GTI 337/20th Anniversary :: 2005 - GLI High Beam Doesn't Work?
I cant seem to diagnosis this and its driving me crazy. I've got a 05 GLI w standard 9007 headlights. All the lights work (fogs, drl, lows) except passenger high beam. The bulb is NOT burnt out either.....
View 6 RepliesGTI 337/20th Anniversary :: Almost Staples Out And Gas Doesn't Work When Use Turbo Or Bring RPMs High
So my 20th runs completely fine until rain is involved.. Once it rains and I bring my rpms high or use my turbo it almost staples out and the gas doesn't work.. Also I notice it shoots out a puff of white smoke and my. Turbo doesn't spool at the way.. It basically tries and just does something like psh psh psh psh like second spools? Could water get in my. Turbo or something.
View 19 RepliesGTI 337/20th Anniversary :: 2003 - Key Less Entry Doesn't Work?
I have a 2003 AE and my keyless entry doesn't work. I have tried all the instructions that i can find on the internet and my manual. I replaced the key in my fob and had a locksmith check and its sending the 315hz signal just like it should. before i take it to the dealer is there anything else i can do? is it my car and how and what do i need to check? what part of the car accepts the signal?
View 6 RepliesGTI 337/20th Anniversary :: Gears Sounds Like Car Is Shifting But It Doesn't Move
First off i couldn't get the car into reverse to back out of a convenience store and then i let off the clutch to try and pump it again and the car just dies. drove just fine up until i parked. Now when i try to move through gears it sounds like it's shifting but the car doesn't move. The car does have a stronger clutch and unitronic chip if that would have to do with anything.
View 13 RepliesGTI 337/20th Anniversary :: Parking Brake Doesn't Engage When Lever Is Pulled
So my parking brake doesn't engage when the lever is pulled. The light lights up on the dash saying the parking brake is engaged but the brake I not engaged. It hasn't been a huge problem for me since my Jetta is a 6-speed but I would like to fix it some time soon. Looking for a DIY? I did a quick search and didn't find anything really.
View 3 RepliesGTI 337/20th Anniversary :: Clutch Not Working / Grinding Type Noise And Doesn't Go Into Gear
So I picked up a 20th today. The clutch has 30k on it its an oem luk. Drove fine most of the ride home then i went to shift and it wouldn't grab. Got it towed home. trans goes into all gears fine. When you put it in first and try to go it starts to roll but just makes a grinding type noise and doesnt go into gear. I didn't hear any chatter until maybe 10 miles before this happened. I still have pressure in the clutch pedal as well. when the car is in neutral running there isnt any noise which makes me think it isnt the throw out bearing.
View 2 RepliesGTI 337/20th Anniversary :: Battery Died Quickly And Car Doesn't Start Anymore - Code P0688
My battery died quick and my car doesn't start anymore it starts but it's turns right bak off I scanned it and code p0688 came out something about a relay.
View 1 RepliesGTI 337/20th Anniversary :: Temp Gauge Doesn't Work - Passenger Door Only Opens From Inside
I just picked up a Black 20th tonight. All stock with 48,000 miles. I'll get some pics up asap. But for now I'm gonna be lurking around trying to work out the kinks of the car. The Temp gauge doesn't work and the passenger door only opens from the inside when first unlocked.
View 15 RepliesGTI 337/20th Anniversary :: 2004 - No Reverse Light / Lever Inside Doesn't Reach Connector From Switch?
My reverse lights are out on my GLI 2004, i bought a new reverse light switch thinking that would fix it but no.......
I then checked for power in line and by jumping it and the light go on
So Switch is goodLine as power
But as soon as it's intalled no go, light out.... it seem's like the lever inside doesn't reach the connector from the switch.
GTI 337/20th Anniversary :: Can't Turn On High Beams?
I have a BMP 20th and I notice that I cannot turn on my high beams but I can flash them. What the problem could be? I was planning on installing my OEM HIDs tonight but now I am wanting to get this fixed before I put them in.
View 2 RepliesGTI 337/20th Anniversary :: Car Starts With High RPMs
I bought my gti about a month ago and every time I warm it up in the morning or any time it has been sitting over a long period of time the rpms sit at about 1300 until about a minute and it goes under 1k ... I am not to familiar with this issue.
View 14 RepliesGTI 337/20th Anniversary :: Way To Bypass The High Beams?
My HID's are only low beam and it reconizes it as high beams and high beam only...anyways i can rid of that
View 3 RepliesGTI 337/20th Anniversary :: ASR Light Not Coming Up At High RPMs
So I purchase this 20th couple day ago ( love it alot !!) but i noticed that the asr light stop working. When I press the asr switch the light comes up which i think its telling me that works. But its supposed to work when you go high rpm's right ? just wanna know since i am a totally newby in the 1.8t engine ...
View 11 RepliesGTI 337/20th Anniversary :: Idling High At 1.5 And Brakes Feel Like Going Out
I just recently replaced my radiator and cold air intake. right after I did and I drove it, my car was idling high at 1.5 and the brakes feel like they are going out. I am kind of confused as to how this is even related.
View 2 RepliesGTI 337/20th Anniversary :: Engine Sputter At High Boost
When I hit the gas and my turbo reached high boost (15 psi and up), it would slightly sputter and make an odd sound. I even noticed my exhaust made a different exhaust note than usual. While it sputtered the CEL began flashing. I then drove it normally (not high boost) all the way home and it drove completely fine. I'm gonna try and get my codes checked tomorrow.
View 9 RepliesGTI 337/20th Anniversary :: Low / High Beams And Blower Fan Not Working?
So I pullled into a reststop to relieve myself and when I drove off none of my lamps (high,low,or fog) worked. Along with them my blower fan does not work nor the rear defoggers, wipers, spray with wipers, turn signal (hazards do work though). Is there a fuse or relay that connects them together?
View 2 RepliesGTI 337/20th Anniversary :: Installed HIDs, No Longer Have High Beams
Ok so I installed HIDs in my stock housing, I no longer have high beams since I bought the low beam ones only and I think since there is nothing running to where the high beam wire on the oem harness my high beam light on the cluster is stuck on no matter if its on low beams or high beams and its causing my Fogs to not work.
View 7 RepliesGTI 337/20th Anniversary :: 2005 - Stalls After Running For A Bit / High Idle
The car will start up fine, run for 10 - 20 min and stall. I will try and restart it but i takes atleast 7 or 8 sec of the car just turning over before it slowly fires up. Which results in a high idle 1200-1400 rpm and the car stalling another 5 min later.
Ive fixed my o2 sensor the wire was cut, replaced the fuel filter, and got a eurojet lower pcv hose for the vacuum leak i found.
GTI 337/20th Anniversary :: Rough Transmission - How To Fix It
my 20th feels a bit off when im shifting. First to second can feel very rough (just not smooth at all but it does shift easily but takes more effort for a smooth shift. second to third is also a bit off but not as much. all other gears shift normal and smooth.
View 5 Replies