Ford Super Duty (1999-2016) :: 2012 F250 - Coolant Change Required Message At 59 Kms?
My 2012 F-250 gas just started showing this message that a coolant change is required. I am just over 59k miles. Is this a timed message all F-250's get, or is it an indications something is wrong? The truck does not run hot, it keeps perfect temperature even when I am towing my 13klbs boat.
View 3 RepliesFord Super Duty (1999-2016) :: F250 V10 - Mileage Gone Worse
I have owned a 2003 v10 triton f-250 now for 8 years and when I first got the rig I was getting 11.5 mpg mixed driving. As the years and miles went on the mileage got worse and worse and now I'm lucky to get 4.5 mpg.
View 14 RepliesFord Super Duty (1999-2016) :: 2014 F250 - Fuel Mileage While Towing
My 2014 f250 4x4 crew cab with 6.2l gasser only gets about 7.5-8 mpg at 65 mph while pulling my 27' bumper pull travel trailer. I know that thing is basically a wall trapping the air but is there anything I can do to gain a couple mpg more? I can average about 15 mpg at 65 mph without the trailer on the highway.
View 14 RepliesFord Super Duty (1999-2016) :: 2008 F250 - No Power At All Loaded And Unloaded And Really Bad Fuel Mileage
I've got a 08 f250 ext cab long box with the 5.4 gas. I know I know 3/4 ton gas. Trucks got NO power at all loaded and unloaded and really bad fuel mileage. Driving like a grandpa in town I'm getting 7mpg on the hwy unloaded I get 9 or 10mpg loaded on the hwy the trucks working way harder than it should and getting 6mpg.... I'm wanting to swap the 5 4 for a 6.0. Reason I saw 6.0 is my buddy's done egr delete. Bulletproof oil cooler head studs and a edge with attitude chip and has great power and reasonable fuel mileage. How hard is it going to be swapping the motors.
View 10 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Oil Change Required Message Reset
For those of you struggling like I was a few minutes ago... Here is a procedure that worked for me.
1. Key ON.
2. Select OK to get rid of OIL CHANGE REQUIRED message.
3. Scroll down to SETTINGS and push OK.
4. Scroll down to VEHICLE and push OK.
5. Scroll down to OIL LIFE RESET and push OK.
6. Scroll to any % other than what you want and push OK.
7. Scroll to what % you want and push OK.
8. Key OFF.
Ford Super Duty (1999-2016) :: 2001 F250 - Rear End Differential Fluid Change
I have a quick question. I am gonna change the fluid in my 01 f250 rear end. it has 410 gears and a limited slip diff. if i use full synthetic gear oil do i have to add the limited slip additive or just the 75w-140 full synthetic gear oil.
View 14 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Manual Button Stuck On Max A/C And Would Not Change
I just bought a 2011 F250 Super Duty 6.2L and the manual A/C buttons were stuck on Max A/C and wouldn't change. I fiddled with every switch on the dash thinking it might be a stuck switch and eventually all the buttons started working. This truck has SYNC, which works fine, and I can't find anything else wrong with the truck.
When the buttons are lit, it blows good and cold, in A/C and Max A/C. The problem I'm having now is that they won't light up at all. Visual inspection shows nothing obvious under the hood, and it has a charge of freon. I drove and it id working just fine, but stuck on the Max setting. I'm thinking electrical gremlins, like stuck switch or a relay...
Ford Super Duty (1999-2016) :: Huge Oil Leak From Top Rear Of Motor Not ICP
I got to work I parker her on the 6th floor of the parking garage. While unloading I smelt oil (but didn't act on it due to me running late) so I walked away towards the elevators. Forgot something from the truck and once turned back towards the truck noticed a MASSIVE oil spill underneath. Easily 2-4 qts ALL Over. Also had a trail of oil ALL the way down 6 floors out to the street. Truck had little to no oil left in the motor.
Truck runs/ran fine, numbers for ICP and HPOP all normal. Truck will still start fine and run fine. No codes, no surging, no rough idle nothing odd other than a MASSIVE and almost instant oil leaking once started.
About a week before this happened I changed the ICP and pigtail. I understand I used a cheaper version of it, and it just might be the ICP, but I stuck my hand back there, and felt just a little oil (im guessing residual from the previous faulty one) After I changed the ICP I noticed I will had oil leaking from somewhere. Is it possible that I just finally blew out what was still leaking?
