Ford Excursion :: Removing Ranch Hand Front Bumper?
I have a Legend Ranch Hand Part# FBF991BLR front bumper. I am debating removing this as I don't really need it for my driving and the extra 450 lbs and hanging out there in the wind can't be good for the suspension and economy. Any thoughts on this? What all come off to install one of these things that I would need to replace with stock?
View 14 RepliesFord Super Duty (1999-2016) :: 2004 - Cut In King Ranch Leather?
I've got about a 1 inch clean cut (looks like a knife did it) in the passenger seat bottom on my 2004 F350. Any tips on fixing this before it gets worse? I've thought about super glue, but I don't think that would look too good and will be tough to get right.
View 7 RepliesFord Super Duty (1999-2016) :: King Ranch Leather Care
What is the best thing to put on my King Ranch leather? Got a 2007 and want to get some good stuff for it.
View 4 RepliesFord Super Duty (1999-2016) :: 2005 - Rusty Fenders At Wheel Wells
My rear fenders are pitting and bubbling with rust on both sides. I had my local body shop have at it and it looked good for about 6 months. Now bubbling up again. I see in older trucks like mine that this is a common problem. I'll probably have to replace rhr box if I really want to fix it? Or just learn to live with it.
View 14 RepliesFord Super Duty (1999-2016) :: Truck Shut Down When Making Right Hand Turn
Made my right hand turn . Truck shut down. Will turn over no start. Cannot hear fuel pump turn on.
View 7 RepliesFord Super Duty (1999-2016) :: Pop Noise When Hitting The Brakes
Got a POP noise when I hit the brakes. I have to apply some pressure for it to make the sound. Does it once when going forward. Doesn't do it again until I drive a few minutes, then it does it again.
If I go back and forth between reverse and drive, it does it every time as I hit the brakes, but only once until reversing direction again.
Takes some moderate pedal pressure to make the noise. If I turn the steering wheel to either side, it doesn't make the noise.
I've gone over the brakes, nothing there is wrong, and besides it wouldn't go away when I turn the wheel. Nothing is loose in terms of tie-rod ends, wheel bearings, nothing.
It's not bad enough yet to be able to see movement in the ball joints when the wheels are off the ground. Is this the ball joints?
Ford Super Duty (1999-2016) :: F150 Bumper Same As Of F250?
Do f150 bumper is the same as my 03 F250?
View 5 RepliesFord Super Duty (1999-2016) :: Lights To Fit In Bumper Under Headlights?
On the 99-07 front bumper i would like to add driving lights in the bumper under the headlights something like the 11 up bumpers have...
Looking for a light and housing that possibly could be installed with out having to re chrome, so it could have a bezel to cover cut edge of bumper...
Ford Super Duty (1999-2016) :: 1987 - Shakes Uncontrollably After Hitting Bumps?
My truck has been shaking/jiggling like crazy after hitting a quick succession of bumps and potholes and won't stop until I bring my truck to a complete stop. Happened 4 or 5 times in my old '87 F250 over a period of months, happened 4 times starting yesterday with my '02. Heard it may be the steering damper shock.
View 9 RepliesFord Super Duty (1999-2016) :: Slight Wobble After Hitting A Bump In The Road
I purchased the truck from a used car lot about 3 months ago and after driving for a few thousand miles I am feeling a slight wobble after hitting a bump in the road. Here is my truck set up:
- 2011 Ford Lariat F250 4X4 FX4 6.7 ltr
- 67400 miles
- Tires stock and great tread
- Rancho steering stabilizer kit
- Rancho Shocks
- Rear air bags
It does appear one of the rancho stabilizer dampers is leaking slightly. Why would the previous owner install a rancho stabilizer kit? Is it because of the rear air bags?
Ford Super Duty (1999-2016) :: Replacement Of Rusty Rear Bumper?
my rear bumper is pretty much eaten up, too.
How difficult is this to replace?
Good source for rear bumpers? Just something stock; don't need anything wild, crazy, lighted, etc.
It's a work/hunting/fishing/hauling truck. That's all.
Ford Super Duty (1999-2016) :: F250 - Front Bumper Bent?
I bent my front bumper. Every time I look on amazon or ebay , when I put in my year, model, engine, it says their bumper won't fit. Mine has the 3 rectangular openings, 2 have the holes for mounting and tow hooks. It is chrome with the gray plastic or rubber bottom.Xlt. Also what part is the valance?
View 7 RepliesFord Super Duty (1999-2016) :: Rear Bumper With Exhaust Cut Outs
While trying to remain positive regarding my current truck fiasco, I was thinking about future mods. I really like the way Dodge has the exhaust cut outs in the bumper and was wondering if anything like that exists for our trucks?
View 3 RepliesFord Super Duty (1999-2016) :: 2008 Bumper Fit A 2006 F350?
Will a bumper off a 2008 F350 fit on my 2006 F350?
View 7 RepliesFord Super Duty (1999-2016) :: Horrible Whine When Turning Wheels Or Hitting The Brakes
1997 Super Duty 7.5 has a horrible "whine" when turning the wheels or hitting the brakes. Weird thing is, when I have the front end jacked up it goes almost completely away when turning the wheels. It is still there, and just as loud when I hit my brakes, but the brakes never were as loud as it was when I turned the wheels. I am guessing it is something to do with the steering gear or tie rod ends or something that I have absolutely 0 experience with....
More info on the problem: PS pump was always a bit noisy, but after the truck sat for a while (around a year, drove it every couple months for a few miles) it was ridiculous, so i replaced the pump, cycled all the old ATF out, made sure I had good pressure coming all the way back to the pump, several times. Never ran it dry.
The steering wheel (with wheels on the ground) kicks back on me and has a LOT of play in it before the PS pump kicks in and starts screaming. Jack the front end up, steering is nice and tight, no play, noise is there a BIT (with the hood up and cap off the PS pump) I would imagine under normal driving conditions i probably wouldn't even hear it much, if at all.
With my very limited mechanic knowledge I would assume that something is making it very hard for my wheels to turn, which is straining my PS pump, but what!?!?!?!?
Ford Super Duty (1999-2016) :: Truck Pulling To Right When Hitting Brakes And Occasionally Brake Would Get Hot
My 02 F250 has me baffled. For a while the truck would pull to the right when hitting the brakes and occasionally the brake would get hot. To try and remedy this I put a new caliper and hose on the right front corner a new hose on the left front side. The truck still pulled right and the pedal got spongy even after bleeding the brakes 3 times. I got to checking the rest of the brakes and found a seized slide pin on the left rear. Got that fixed and still pulling right with a soft pedal. I've checked all of the sliders and none are seized. I am lost and I cant stand the soft pedal!
View 4 RepliesFord Super Duty (1999-2016) :: 2014 F250 - Front Bumper Sagging
I got a 2014 F250 SD w/ 6.7 diesel. Since if owned the truck the front bumper has slowly started to sag at both driver and passenger side. Dealer says there is no adjustments for it.
View 14 RepliesFord Super Duty (1999-2016) :: 2014 Front Bumper Fit On 2001 F350?
Do a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 RepliesFord Super Duty (1999-2016) :: 2001 F250 - New Rear Bumper Conversion?
Ok I have a 2001 f250 SD with 7.3 and my rear bumper is dented and badly and warped. The steel frame mounting part of it is straight and fine. I found a "kit" on eBay that has just the end caps and plastic top cap for a 2008+ style trucks. Would those caps and plastic fit on my frame mounted section (what the actual name for the part that the chrome bumper actually screws into that mounts it to frame) ?
View 1 Replies