up something with the ABS that they caused?

View 5 Replies

Ford F-150 (2004-2008) :: Fuel Pump Module Falling Apart / Replacement?

So the fuel pump module on my truck is falling apart, and I figured I might as well replace it....

View 10 Replies

Prius (2004-09) :: 2006 (125K Mile) Traction Battery Module Replacement

I just replaced two bad modules in my 2006 (125K mile) traction battery. I replaced one other module a year ago successfully. I installed the battery last night and tried to charge it with my Hybrid Automotive charger. The charger would not go into charging mode. So I decided to check the idiot lights on the dash - plug in key and push the power button - every light on the dash lit up and stayed lit. The battery charge indicator in the display on the dash had most of the blue bars filled. I left the power on for several minutes and the engine never started (usually does regardless of state of battery charge for a minute or two when you first power up the Prius).

View 19 Replies

Prius (2004-09) :: Random Misfire Detected / Individual Battery Module Replacement

I have a 2005 Prius Gen II with 114,000 miles on it. I was driving last week when it suddenly displayed a Christmas tree of lights that included VSC and the triangle of death....and of course the battery fan kicked into high gear.

Hooked it into a OBD II scanner:
P0A80 "Hybrid battery pack over temperature"
P3019 "battery block 7 becomes weak"
P3000 "DSL solenoid circut low"
P0300 "random misfire detected"
P000A "engine position system performance- bank 1"
Also C1241, C1242, c1249, c1259, c1310, c1357

I went ahead and cleared the codes. The angry lights went away but came back within minutes of driving. The car went into limp mode but I was able to make it home.

View 19 Replies

Ford F-150 (2004-2008) :: Airbag Light Flashing - Control Restraint Module Replacement

2004 f150 - Airbag light was flashing. Received recall letter. Dealer replaced a wiring harness. Dealer did not confirm functionality of airbag prior to leaving shop. Light continues to flash. New diagnostics from dealer says error code 1885 - the control restraint module needs replacing in P&L. Does the code match the fix? Can a novice mechanic replace the module?

View 2 Replies

Golf/GTI VI :: 2010 - DSG Slipping After Clutch Replacement

I own a 2010 GTI stage 2+ with 430hp, I just had a clutch replacement from

dodson motorsport that can handle more power up to 700hp, before the replacement I had serious slipping, when I was pushing the car from 4k rpm, the "DSG OVERHEATING" blink on the dashboard, now after the replacement and the dsg software I still have slippage, do you think it comes from mechatronic? The tuners said that might be the mechatronic due to the fact that the two valves of pressure does not send too much oil to the clutches and creates slippage. Should I change only the two valves or the mechatronic complete.

This was the stock "burned" clutch

And this is the new DODSON MOTORSPORT CLUTCH PACK FOR 700whp

View 12 Replies

Ford F-150 - 1997-2003 :: PAT Module Communicates Wirelessly To Key Module Under Steering Column

Took my 99 XLT super cab to a Ford dealer to have a new key made (I have only one so can't do it myself). I was told the PAT (Passive Anti-Theft) module wouldn't communicate with their system.....

As I understand it, the PAT module communicates wirelessly to the key module under the steering column. Since the PAT module is obviously working (the truck cranks, starts and runs fine). What are they talking about?

View 14 Replies

Passat (B6) :: Ignition KEY Fob Coding?

I bought a fob from eBay.. but I couldn't find anywhere the coding procedure.

View 4 Replies

Passat (B6) :: No High Beams After HID Coding

I just had my car coded for aftermarket HIDs and i have no high beams and a bulb out indicator on. did i miss a step in the VAG coding or will the high beams work when i put the HIDs in?

View 6 Replies

Touareg :: TPMS Old Coding Does Not Work With Controller

Have one of at least four different software codes, depending on your version of the TPMS controller. For the old controller (which I used to have, and which is present in, for example, air cooled rig), the coding is 0012339. (There is also 0010339.) The new coding below is only if you have coding 0210390 and possibly if you have coding 0211390. The old coding does not work with my controller, and I do not know if the new coding works with the old controller.
Use VAG-COM:

1. to put the option to turn TPMS on/off into the MFI.

2. to get "inflation info" back into the MFI.

Change the software coding to:

0110390

View 24 Replies

Touareg :: Blinker And Rear Fog Light Coding?

I bought myself a nice brand new Touareg 2011 (7P). I have ordered German accessories in order to activate the amber blinker instead the red and the rear fog light incl. the light switch. But now I'm stuck at the coding in order to activate the functions. Any clue which CU and address I have to change in order to teach the brake light not to blink and the fog light to function?

View 3 Replies

Elantra MD (2010-15) :: Where Is TPMS Control Module Located

Not the sensors themselves, but the actual control module in the car?

View 1 Replies

Ford F-150 (2009-2014) :: 2010 - Airbag Module Location?

Where the air bag module is located on a 2010 ford f-150?

View 4 Replies