I have an early 04 so 03 motor. Seems like no real wet oil spots before the turbo area. I'm planning on tearing her down friday, but would like to know really what to focus on. I thought the pressure switch, but specifically looked there while it was running. Oil is traveling from where the ICP is located (roughly) left (Driver side mostly) but will get some on right (Passenger side) of bell housing.
I tried looking under turbo and didnt see much wet under there. I can't imagine the ICP i just installed could be blown out and dumping THAT much oil. Within 10 seconds it's dripping heavy, within a minute of running there is a football size puddle on the ground. Will drip for another few minutes after shutoff.
I thought of oil filter and pressure sender but like I said couldn't see any wet pools of oil. What else under the turbo area could leak THAT much oil so quickly?
Ford Super Duty (1999-2016) :: 2009 F250 - Rear Diff Fluid Change / Pinion Seal Leaking
I just picked up an 09 F250 a couple of weeks ago and I was planning on replacing all the fluids since I'm not sure when everything had been done in the past, but it did pull a camper 5th wheel. It has about 93000 Km/57000mi on it
One thing I noticed when reading the manual is that a rear diff fluid change is not necessary on these rear axles unless they have been submerged in water or repaired etc..
Just after I got it I noticed the pinion seal was leaking. It was fixed under warranty but the dealer did not replace the diff fluid as they said Ford will not pay for it.
My question is do you think I need to replace the diff fluid or should it still be good, given the relatively low mileage.
Ford Super Duty (1999-2016) :: Adding Fog Lights To 2012 F250 XLT?
I read in a thread about how fog lights need the auto light sensor or something in the kit to be installed and flashed.
My truck is a 2012 f250 XLT that I bought left over from a podunk town IN illinois. It does not have fog lights but it Does have automatic head lamps. So Im very confused on what kit to order to add fog lights to my truck.
Ford Super Duty (1999-2016) :: 2012 F250 - Hissing Between Shifts When Run WOT
2012 F-250 6.2 gas 4X4 SC/SB: when I run WOT, or near that, from a slow speed, I hear a short "hiss" between the 1-2, 2-3, and i think 3-4 shifts. I can also feel that the engine eases up quite a bit during the shift, and it is kind of a slow, soft shift. It has about 2,000 miles on it. I bought it in March 2013 as a leftover (great price!). The door sticker says it was manufactured in 4/2012, so it sat on the lot for quite a while before i bought it. But i don't remember it doing this when it was newer (~500 miles).
With the lite weight of this configuration (it is an XL so it isn't even carrying around 4 speakers ha ha), and me rarely carrying a very heavy load (yet) or towing anything, I rarely have to step on it very much in normal driving... it hardly ever gets above 2,500 rpm unless I am just running it faster for fun.
The hiss and slow shift happen at any transmission temperature. Of course, it never has been above the left side of the "gear" pic on the temp gauge, where it always is after full warm-up. Well, I'm hoping it is just shifting soft like this because it has "learned" my lite-foot driving style (even when I'm in a hurry of course the engine rarely has to work very hard).
Ford Super Duty (1999-2016) :: 2012 F250 - AM / FM / CD / AUX No Radio Display?
I've got a 2012 F250 XLT with AM/FM/CD/AUX radio, and the display is not working. The radio functions fine, as do all other electronics on the truck, but the display is dark. I've tried pulling Fuse #29 in the passenger kick panel, and it looked fine. Is my radio toast?
View 3 RepliesFord Super Duty (1999-2016) :: 2012 F250 6.2L - Misfiring On Multiple Cylinders
I have a 2012 F250, 6.2L, Crew Cab, FX4 with a little over 77,000 miles on it. I bought it used from a Ford dealership last summer. Prior to now, I've only had one issue with it and that was squirrel/rodent induced. Something chewed through the wiring harness right before the connection to the #7 cylinder. There was enough left over wire to solder it back together and put heat shrink around each wire.
It ran fine up until last weekend. The wife and I went to a store, she was driving and parked like a total jerk right in the front area of the parking lot. When we got back in the truck, she started it up and it was just running rough with hardly any power. My first thought was someone dumped something into the gas due to her amazing parking, but there were no smells or residue of anything near the gas cap when we got home only a couple miles away.
When I got home I ran my code scanner and found 300, 301, 305, 307, and 308. I dumped a bottle of ISO-Heet in it, let it sit for a bit then cranked her up and ran it for a few miles to the gas station and filled up...about 25/26 gallons, I don't remember...I was a little above 1/4 tank when this all started. No change in performance and the codes were all still the same. I pulled the MAF, it looked clean, but I wiped it down anyways and threw it back in. No change. I then changed all the plugs. This took care of 301 and 305 but 300, 307, and 308 were still coming up. I then picked up two new coil packs for cylinders 7 and 8, threw them on and still no change.
I sat with it running on a flat surface for a little while revving the engine randomly for about 15 minutes, during this I noticed a fast tapping noise at about 3400 RPM, it went away quickly with no changes in the gauges on the dash. I cant really tell where it's coming from, but kinda sounds like its under the middle of the truck. While sitting there I ran the codes again, and now its back to 300, 301, 307, and 308. I'm now at a loss of what to even look at...
I've also checked the voltage coming off the harness at the connector to the coil packs...just under 11 volts. I've searched all over for what that voltage is supposed to be, but have failed miserably in my searches.
Ford Super Duty (1999-2016) :: 2012 F250 - Replacing Shocks And Airbags?
I have a 2012 F250 King Ranch with the FX4 package. I have a goose neck ball and have recently bought a 37' fifth wheel. The rear of my truck sits a touch lower than the front and anytime I'm hooked to a trailer it looks to be squatted way down. It actually is dropping maybe 3". I am looking to replace the shocks which are Rancho's as I have 55k miles on. I'm wondering about shock types, air bags, springs??? Just don't know what my best option is.
View 9 RepliesFord Super Duty (1999-2016) :: 2012 F250 XLT Stalling - Idle Drop To 500
I just purchased a 2012 F250 XLT with the 6.2. It has 38,000 miles on it. Yesterday I noticed, when coming to a stop, the idle will sometimes drop below 500. The engine will stumble a little, then the RPM will jump up to 1,000. Twice it has stalled on me. When it stalls, the engine will restart just fine. No codes in the computer or warning lights on the dash.
I will be bringing it back to carmax, as it is under their 30 day warranty still. Hopefully they will be able to figure out something. I am thinking either the TB needs to be cleaned, or there is an issue with the canister purge valve. I saw the TSB for the CPV but it doesn't cover my truck.
Ford Super Duty (1999-2016) :: 2012 F250 Grinding Coming From Front End
I've been noticing a grinding coming from the front end of my 2012 f250 4x4, mostly while turning. It seems like its worse over uneven terrain, bumpy dirt roads, things like that, but I have noticed it on occasion while on seemingly smooth roads. Also a couple times while turning and lightly braking I could feel it interfere with the brakes. They wouldn't grab completely and you could feel the grinding in the pedal. I've been crawling around looking for rub marks or any indication of what might be causing it but until recently I hadn't noticed anything. Today though I found this. I'm guessing bad ball joint or tie rod maybe? Maybe just need alignment?
Passenger side lower control arm ...
Ford Super Duty (1999-2016) :: 2012 F250 - Rear Blocks Removal
I want to know if there are any issues when removing the rear block, also do I have to put a new block in or can I just leave it out ....
View 12 RepliesFord Super Duty (1999-2016) :: 2012 F250 - Fog Lights Stopped Working
2012 f250, fog lights stopped working and tried fixing yesterday. I'm getting 12.8v at the plug but as soon as you plug the light in it goes to 0. Ran a new ground from frame and the hot from plug and still nothing. High beams off, truck running and switch pulled out. Bulb is fine, hooked it straight to battery and it comes on. I though it was a faulty ground but by running a separate ground and still nothing. I'm at a lose.
View 2 RepliesFord Super Duty (1999-2016) :: 2012 F250 - Message Center Is Not Working At All
A buddy's 2012 f250 message center is not working at all. He replaced the fuse and it's still not working. The gauges work but not the high tech information center. He isn't sure if it's out of warranty because he can't see the miles. I'm not sure that's it's anywhere related but his back up sensors do not work either.
View 3 Replies